[PATCH 1/2] tty serial: xr17c15x driver

From: Michael Welling
Date: Thu Apr 10 2014 - 00:05:01 EST


Signed-off-by: Michael Welling <mwelling@xxxxxxxx>
---
drivers/tty/serial/Kconfig | 9 +-
drivers/tty/serial/Makefile | 1 +
drivers/tty/serial/xr17c15x.c | 1540 +++++++++++++++++++++++++++++++++++++++++
3 files changed, 1549 insertions(+), 1 deletion(-)
create mode 100644 drivers/tty/serial/xr17c15x.c

diff --git a/drivers/tty/serial/Kconfig b/drivers/tty/serial/Kconfig
index 2e6d8dd..4f61582 100644
--- a/drivers/tty/serial/Kconfig
+++ b/drivers/tty/serial/Kconfig
@@ -223,7 +223,7 @@ config SERIAL_SAMSUNG_UARTS
help
Select the number of available UART ports for the Samsung S3C
serial driver
-
+
config SERIAL_SAMSUNG_DEBUG
bool "Samsung SoC serial debug"
depends on SERIAL_SAMSUNG && DEBUG_LL
@@ -1507,6 +1507,13 @@ config SERIAL_ST_ASC_CONSOLE
depends on SERIAL_ST_ASC=y
select SERIAL_CORE_CONSOLE

+config SERIAL_XR17C15X
+ tristate "Exar xr17c15x support"
+ depends on PCI
+ select SERIAL_CORE
+ help
+ This driver supports the Exar xr17c15x series serial ports.
+
endmenu

endif # TTY
diff --git a/drivers/tty/serial/Makefile b/drivers/tty/serial/Makefile
index 3680854..8921041 100644
--- a/drivers/tty/serial/Makefile
+++ b/drivers/tty/serial/Makefile
@@ -87,3 +87,4 @@ obj-$(CONFIG_SERIAL_EFM32_UART) += efm32-uart.o
obj-$(CONFIG_SERIAL_ARC) += arc_uart.o
obj-$(CONFIG_SERIAL_RP2) += rp2.o
obj-$(CONFIG_SERIAL_FSL_LPUART) += fsl_lpuart.o
+obj-$(CONFIG_SERIAL_XR17C15X) += xr17c15x.o
diff --git a/drivers/tty/serial/xr17c15x.c b/drivers/tty/serial/xr17c15x.c
new file mode 100644
index 0000000..f8963e1
--- /dev/null
+++ b/drivers/tty/serial/xr17c15x.c
@@ -0,0 +1,1540 @@
+/*
+ * xr1715x.c -- EXAR multiport serial driver.
+ *
+ * Updated and tested with the 3.10.0 kernel
+ *
+ * Copyright (C) 2010 Exar Corporation.
+ *
+ * Based on Linux 2.6.31 Kernel's drivers/serial/8250.c and /8250_pci.c
+ *
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/tty.h>
+#include <linux/ioport.h>
+#include <linux/init.h>
+#include <linux/console.h>
+#include <linux/sysrq.h>
+#include <linux/delay.h>
+#include <linux/device.h>
+#include <linux/pci.h>
+#include <linux/sched.h>
+#include <linux/string.h>
+#include <linux/kernel.h>
+#include <linux/slab.h>
+
+#include <linux/serial_reg.h>
+#include <linux/serial.h>
+#include <linux/serial_core.h>
+#include <linux/tty_flip.h>
+
+#include <linux/io.h>
+#include <asm/irq.h>
+#include <asm/irq.h>
+#include <linux/bitops.h>
+#include <asm/byteorder.h>
+#include <linux/serial.h>
+#include <linux/uaccess.h>
+
+#define _INLINE_ inline
+
+/*
+ * Definitions for PCI support.
+ */
+#define FL_BASE_MASK 0x0007
+#define FL_BASE0 0x0000
+#define FL_GET_BASE(x) (x & FL_BASE_MASK)
+
+#define NR_PORTS 128 /* we can support more too */
+
+#define XR_MAJOR 30
+#define XR_MINOR 0
+
+/*
+ * The special register set for XR17c15x UARTs.
+ */
+
+#define XR_17C15X_EXTENDED_FCTR 8
+#define XR_17C15X_EXTENDED_EFR 9
+#define XR_17C15X_TXFIFO_CNT 10
+#define XR_17C15X_RXFIFO_CNT 11
+#define XR_17C15X_EXTENDED_RXTRG 11
+
+#define XR_17C15X_FCTR_RTS_8DELAY 0x03
+#define XR_17C15X_FCTR_TRGD 192
+
+/* 17V15X TX/RX memory mapped buffer offsets */
+
+#define UART_17C15X_RX_OFFSET 0x100
+#define UART_17C15X_TX_OFFSET 0x100
+
+/*
+ * These are the EXTENDED definitions for the 17C15X's Interrupt
+ * Enable Register
+ */
+#define XR_17C15X_IER_RTSDTR 0x40
+#define XR_17C15X_IER_CTSDSR 0x80
+
+#define PCI_NUM_BAR_RESOURCES 6
+
+#define ALPHA_KLUDGE_MCR 0
+
+struct serial_private {
+ struct pci_dev *dev;
+ unsigned int nr;
+ void *remapped_bar[PCI_NUM_BAR_RESOURCES];
+ struct pci_serial_quirk *quirk;
+ int line[0];
+};
+
+struct pciserial_board {
+ unsigned int flags;
+ unsigned int num_ports;
+ unsigned int base_baud;
+ unsigned int uart_offset;
+ unsigned int reg_shift;
+ unsigned int first_offset;
+};
+
+/*
+ * init function returns:
+ * > 0 - number of ports
+ * = 0 - use board->num_ports
+ * < 0 - error
+ */
+struct pci_serial_quirk {
+ u32 vendor;
+ u32 device;
+ u32 subvendor;
+ u32 subdevice;
+ int (*init)(struct pci_dev *dev);
+ int (*setup)(struct serial_private *, struct pciserial_board *,
+ struct uart_port *, int);
+ void (*exit)(struct pci_dev *dev);
+};
+
+/*
+ * This is the configuration table for all of the PCI serial boards
+ * which we support. It is directly indexed by the xrpci_board_num_t enum
+ * value, which is encoded in the pci_device_id PCI probe table's
+ * driver_data member.
