Re: [PATCH 2/2] ARM: dts: berlin: add GPIO nodes for the BG2Q

From: Sebastian Hesselbarth
Date: Tue Apr 15 2014 - 05:23:23 EST


On 04/15/2014 10:07 AM, Antoine TÃnart wrote:
The Marvell Berlin BG2Q has 6 GPIO ports compatible with the snps,dw-apb-gpio
driver. This patch add the corresponding device tree nodes.

Signed-off-by: Antoine TÃnart <antoine.tenart@xxxxxxxxxxxxxxxxxx>
---
arch/arm/boot/dts/berlin2q.dtsi | 102 ++++++++++++++++++++++++++++++++++++++++
1 file changed, 102 insertions(+)

diff --git a/arch/arm/boot/dts/berlin2q.dtsi b/arch/arm/boot/dts/berlin2q.dtsi
index e6e556055dfc..b2625f896bc5 100644
--- a/arch/arm/boot/dts/berlin2q.dtsi
+++ b/arch/arm/boot/dts/berlin2q.dtsi
@@ -109,6 +109,78 @@
ranges = <0 0xe80000 0x10000>;
interrupt-parent = <&aic>;

+ gpio0: gpio@0400 {
+ compatible = "snps,dw-apb-gpio";
+ reg = <0x0400 0x400>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ porta: gpio-controller@0 {

ePAPR recommended name is even more generic, i.e. "gpio". If
that clashed in any way with other numbered names, I suggest
to rename to "gpio-port" as actually the controller is the
parent node and this represents one port (in the nomenclature
of DW-APB-GPIO).

+ compatible = "snps,dw-apb-gpio-port";
+ gpio-controller;
+ #gpio-cells = <2>;
+ snps,nr-gpios = <32>;

32 gpio pins for each of the 6 GPIO controllers? Either BG2Q is a GPIO
beast or it is a mistake :P

Can you please double-check?

I am fine with using nr-gpios property now, but I guess BG2Q also
has that CONFIG[1,2] registers to actually read out the features
synthesized in? If I find some time, I'll prepare a patch for
dw-apb-gpio to exploit that (optional) information instead of
using nr-gpios.

Otherwise,

Acked-by: Sebastian Hesselbarth <sebastian.hesselbarth@xxxxxxxxx>

+ reg = <0>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ interrupts = <0>;
+ };
+ };
+
+ gpio1: gpio@0800 {
+ compatible = "snps,dw-apb-gpio";
+ reg = <0x0800 0x400>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ portb: gpio-controller@1 {
+ compatible = "snps,dw-apb-gpio-port";
+ gpio-controller;
+ #gpio-cells = <2>;
+ snps,nr-gpios = <32>;
+ reg = <0>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ interrupts = <1>;
+ };
+ };
+
+ gpio2: gpio@0c00 {
+ compatible = "snps,dw-apb-gpio";
+ reg = <0x0c00 0x400>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ portc: gpio-controller@2 {
+ compatible = "snps,dw-apb-gpio-port";
+ gpio-controller;
+ #gpio-cells = <2>;
+ snps,nr-gpios = <32>;
+ reg = <0>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ interrupts = <2>;
+ };
+ };
+
+ gpio3: gpio@1000 {
+ compatible = "snps,dw-apb-gpio";
+ reg = <0x1000 0x400>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ portd: gpio-controller@3 {
+ compatible = "snps,dw-apb-gpio-port";
+ gpio-controller;
+ #gpio-cells = <2>;
+ snps,nr-gpios = <32>;
+ reg = <0>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ interrupts = <3>;
+ };
+ };
+
timer0: timer@2c00 {
compatible = "snps,dw-apb-timer";
reg = <0x2c00 0x14>;
@@ -181,6 +253,36 @@
interrupt-parent = <&gic>;
interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
};
+
+ gpio4: gpio@5000 {
+ compatible = "snps,dw-apb-gpio";
+ reg = <0x5000 0x400>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ porte: gpio-controller@4 {
+ compatible = "snps,dw-apb-gpio-port";
+ gpio-controller;
+ #gpio-cells = <2>;
+ snps,nr-gpios = <32>;
+ reg = <0>;
+ };
+ };
+
+ gpio5: gpio@c000 {
+ compatible = "snps,dw-apb-gpio";
+ reg = <0xc000 0x400>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ portf: gpio-controller@5 {
+ compatible = "snps,dw-apb-gpio-port";
+ gpio-controller;
+ #gpio-cells = <2>;
+ snps,nr-gpios = <32>;
+ reg = <0>;
+ };
+ };
};

pinctrl: pinctrl@0 {


--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/