Re: [Patch v4 5/5] mcpm: exynos: populate suspend and powered_up callbacks

From: Chander Kashyap
Date: Tue May 13 2014 - 07:43:37 EST


Hi Lorenzo

On 9 May 2014 21:02, Lorenzo Pieralisi <lorenzo.pieralisi@xxxxxxx> wrote:
> On Mon, May 05, 2014 at 10:27:20AM +0100, Chander Kashyap wrote:
>> In order to support cpuidle through mcpm, suspend and powered-up
>> callbacks are required in mcpm platform code.
>> Hence populate the same callbacks.
>>
>> Signed-off-by: Chander Kashyap <chander.kashyap@xxxxxxxxxx>
>> Signed-off-by: Chander Kashyap <k.chander@xxxxxxxxxxx>
>> ---
>> Changes in v4: None
>> Changes in v3:
>> 1. Removed coherancy enablement after suspend failure.
>
> coherency
>
>> 2. Use generic function to poweron cpu.
>> changes in v2:
>> 1. Fixed typo: enynos_pmu_cpunr to exynos_pmu_cpunr
>> arch/arm/mach-exynos/mcpm-exynos.c | 34 ++++++++++++++++++++++++++++++++++
>> 1 file changed, 34 insertions(+)
>>
>> diff --git a/arch/arm/mach-exynos/mcpm-exynos.c b/arch/arm/mach-exynos/mcpm-exynos.c
>> index d0f7461..6d4a907 100644
>> --- a/arch/arm/mach-exynos/mcpm-exynos.c
>> +++ b/arch/arm/mach-exynos/mcpm-exynos.c
>> @@ -256,10 +256,44 @@ static int exynos_power_down_finish(unsigned int cpu, unsigned int cluster)
>> return -ETIMEDOUT; /* timeout */
>> }
>>
>> +void exynos_powered_up(void)
>
> static ?

Ok, done

>
>> +{
>> + unsigned int mpidr, cpu, cluster;
>> +
>> + mpidr = read_cpuid_mpidr();
>> + cpu = MPIDR_AFFINITY_LEVEL(mpidr, 0);
>> + cluster = MPIDR_AFFINITY_LEVEL(mpidr, 1);
>> +
>> + arch_spin_lock(&exynos_mcpm_lock);
>> + if (cpu_use_count[cpu][cluster] == 0)
>> + cpu_use_count[cpu][cluster] = 1;
>> + arch_spin_unlock(&exynos_mcpm_lock);
>> +}
>> +
>> +static void exynos_suspend(u64 residency)
>> +{
>> + unsigned int mpidr, cpunr;
>> +
>> + mpidr = read_cpuid_mpidr();
>> + cpunr = exynos_pmu_cpunr(mpidr);
>
> If I were to be picky, I would compute these values only if they
> are needed, ie move the computation after exynos_power_down().

Yes thats make sense. I will realign it.

>
> There is another quite horrible issue here. We know this code works
> because the processors A15/A7 hit the caches with C bit in SCTLR cleared.
>
> On processors where this is not true, this sequence would explode
> if power down fails (in case core is gated but L2 is still powered on,
> the stack is stuck in L2) since it is going to read stack data that is
> in L2 but can't be read.
>
> It is not related to this sequence only, but it is an issue in general
> and wanted to mention that on the lists for public awareness.
>

Can you please elaborate. I didn't understand.

> The gist of what I am saying is, please add a comment to that extent,
> here and it should be added in exynos_power_down() too.
>
>> + __raw_writel(virt_to_phys(mcpm_entry_point), ns_sram_base_addr + 0x1c);
>
> No magic numbers please (0x1c). You can add a macro/wrapper, as TC2 does.

Yes i will remove it.

>
>> + exynos_power_down();
>> +
>> + /*
>> + * Execution reaches here only if cpu did not power down.
>> + * Hence roll back the changes done in exynos_power_down function.
>> + */
>> + exynos_cpu_powerup(cpunr);
>
> Please be aware that if this function returns MCPM will soft reboot, and
> the CPUidle driver will have no way to detect a state entry failure.
>
> I am just flagging this up, since fixing this behaviour is not easy, and
> honestly, since power down failure should be the exception not the rule,
> the idle stats should not be affected much.
>
> I think this is the proper way of implementing the sequence but please
> all keep in mind what I wrote above.
>
> Lorenzo
>
>> +}
>> +
>> static const struct mcpm_platform_ops exynos_power_ops = {
>> .power_up = exynos_power_up,
>> .power_down = exynos_power_down,
>> .power_down_finish = exynos_power_down_finish,
>> + .suspend = exynos_suspend,
>> + .powered_up = exynos_powered_up,
>> };
>>
>> static void __init exynos_mcpm_usage_count_init(void)
>> --
>> 1.7.9.5
>>
>>
>



--
with warm regards,
Chander Kashyap
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/