+ *
+ * The makeup of these names are:
+ * pbn_bn{_bt}_n_baud
+ *
+ * bn = PCI BAR number
+ * bt = Index using PCI BARs
+ * n = number of serial ports
+ * baud = baud rate
+ *
+ * Please note: in theory if n = 1, _bt infix should make no difference.
+ * ie, pbn_b0_1_115200 is the same as pbn_b0_bt_1_115200
+ */
+enum xrpci_board_num_t {
+ xr_8port = 0,
+ xr_4port,
+ xr_2port
+};
+
+static struct pciserial_board xrpciserial_boards[] = {
+ [xr_8port] = {
+ .flags = FL_BASE0,
+ .num_ports = 8,
+ .base_baud = 921600,
+ .uart_offset = 0x200,
+ .reg_shift = 0,
+ .first_offset = 0,
+ },
+
+ [xr_4port] = {
+ .flags = FL_BASE0,
+ .num_ports = 4,
+ .base_baud = 921600,
+ .uart_offset = 0x200,
+ .reg_shift = 0,
+ .first_offset = 0,
+ },
+ [xr_2port] = {
+ .flags = FL_BASE0,
+ .num_ports = 2,
+ .base_baud = 921600,
+ .uart_offset = 0x200,
+ .reg_shift = 0,
+ .first_offset = 0,
+ },
+};
+
+/*
+ * Configuration:
+ * share_irqs - whether we pass SA_SHIRQ to request_irq(). This option
+ * is unsafe when used on edge-triggered interrupts.
+ */
+#define SERIALEXAR_SHARE_IRQS 1
+unsigned int share_irqs = SERIALEXAR_SHARE_IRQS;
+
+/*
+ * Debugging.
+ */
+#if 0
+#define DEBUG_AUTOCONF(fmt...) printk(fmt)
+#else
+#define DEBUG_AUTOCONF(fmt...) do { } while (0)
+#endif
+
+#if 0
+#define DEBUG_INTR(fmt...) printk(fmt)
+#else
+#define DEBUG_INTR(fmt...) do { } while (0)
+#endif
+
+#define PASS_LIMIT 256
+
+/*
+ * We default to IRQ0 for the "no irq" hack. Some
+ * machine types want others as well - they're free
+ * to redefine this in their header file.
+ */
+#define is_real_interrupt(irq) ((irq) != 0)
+
+struct uart_xr_port {
+ struct uart_port port;
+ struct timer_list timer; /* "no irq" timer */
+ struct list_head list; /* ports on this IRQ */
+ unsigned short capabilities; /* port capabilities */
+ unsigned short bugs; /* port bugs */
+ unsigned int tx_loadsz; /* transmit fifo load size */
+ unsigned char acr;
+ unsigned char ier;
+ unsigned char lcr;
+ unsigned char mcr;
+ unsigned char mcr_mask; /* mask of user bits */
+ unsigned char mcr_force; /* mask of forced bits */
+ unsigned char lsr_break_flag;
+
+ /*
+ * We provide a per-port pm hook.
+ */
+ void (*pm)(struct uart_port *port,
+ unsigned int state, unsigned int old);
+};
+
+/*
+struct irq_info {
+ spinlock_t lock;
+ struct list_head *head;
+};
+
+static struct irq_info irq_lists[NR_IRQS];
+*/
+
+struct irq_info {
+ struct hlist_node node;
+ int irq;
+ spinlock_t lock; /* Protects list not the hash */
+ struct list_head *head;
+};
+
+#define NR_IRQ_HASH 32 /* Can be adjusted later */
+static struct hlist_head irq_lists[NR_IRQ_HASH];
+static DEFINE_MUTEX(hash_mutex); /* Used to walk the hash */
+
+
+
+
+
+struct serial_uart_config {
+ char *name;
+ int dfl_xmit_fifo_size;
+ int flags;
+};
+
+/*
+ * Here we define the default xmit fifo size used for each type of UART.
+ */
+#define PORT_MAX_XR 1
+#define XRPCI_TYPE 1 /* the second entry that is [1] in the array */
+static const struct serial_uart_config uart_config[PORT_MAX_XR + 1] = {
+ {"Unknown", 1, 0},
+ {"XR17c15x", 64, 0},
+};
+
+static int
+setup_port(struct serial_private *priv, struct uart_port *port,
+ int bar, int offset, int regshift)
+{
+ struct pci_dev *dev = priv->dev;
+ unsigned long base, len;
+
+ if (bar >= PCI_NUM_BAR_RESOURCES)
+ return -EINVAL;
+
+ base = pci_resource_start(dev, bar);
+
+ if (pci_resource_flags(dev, bar) & IORESOURCE_MEM) {
+ len = pci_resource_len(dev, bar);
+ if (!priv->remapped_bar[bar])
+ priv->remapped_bar[bar] = ioremap(base, len);
+ if (!priv->remapped_bar[bar])
+ return -ENOMEM;
+
+ port->iotype = UPIO_MEM;
+ port->iobase = 0;
+ port->mapbase = base + offset;
+ port->membase = priv->remapped_bar[bar] + offset;
+ port->regshift = regshift;
+ } else {
+ /* Exar's got to be memory mapped.
+ * Some hardware reading error? */
+ return -EINVAL;
+ }
+ return 0;
+}
+
+static int
+pci_default_setup(struct serial_private *priv, struct pciserial_board *board,
+ struct uart_port *port, int idx)
+{
+ unsigned int bar, offset = board->first_offset;
+
+ bar = FL_GET_BASE(board->flags);
+ offset += idx * board->uart_offset;
+
+ return setup_port(priv, port, bar, offset, board->reg_shift);
+}
+
+/*
+ * Master list of serial port init/setup/exit quirks.
+ * This does not describe the general nature of the port.
+ * (ie, baud base, number and location of ports, etc)
+ *
+ * This list is ordered alphabetically by vendor then device.
+ * Specific entries must come before more generic entries.
