[PATCH 3.4 16/22] rtlwifi: rtl8192se: Fix too long disable of IRQs

From: Greg Kroah-Hartman
Date: Sun May 11 2014 - 15:29:28 EST


3.4-stable review patch. If anyone has any objections, please let me know.

------------------

From: Larry Finger <Larry.Finger@xxxxxxxxxxxx>

commit 2610decdd0b3808ba20471a999835cfee5275f98 upstream.

In commit f78bccd79ba3cd9d9664981b501d57bdb81ab8a4 entitled "rtlwifi:
rtl8192ce: Fix too long disable of IRQs", Olivier Langlois
<olivier@xxxxxxxxxxxxxx> fixed a problem caused by an extra long disabling
of interrupts. This patch makes the same fix for rtl8192se.

Signed-off-by: Larry Finger <Larry.Finger@xxxxxxxxxxxx>
Signed-off-by: John W. Linville <linville@xxxxxxxxxxxxx>
Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>

---
drivers/net/wireless/rtlwifi/rtl8192se/hw.c | 27 +++++++++++++++++++++------
1 file changed, 21 insertions(+), 6 deletions(-)

--- a/drivers/net/wireless/rtlwifi/rtl8192se/hw.c
+++ b/drivers/net/wireless/rtlwifi/rtl8192se/hw.c
@@ -922,7 +922,7 @@ int rtl92se_hw_init(struct ieee80211_hw
struct rtl_pci *rtlpci = rtl_pcidev(rtl_pcipriv(hw));
struct rtl_efuse *rtlefuse = rtl_efuse(rtl_priv(hw));
u8 tmp_byte = 0;
-
+ unsigned long flags;
bool rtstatus = true;
u8 tmp_u1b;
int err = false;
@@ -934,6 +934,16 @@ int rtl92se_hw_init(struct ieee80211_hw

rtlpci->being_init_adapter = true;

+ /* As this function can take a very long time (up to 350 ms)
+ * and can be called with irqs disabled, reenable the irqs
+ * to let the other devices continue being serviced.
+ *
+ * It is safe doing so since our own interrupts will only be enabled
+ * in a subsequent step.
+ */
+ local_save_flags(flags);
+ local_irq_enable();
+
rtlpriv->intf_ops->disable_aspm(hw);

/* 1. MAC Initialize */
@@ -951,7 +961,8 @@ int rtl92se_hw_init(struct ieee80211_hw
RT_TRACE(rtlpriv, COMP_ERR, DBG_WARNING,
"Failed to download FW. Init HW without FW now... "
"Please copy FW into /lib/firmware/rtlwifi\n");
- return 1;
+ err = 1;
+ goto exit;
}

/* After FW download, we have to reset MAC register */
@@ -964,7 +975,8 @@ int rtl92se_hw_init(struct ieee80211_hw
/* 3. Initialize MAC/PHY Config by MACPHY_reg.txt */
if (!rtl92s_phy_mac_config(hw)) {
RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG, "MAC Config failed\n");
- return rtstatus;
+ err = rtstatus;
+ goto exit;
}

/* Make sure BB/RF write OK. We should prevent enter IPS. radio off. */
@@ -974,7 +986,8 @@ int rtl92se_hw_init(struct ieee80211_hw
/* 4. Initialize BB After MAC Config PHY_reg.txt, AGC_Tab.txt */
if (!rtl92s_phy_bb_config(hw)) {
RT_TRACE(rtlpriv, COMP_INIT, DBG_EMERG, "BB Config failed\n");
- return rtstatus;
+ err = rtstatus;
+ goto exit;
}

/* 5. Initiailze RF RAIO_A.txt RF RAIO_B.txt */
@@ -1010,7 +1023,8 @@ int rtl92se_hw_init(struct ieee80211_hw

if (!rtl92s_phy_rf_config(hw)) {
RT_TRACE(rtlpriv, COMP_INIT, DBG_DMESG, "RF Config failed\n");
- return rtstatus;
+ err = rtstatus;
+ goto exit;
}

/* After read predefined TXT, we must set BB/MAC/RF
@@ -1084,8 +1098,9 @@ int rtl92se_hw_init(struct ieee80211_hw

rtlpriv->cfg->ops->led_control(hw, LED_CTL_POWER_ON);
rtl92s_dm_init(hw);
+exit:
+ local_irq_restore(flags);
rtlpci->being_init_adapter = false;
-
return err;
}



--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/