+ */
+static struct pci_serial_quirk pci_serial_quirks[] = {
+ {
+ .vendor = 0x13a8,
+ .device = 0x158,
+ .subvendor = PCI_ANY_ID,
+ .subdevice = PCI_ANY_ID,
+ .setup = pci_default_setup,
+ },
+
+ {
+ .vendor = 0x13a8,
+ .device = 0x154,
+ .subvendor = PCI_ANY_ID,
+ .subdevice = PCI_ANY_ID,
+ .setup = pci_default_setup,
+ },
+
+ {
+ .vendor = 0x13a8,
+ .device = 0x152,
+ .subvendor = PCI_ANY_ID,
+ .subdevice = PCI_ANY_ID,
+ .setup = pci_default_setup,
+ }
+};
+
+static inline int quirk_id_matches(u32 quirk_id, u32 dev_id)
+{
+ return quirk_id == PCI_ANY_ID || quirk_id == dev_id;
+}
+
+static struct pci_serial_quirk *find_quirk(struct pci_dev *dev)
+{
+ struct pci_serial_quirk *quirk;
+
+ for (quirk = pci_serial_quirks;; quirk++)
+ if (quirk_id_matches(quirk->vendor, dev->vendor) &&
+ quirk_id_matches(quirk->device, dev->device))
+ break;
+ return quirk;
+}
+
+static _INLINE_ unsigned int serial_in(struct uart_xr_port *up, int offset)
+{
+ offset <<= up->port.regshift;
+
+ switch (up->port.iotype) {
+ case SERIAL_IO_HUB6:
+ outb(up->port.hub6 - 1 + offset, up->port.iobase);
+ return inb(up->port.iobase + 1);
+
+ case SERIAL_IO_MEM:
+ return readb(up->port.membase + offset);
+
+ default:
+ return inb(up->port.iobase + offset);
+ }
+}
+
+static _INLINE_ void serial_out(struct uart_xr_port *up, int offset, int value)
+{
+ offset <<= up->port.regshift;
+
+ switch (up->port.iotype) {
+ case SERIAL_IO_HUB6:
+ outb(up->port.hub6 - 1 + offset, up->port.iobase);
+ outb(value, up->port.iobase + 1);
+ break;
+
+ case SERIAL_IO_MEM:
+ writeb(value, up->port.membase + offset);
+ break;
+
+ default:
+ outb(value, up->port.iobase + offset);
+ }
+}
+
+/*
+ * We used to support using pause I/O for certain machines. We
+ * haven't supported this for a while, but just in case it's badly
+ * needed for certain old 386 machines, I've left these #define's
+ * in....
+ */
+#define serial_inp(up, offset) serial_in(up, offset)
+#define serial_outp(up, offset, value) serial_out(up, offset, value)
+
+static void serialxr_stop_tx(struct uart_port *port)
+{
+ struct uart_xr_port *up = (struct uart_xr_port *)port;
+
+ if (up->ier & UART_IER_THRI) {
+ up->ier &= ~UART_IER_THRI;
+ serial_out(up, UART_IER, up->ier);
+ }
+}
+
+static void serialxr_start_tx(struct uart_port *port)
+{
+ struct uart_xr_port *up = (struct uart_xr_port *)port;
+
+ if (!(up->ier & UART_IER_THRI)) {
+ up->ier |= UART_IER_THRI;
+ serial_out(up, UART_IER, up->ier);
+ }
+}
+
+static void serialxr_stop_rx(struct uart_port *port)
+{
+ struct uart_xr_port *up = (struct uart_xr_port *)port;
+
+ up->ier &= ~UART_IER_RLSI;
+ up->port.read_status_mask &= ~UART_LSR_DR;
+ serial_out(up, UART_IER, up->ier);
+}
+
+static void serialxr_enable_ms(struct uart_port *port)
+{
+ struct uart_xr_port *up = (struct uart_xr_port *)port;
+
+ up->ier |= UART_IER_MSI;
+ serial_out(up, UART_IER, up->ier);
+}
+
+static _INLINE_ void receive_chars(struct uart_xr_port *up, int *status)
+{
+ struct tty_port *tty = &up->port.state->port;
+ unsigned char ch, lsr = *status;
+ int max_count = 256;
+ char flag;
+
+ do {
+ ch = serial_inp(up, UART_RX);
+ flag = TTY_NORMAL;
+ up->port.icount.rx++;
+
+ if (unlikely(lsr & (UART_LSR_BI | UART_LSR_PE |
+ UART_LSR_FE | UART_LSR_OE))) {
+ /*
+ * For statistics only
+ */
+ if (lsr & UART_LSR_BI) {
+ lsr &= ~(UART_LSR_FE | UART_LSR_PE);
+ up->port.icount.brk++;
+ /*
+ * We do the SysRQ and SAK checking
+ * here because otherwise the break
+ * may get masked by ignore_status_mask
+ * or read_status_mask.
+ */
+ if (uart_handle_break(&up->port))
+ goto ignore_char;
+ } else if (lsr & UART_LSR_PE)
+ up->port.icount.parity++;
+ else if (lsr & UART_LSR_FE)
+ up->port.icount.frame++;
+ if (lsr & UART_LSR_OE)
+ up->port.icount.overrun++;
+
+ /*
+ * Mask off conditions which should be ignored.
+ */
+ lsr &= up->port.read_status_mask;
+
+ if (lsr & UART_LSR_BI) {
+ DEBUG_INTR("handling break....");
+ flag = TTY_BREAK;
+ } else if (lsr & UART_LSR_PE)
+ flag = TTY_PARITY;
+ else if (lsr & UART_LSR_FE)
+ flag = TTY_FRAME;
+ }
+ if (uart_handle_sysrq_char(&up->port, ch))
+ goto ignore_char;
+
+ uart_insert_char(&up->port, lsr, UART_LSR_OE, ch, flag);
+
+ignore_char:
+ lsr = serial_inp(up, UART_LSR);
+ } while ((lsr & UART_LSR_DR) && (max_count-- > 0));
+ spin_unlock(&up->port.lock);
+ tty_flip_buffer_push(tty);
+ spin_lock(&up->port.lock);
+ *status = lsr;
+}
+
+static _INLINE_ void transmit_chars(struct uart_xr_port *up)
+{
+ struct circ_buf *xmit = &up->port.state->xmit;
+ int count, bytes_in_fifo;
+ int tmp;
+
+ if (uart_circ_empty(xmit) || uart_tx_stopped(&up->port)) {
+ serialxr_stop_tx(&up->port);
+ return;
+ }
+
+ bytes_in_fifo = serial_inp(up, XR_17C15X_TXFIFO_CNT);
+ /* read the fifo count untill we get the same value twice */
+ while (bytes_in_fifo != serial_inp(up, XR_17C15X_TXFIFO_CNT))
+ bytes_in_fifo = serial_inp(up, XR_17C15X_TXFIFO_CNT);
+
+ /* how much buffer is availabe now to write? */
+ count = up->port.fifosize - bytes_in_fifo;
+ if (uart_circ_chars_pending(xmit) < count)
+ count = uart_circ_chars_pending(xmit);
+
+ do {
+ /* if the count is more than (tail to end of the buffer),
+ * transmit only the rest here. tail+tmp&(UART_XMIT_SIZE-1)
+ * will reset the tail to the starting of the circular buffer
+ */
+ if (((xmit->tail+count) & (UART_XMIT_SIZE-1)) < xmit->tail) {
+ tmp = UART_XMIT_SIZE - xmit->tail;
+ memcpy(up->port.membase + UART_17C15X_TX_OFFSET,
+ &(xmit->buf[xmit->tail]), tmp);
+ xmit->tail += tmp;
+ xmit->tail &= (UART_XMIT_SIZE - 1);
+ up->port.icount.tx += tmp;
+
+ count -= tmp;
+ } else {
+ memcpy(up->port.membase + UART_17C15X_TX_OFFSET,
+ &(xmit->buf[xmit->tail]), count);
+ xmit->tail += count;
+ xmit->tail &= UART_XMIT_SIZE - 1;
+
+ up->port.icount.tx += count;
+ count = 0;
+ }
+
+ } while (count > 0);
+
+ if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
+ uart_write_wakeup(&up->port);
+
+ DEBUG_INTR("THRE...");
+
+ if (uart_circ_empty(xmit))
+ serialxr_stop_tx(&up->port);
+}
+
+static _INLINE_ void check_modem_status(struct uart_xr_port *up)
+{
+ int status;
+
+ status = serial_in(up, UART_MSR);
+
+ if ((status & UART_MSR_ANY_DELTA) == 0)
+ return;
+
+ if (status & UART_MSR_TERI)
+ up->port.icount.rng++;
+ if (status & UART_MSR_DDSR)
+ up->port.icount.dsr++;
+ if (status & UART_MSR_DDCD)
+ uart_handle_dcd_change(&up->port, status & UART_MSR_DCD);
+ if (status & UART_MSR_DCTS)
+ uart_handle_cts_change(&up->port, status & UART_MSR_CTS);
+
+ wake_up_interruptible(&up->port.state->port.delta_msr_wait);
+}
+
+/*
+ * This handles the interrupt from one port.
+ */
+static inline void serialxr_handle_port(struct uart_xr_port *up)
+{
+ unsigned int status = serial_inp(up, UART_LSR);
+
+ DEBUG_INTR("status = %x...", status);
+
+ if (status & UART_LSR_DR)
+ receive_chars(up, &status);
+ check_modem_status(up);
+ if (status & UART_LSR_THRE)
+ transmit_chars(up);
+}
+
+/*
+ * This is the serial driver's interrupt routine.
+ *
+ * Arjan thinks the old way was overly complex, so it got simplified.
+ * Alan disagrees, saying that need the complexity to handle the weird
+ * nature of ISA shared interrupts. (This is a special exception.)
+ *
+ * In order to handle ISA shared interrupts properly, we need to check
+ * that all ports have been serviced, and therefore the ISA interrupt
+ * line has been de-asserted.
+ *
+ * This means we need to loop through all ports. checking that they
+ * don't have an interrupt pending.
+ */
+static irqreturn_t serialxr_interrupt(int irq, void *dev_id)
+{
+ struct irq_info *i = dev_id;
+ struct list_head *l, *end = NULL;
+ int pass_counter = 0;
+
+ DEBUG_INTR("serialxr_interrupt(%d)...", irq);
+
+ spin_lock(&i->lock);
+
+ l = i->head;
+ do {
+ struct uart_xr_port *up;
+ unsigned int iir;
+
+ up = list_entry(l, struct uart_xr_port, list);
+
+ iir = serial_in(up, UART_IIR);
+ if (!(iir & UART_IIR_NO_INT)) {
+ spin_lock(&up->port.lock);
+ serialxr_handle_port(up);
+ spin_unlock(&up->port.lock);
+
+ end = NULL;
+ } else if (end == NULL)
+ end = l;
+
+ l = l->next;
+
+ if (l == i->head && pass_counter++ > PASS_LIMIT) {
+ /* If we hit this, we're dead. */
+ pr_err("serialxr: too much work for irq%d\n", irq);
+ break;
+ }
+ } while (l != end);
+
+ spin_unlock(&i->lock);
+
+ DEBUG_INTR("end.\n");
+ /* FIXME! Was it really ours? */
+ return IRQ_HANDLED;
+}
+
+/*
+ * To support ISA shared interrupts, we need to have one interrupt
+ * handler that ensures that the IRQ line has been deasserted
+ * before returning. Failing to do this will result in the IRQ
+ * line being stuck active, and, since ISA irqs are edge triggered,
+ * no more IRQs will be seen.
+ */
+static void serial_do_unlink(struct irq_info *i, struct uart_xr_port *up)
+{
+ spin_lock_irq(&i->lock);
+
+ if (!list_empty(i->head)) {
+ if (i->head == &up->list)
+ i->head = i->head->next;
+ list_del(&up->list);
+ } else {
+ BUG_ON(i->head != &up->list);
+ i->head = NULL;
+ }
+
+ spin_unlock_irq(&i->lock);
+ /* List empty so throw away the hash node */
+ if (i->head == NULL) {
+ hlist_del(&i->node);
+ kfree(i);
+ }
+}
+
+static int serial_link_irq_chain(struct uart_xr_port *up)
+{
+ struct hlist_head *h;
+ struct hlist_node *n;
+ struct irq_info *i;
+ int ret, irq_flags = up->port.flags & UPF_SHARE_IRQ ? IRQF_SHARED : 0;
+
+ mutex_lock(&hash_mutex);
+
+ h = &irq_lists[up->port.irq % NR_IRQ_HASH];
+
+ hlist_for_each(n, h) {
+ i = hlist_entry(n, struct irq_info, node);
+ if (i->irq == up->port.irq)
+ break;
+ }
+
+ if (n == NULL) {
+ i = kzalloc(sizeof(struct irq_info), GFP_KERNEL);
+ if (i == NULL) {
+ mutex_unlock(&hash_mutex);
+ return -ENOMEM;
+ }
+ spin_lock_init(&i->lock);
+ i->irq = up->port.irq;
+ hlist_add_head(&i->node, h);
+ }
+ mutex_unlock(&hash_mutex);
+
+ spin_lock_irq(&i->lock);
+
+ if (i->head) {
+ list_add(&up->list, i->head);
+ spin_unlock_irq(&i->lock);
+
+ ret = 0;
+ } else {
+ INIT_LIST_HEAD(&up->list);
+ i->head = &up->list;
+ spin_unlock_irq(&i->lock);
+ irq_flags |= up->port.irqflags;
+ ret = request_irq(up->port.irq, serialxr_interrupt,
+ irq_flags, "xrserial", i);
+ if (ret < 0)
+ serial_do_unlink(i, up);
+ }
+
+ return ret;
+}
+
+static void serial_unlink_irq_chain(struct uart_xr_port *up)
+{
+ struct irq_info *i;
+ struct hlist_node *n;
+ struct hlist_head *h;
+
+ mutex_lock(&hash_mutex);
+
+ h = &irq_lists[up->port.irq % NR_IRQ_HASH];
+
+ hlist_for_each(n, h) {
+ i = hlist_entry(n, struct irq_info, node);
+ if (i->irq == up->port.irq)
+ break;
+ }
+
+ BUG_ON(n == NULL);
+ BUG_ON(i->head == NULL);
+
+ if (list_empty(i->head))
+ free_irq(up->port.irq, i);
+
+ serial_do_unlink(i, up);
+ mutex_unlock(&hash_mutex);
+}
+
+/*
+ * This function is used to handle ports that do not have an
+ * interrupt. This doesn't work very well for 16450's, but gives
+ * barely passable results for a 16550A. (Although at the expense
+ * of much CPU overhead).
+ */
+static void serialxr_timeout(unsigned long data)
+{
+ struct uart_xr_port *up = (struct uart_xr_port *)data;
+ unsigned int timeout;
+ unsigned int iir;
+
+ iir = serial_in(up, UART_IIR);
+ if (!(iir & UART_IIR_NO_INT)) {
+ spin_lock(&up->port.lock);
+ serialxr_handle_port(up);
+ spin_unlock(&up->port.lock);
+ }
+
+ timeout = up->port.timeout;
+ timeout = timeout > 6 ? (timeout / 2 - 2) : 1;
+ mod_timer(&up->timer, jiffies + timeout);
+}
+
+static unsigned int serialxr_tx_empty(struct uart_port *port)
+{
+ struct uart_xr_port *up = (struct uart_xr_port *)port;
+ unsigned long flags;
+ unsigned int ret;
+
+ spin_lock_irqsave(&up->port.lock, flags);
+ ret = serial_in(up, UART_LSR) & UART_LSR_TEMT ? TIOCSER_TEMT : 0;
+ spin_unlock_irqrestore(&up->port.lock, flags);
+
+ return ret;
+}
+
+static unsigned int serialxr_get_mctrl(struct uart_port *port)
+{
+ struct uart_xr_port *up = (struct uart_xr_port *)port;
+ unsigned char status;
+ unsigned int ret;
+
+ status = serial_in(up, UART_MSR);
+
+ ret = 0;
+ if (status & UART_MSR_DCD)
+ ret |= TIOCM_CAR;
+ if (status & UART_MSR_RI)
+ ret |= TIOCM_RNG;
+ if (status & UART_MSR_DSR)
+ ret |= TIOCM_DSR;
+ if (status & UART_MSR_CTS)
+ ret |= TIOCM_CTS;
+ return ret;
+}
+
+static void serialxr_set_mctrl(struct uart_port *port, unsigned int mctrl)
+{
+ struct uart_xr_port *up = (struct uart_xr_port *)port;
+ unsigned char mcr = 0;
+
+ if (mctrl & TIOCM_RTS)
+ mcr |= UART_MCR_RTS;
+ if (mctrl & TIOCM_DTR)
+ mcr |= UART_MCR_DTR;
+ if (mctrl & TIOCM_OUT1)
+ mcr |= UART_MCR_OUT1;
+ if (mctrl & TIOCM_OUT2)
+ mcr |= UART_MCR_OUT2;
+ if (mctrl & TIOCM_LOOP)
+ mcr |= UART_MCR_LOOP;
+
+ mcr = (mcr & up->mcr_mask) | up->mcr_force;
+
+ serial_out(up, UART_MCR, mcr);
+}
+
+static void serialxr_break_ctl(struct uart_port *port, int break_state)
+{
+ struct uart_xr_port *up = (struct uart_xr_port *)port;
+ unsigned long flags;
+
+ spin_lock_irqsave(&up->port.lock, flags);
+ if (break_state == -1)
+ up->lcr |= UART_LCR_SBC;
+ else
+ up->lcr &= ~UART_LCR_SBC;
+ serial_out(up, UART_LCR, up->lcr);
+ spin_unlock_irqrestore(&up->port.lock, flags);
+}
+
+static int serialxr_startup(struct uart_port *port)
+{
+ struct uart_xr_port *up = (struct uart_xr_port *)port;
+ unsigned long flags;
+ int retval;
+
+ up->capabilities = uart_config[up->port.type].flags;
+
+ serial_out(up, XR_17C15X_EXTENDED_EFR, UART_EFR_ECB);
+ serial_out(up, UART_IER, 0);
+
+ /*
+ * Set the RX trigger level for 32 bytes,
+ * with a Hysteresis level of 8
+ * These are some default values, the OEMs can change these values
+ * according to their best case scenarios
+ */
+
+ serial_out(up, XR_17C15X_EXTENDED_RXTRG, 32);
+ serial_out(up, XR_17C15X_EXTENDED_FCTR,
+ XR_17C15X_FCTR_TRGD | XR_17C15X_FCTR_RTS_8DELAY);
+
+ serial_outp(up, UART_LCR, 0);
+
+ /* Wake up and initialize UART */
+ serial_out(up, XR_17C15X_EXTENDED_EFR, UART_EFR_ECB);
+ serial_out(up, UART_IER, 0);
+ serial_out(up, UART_LCR, 0);
+
+ /*
+ * Clear the FIFO buffers and disable them.
+ * (they will be reeanbled in set_termios())
+ */
+ serial_outp(up, UART_FCR, UART_FCR_ENABLE_FIFO |
+ UART_FCR_CLEAR_RCVR | UART_FCR_CLEAR_XMIT);
+ serial_outp(up, UART_FCR, 0);
+
+ /*
+ * Clear the interrupt registers.
+ */
+ (void)serial_inp(up, UART_LSR);
+ (void)serial_inp(up, UART_RX);
+ (void)serial_inp(up, UART_IIR);
+ (void)serial_inp(up, UART_MSR);
+
+ /*
+ * If the "interrupt" for this port doesn't correspond with any
+ * hardware interrupt, we use a timer-based system. The original
+ * driver used to do this with IRQ0.
+ */
+ if (!is_real_interrupt(up->port.irq)) {
+ unsigned int timeout = up->port.timeout;
+
+ timeout = timeout > 6 ? (timeout / 2 - 2) : 1;
+
+ up->timer.data = (unsigned long)up;
+ mod_timer(&up->timer, jiffies + timeout);
+ } else {
+ retval = serial_link_irq_chain(up);
+ if (retval)
+ return retval;
+ }
+
+ /*
+ * Now, initialize the UART
+ */
+ serial_outp(up, UART_LCR, UART_LCR_WLEN8);
+
+ spin_lock_irqsave(&up->port.lock, flags);
+
+ /*
+ * Most PC uarts need OUT2 raised to enable interrupts.
+ */
+ if (is_real_interrupt(up->port.irq))
+ up->port.mctrl |= TIOCM_OUT2;
+
+ serialxr_set_mctrl(&up->port, up->port.mctrl);
+ spin_unlock_irqrestore(&up->port.lock, flags);
+
+ /*
+ * Finally, enable interrupts. Note: Modem status interrupts
+ * are set via set_termios(), which will be occurring imminently
+ * anyway, so we don't enable them here.
+ */
+ up->ier = UART_IER_MSI | UART_IER_RLSI | UART_IER_RDI;
+ /* extra for XR17c15x */
+ up->ier |= XR_17C15X_IER_RTSDTR | XR_17C15X_IER_CTSDSR;
+ serial_outp(up, UART_IER, up->ier);
+
+ /*
+ * And clear the interrupt registers again for luck.
+ */
+ (void)serial_inp(up, UART_LSR);
+ (void)serial_inp(up, UART_RX);
+ (void)serial_inp(up, UART_IIR);
+ (void)serial_inp(up, UART_MSR);
+
+ return 0;
+}
+
+static void serialxr_shutdown(struct uart_port *port)
+{
+ struct uart_xr_port *up = (struct uart_xr_port *)port;
+ unsigned long flags;
+
+ /*
+ * Disable interrupts from this port
+ */
+ up->ier = 0;
+ serial_outp(up, UART_IER, 0);
+
+ spin_lock_irqsave(&up->port.lock, flags);
+
+ up->port.mctrl &= ~TIOCM_OUT2;
+
+ serialxr_set_mctrl(&up->port, up->port.mctrl);
+ spin_unlock_irqrestore(&up->port.lock, flags);
+
+ /*
+ * Disable break condition and FIFOs
+ */
+ serial_out(up, UART_LCR, serial_inp(up, UART_LCR) & ~UART_LCR_SBC);
+ serial_outp(up, UART_FCR, UART_FCR_ENABLE_FIFO |
+ UART_FCR_CLEAR_RCVR | UART_FCR_CLEAR_XMIT);
+ serial_outp(up, UART_FCR, 0);
+
+ /*
+ * Read data port to reset things, and then unlink from
+ * the IRQ chain.
+ */
+ (void)serial_in(up, UART_RX);
+
+ if (!is_real_interrupt(up->port.irq))
+ del_timer_sync(&up->timer);
+ else
+ serial_unlink_irq_chain(up);
+}
+
+static unsigned int serialxr_get_divisor(struct uart_port *port,
+ unsigned int baud)
+{
+ unsigned int quot;
+
+ quot = uart_get_divisor(port, baud);
+
+ return quot;
+}
+
+static void
+serialxr_set_termios(struct uart_port *port, struct ktermios *termios,
+ struct ktermios *old)
+{
+ struct uart_xr_port *up = (struct uart_xr_port *)port;
+ unsigned char cval;
+ unsigned long flags;
+ unsigned int baud, quot;
+
+ switch (termios->c_cflag & CSIZE) {
+ case CS5:
+ cval = 0x00;
+ break;
+ case CS6:
+ cval = 0x01;
+ break;
+ case CS7:
+ cval = 0x02;
+ break;
+ default:
+ case CS8:
+ cval = 0x03;
+ break;
+ }
+
+ if (termios->c_cflag & CSTOPB)
+ cval |= 0x04;
+ if (termios->c_cflag & PARENB)
+ cval |= UART_LCR_PARITY;
+ if (!(termios->c_cflag & PARODD))
+ cval |= UART_LCR_EPAR;
+#ifdef CMSPAR
+ if (termios->c_cflag & CMSPAR)
+ cval |= UART_LCR_SPAR;
+#endif
+
+ /*
+ * Ask the core to calculate the divisor for us.
+ */
+ baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk / 16);
+ quot = serialxr_get_divisor(port, baud);
+
+ /*
+ * Ok, we're now changing the port state. Do it with
+ * interrupts disabled.
+ */
+ spin_lock_irqsave(&up->port.lock, flags);
+
+ /*
+ * Update the per-port timeout.
+ */
+ uart_update_timeout(port, termios->c_cflag, baud);
+
+ up->port.read_status_mask = UART_LSR_OE | UART_LSR_THRE | UART_LSR_DR;
+ if (termios->c_iflag & INPCK)
+ up->port.read_status_mask |= UART_LSR_FE | UART_LSR_PE;
+ if (termios->c_iflag & (BRKINT | PARMRK))
+ up->port.read_status_mask |= UART_LSR_BI;
+
+ /*
+ * Characteres to ignore
+ */
+ up->port.ignore_status_mask = 0;
+ if (termios->c_iflag & IGNPAR)
+ up->port.ignore_status_mask |= UART_LSR_PE | UART_LSR_FE;
+ if (termios->c_iflag & IGNBRK) {
+ up->port.ignore_status_mask |= UART_LSR_BI;
+ /*
+ * If we're ignoring parity and break indicators,
+ * ignore overruns too (for real raw support).
+ */
+ if (termios->c_iflag & IGNPAR)
+ up->port.ignore_status_mask |= UART_LSR_OE;
+ }
+
+ /*
+ * ignore all characters if CREAD is not set
+ */
+ if ((termios->c_cflag & CREAD) == 0)
+ up->port.ignore_status_mask |= UART_LSR_DR;
+
+ /*
+ * CTS flow control flag and modem status interrupts
+ */
+ up->ier &= ~UART_IER_MSI;
+ if (UART_ENABLE_MS(&up->port, termios->c_cflag))
+ up->ier |= UART_IER_MSI;
+
+ serial_out(up, UART_IER, up->ier);
+
+ serial_outp(up, XR_17C15X_EXTENDED_EFR,
+ termios->c_cflag & CRTSCTS ? UART_EFR_CTS : 0);
+
+ serial_outp(up, UART_LCR, cval | UART_LCR_DLAB); /* set DLAB */
+
+ serial_outp(up, UART_DLL, quot & 0xff); /* LS of divisor */
+ serial_outp(up, UART_DLM, quot >> 8); /* MS of divisor */
+ serial_outp(up, UART_LCR, cval); /* reset DLAB */
+ up->lcr = cval; /* Save LCR */
+
+ serial_outp(up, UART_FCR, UART_FCR_ENABLE_FIFO); /* set fcr */
+
+ spin_unlock_irqrestore(&up->port.lock, flags);
+}
+
+/*
+ * EXAR ioctls
+ */
+/* #define FIOQSIZE 0x5460 */
+#define EXAR_READ_REG (FIOQSIZE + 1)
+#define EXAR_WRITE_REG (FIOQSIZE + 2)
+
+struct xrioctl_rw_reg {
+ unsigned char reg;
+ unsigned char regvalue;
+};
+/*
+ * This function is used to handle Exar Device specific ioctl calls
+ * The user level application should have defined the above ioctl
+ * commands with the above values to access these ioctls and the
+ * input parameters for these ioctls should be struct xrioctl_rw_reg
+ * The Ioctl functioning is pretty much self explanatory here in the code,
+ * and the register values should be between 0 to XR_17C15X_EXTENDED_RXTRG
+ */
+
+static int
+serialxr_ioctl(struct uart_port *port, unsigned int cmd, unsigned long arg)
+{
+ struct uart_xr_port *up = (struct uart_xr_port *)port;
+ int ret = -ENOIOCTLCMD;
+ struct xrioctl_rw_reg ioctlrwarg;
+
+ switch (cmd) {
+ case EXAR_READ_REG:
+ if (copy_from_user
+ (&ioctlrwarg, (void *)arg, sizeof(ioctlrwarg)))
+ return -EFAULT;
+ ioctlrwarg.regvalue = serial_inp(up, ioctlrwarg.reg);
+ if (copy_to_user((void *)arg, &ioctlrwarg, sizeof(ioctlrwarg)))
+ return -EFAULT;
+ ret = 0;
+ break;
+
+ case EXAR_WRITE_REG:
+ if (copy_from_user
+ (&ioctlrwarg, (void *)arg, sizeof(ioctlrwarg)))
+ return -EFAULT;
+ serial_outp(up, ioctlrwarg.reg, ioctlrwarg.regvalue);
+ ret = 0;
+ break;
+ }
+
+ return ret;
+}
+
+static void
+serialxr_pm(struct uart_port *port, unsigned int state, unsigned int oldstate)
+{
+ struct uart_xr_port *up = (struct uart_xr_port *)port;
+ if (state) {
+ /* sleep */
+ serial_outp(up, XR_17C15X_EXTENDED_EFR, UART_EFR_ECB);
+ serial_outp(up, UART_IER, UART_IERX_SLEEP);
+ serial_outp(up, XR_17C15X_EXTENDED_EFR, 0);
+
+ if (up->pm)
+ up->pm(port, state, oldstate);
+ } else {
+ /* wake */
+
+ /* Wake up UART */
+ serial_outp(up, XR_17C15X_EXTENDED_EFR, UART_EFR_ECB);
+ serial_outp(up, UART_IER, 0);
+ serial_outp(up, XR_17C15X_EXTENDED_EFR, 0);
+
+ if (up->pm)
+ up->pm(port, state, oldstate);
+ }
+}
+
+static void serialxr_release_port(struct uart_port *port)
+{
+}
+
+static int serialxr_request_port(struct uart_port *port)
+{
+ return 0;
+}
+
+static void serialxr_config_port(struct uart_port *port, int flags)
+{
+ struct uart_xr_port *up = (struct uart_xr_port *)port;
+
+ if (flags & UART_CONFIG_TYPE) {
+ up->port.type = XRPCI_TYPE;
+ up->port.fifosize =
+ uart_config[up->port.type].dfl_xmit_fifo_size;
+ up->capabilities = uart_config[up->port.type].flags;
+ }
+}
+
+static const char *serialxr_type(struct uart_port *port)
+{
+ int type = port->type;
+
+ if (type >= ARRAY_SIZE(uart_config))
+ type = 0;
+ return uart_config[type].name;
+}
+
+static struct uart_ops serialxr_pops = {
+ .tx_empty = serialxr_tx_empty,
+ .set_mctrl = serialxr_set_mctrl,
+ .get_mctrl = serialxr_get_mctrl,
+ .stop_tx = serialxr_stop_tx,
+ .start_tx = serialxr_start_tx,
+ .stop_rx = serialxr_stop_rx,
+ .enable_ms = serialxr_enable_ms,
+ .break_ctl = serialxr_break_ctl,
+ .startup = serialxr_startup,
+ .shutdown = serialxr_shutdown,
+ .set_termios = serialxr_set_termios,
+ .pm = serialxr_pm,
+ .type = serialxr_type,
+ .release_port = serialxr_release_port,
+ .request_port = serialxr_request_port,
+ .config_port = serialxr_config_port,
+ .ioctl = serialxr_ioctl,
+};
+
+static DEFINE_MUTEX(serial_mutex);
+
+static struct uart_xr_port serialxr_ports[NR_PORTS];
+
+#define SERIALXR_CONSOLE NULL
+
+static struct uart_driver xr_uart_driver = {
+ .owner = THIS_MODULE,
+ .driver_name = "xrserial",
+ .dev_name = "ttyS",
+ .major = XR_MAJOR,
+ .minor = XR_MINOR,
+ .nr = NR_PORTS,
+ .cons = SERIALXR_CONSOLE,
+};
+
+static struct uart_xr_port *serialxr_find_match_or_unused(struct uart_port
+ *port)
+{
+ int i;
+
+ /*
+ * First, find a port entry which matches.
+ */
+ for (i = 0; i < NR_PORTS; i++)
+ if (uart_match_port(&serialxr_ports[i].port, port))
+ return &serialxr_ports[i];
+
+ /*
+ * We didn't find a matching entry, so look for the first
+ * free entry. We look for one which hasn't been previously
+ * used (indicated by zero iobase).
+ */
+ for (i = 0; i < NR_PORTS; i++)
+ if (serialxr_ports[i].port.type == PORT_UNKNOWN &&
+ serialxr_ports[i].port.iobase == 0) {
+ port->line = i;
+ return &serialxr_ports[i];
+ }
+
+ /*
+ * That also failed. Last resort is to find any entry which
+ * doesn't have a real port associated with it.
+ */
+ for (i = 0; i < NR_PORTS; i++)
+ if (serialxr_ports[i].port.type == PORT_UNKNOWN)
+ return &serialxr_ports[i];
+
+ return NULL;
+}
+
+/*
+ * serialxr_register_port - register a serial port
+ * @port: serial port template
+ *
+ * Configure the serial port specified by the request. If the
+ * port exists and is in use, it is hung up and unregistered
+ * first.
+ *
+ * The port is then probed and if necessary the IRQ is autodetected
+ * If this fails an error is returned.
+ *
+ * On success the port is ready to use and the line number is returned.
+ */
+int serialxr_register_port(struct uart_port *port)
+{
+ struct uart_xr_port *uart;
+ int ret = -ENOSPC;
+
+ if (port->uartclk == 0)
+ return -EINVAL;
+
+ mutex_lock(&serial_mutex);
+ uart = serialxr_find_match_or_unused(port);
+ if (uart) {
+ uart->port.iobase = port->iobase;
+ uart->port.membase = port->membase;
+ uart->port.irq = port->irq;
+ uart->port.uartclk = port->uartclk;
+ uart->port.fifosize = port->fifosize;
+ uart->port.regshift = port->regshift;
+ uart->port.iotype = port->iotype;
+ uart->port.flags = port->flags | UPF_BOOT_AUTOCONF;
+ uart->port.mapbase = port->mapbase;
+ if (port->dev)
+ uart->port.dev = port->dev;
+
+ uart->port.line = port->line;
+ spin_lock_init(&uart->port.lock);
+
+ init_timer(&uart->timer);
+ uart->timer.function = serialxr_timeout;
+
+ /*
+ * ALPHA_KLUDGE_MCR needs to be killed.
+ */
+ uart->mcr_mask = ~ALPHA_KLUDGE_MCR;
+ uart->mcr_force = ALPHA_KLUDGE_MCR;
+
+ uart->port.ops = &serialxr_pops;
+
+ ret = uart_add_one_port(&xr_uart_driver, &uart->port);
+ if (ret == 0)
+ ret = uart->port.line;
+ }
+ mutex_unlock(&serial_mutex);
+
+ return ret;
+}
+
+/*
+ * Probe one serial board. Unfortunately, there is no rhyme nor reason
+ * to the arrangement of serial ports on a PCI card.
+ */
+static int
+init_one_xrpciserialcard(struct pci_dev *dev, const struct pci_device_id *ent)
+{
+ struct serial_private *priv;
+ struct pciserial_board *board;
+ struct pci_serial_quirk *quirk;
+ struct uart_port serial_port;
+ int rc, nr_ports, i;
+
+ if (ent->driver_data >= ARRAY_SIZE(xrpciserial_boards)) {
+ pr_info("pci_init_one: invalid driver_data: %ld\n",
+ ent->driver_data);
+ return -EINVAL;
+ }
+
+ board = &xrpciserial_boards[ent->driver_data];
+
+ rc = pci_enable_device(dev);
+ if (rc)
+ return rc;
+
+ nr_ports = board->num_ports;
+
+ /*
+ * Find an init and setup quirks.
+ */
+ quirk = find_quirk(dev);
+
+ /*
+ * Run the new-style initialization function.
+ * The initialization function returns:
+ * <0 - error
+ * 0 - use board->num_ports
+ * >0 - number of ports
+ */
+ if (quirk->init) {
+ rc = quirk->init(dev);
+ if (rc < 0)
+ goto disable;
+ if (rc)
+ nr_ports = rc;
+ }
+
+ priv = kmalloc(sizeof(struct serial_private) +
+ sizeof(unsigned int) * nr_ports, GFP_KERNEL);
+ if (!priv) {
+ rc = -ENOMEM;
+ goto deinit;
+ }
+
+ memset(priv, 0, sizeof(struct serial_private) +
+ sizeof(unsigned int) * nr_ports);
+
+ priv->dev = dev;
+ priv->quirk = quirk;
+
+ memset(&serial_port, 0, sizeof(struct uart_port));
+ serial_port.flags = UPF_SKIP_TEST | UPF_BOOT_AUTOCONF | UPF_SHARE_IRQ;
+ serial_port.uartclk = board->base_baud * 16;
+ serial_port.irq = dev->irq;
+ serial_port.dev = &dev->dev;
+ for (i = 0; i < nr_ports; i++) {
+ if (quirk->setup(priv, board, &serial_port, i))
+ break;
+
+ priv->line[i] = serialxr_register_port(&serial_port);
+ if (priv->line[i] < 0) {
+ pr_warn("Couldn't register serial port %s: %d\n",
+ pci_name(dev), priv->line[i]);
+ break;
+ }
+ }
+
+ priv->nr = i;
+
+ if (!IS_ERR(priv)) {
+ pci_set_drvdata(dev, priv);
+ return 0;
+ }
+
+deinit:
+ if (quirk->exit)
+ quirk->exit(dev);
+disable:
+ pci_disable_device(dev);
+ return rc;
+}
+
+/*
+ * serialxr_unregister_port - remove a serial port at runtime
+ * @line: serial line number
+ *
+ * Remove one serial port. This may not be called from interrupt
+ * context. We hand the port back to the our control.
+ */
+void serialxr_unregister_port(int line)
+{
+ struct uart_xr_port *uart = &serialxr_ports[line];
+
+ mutex_lock(&serial_mutex);
+ uart_remove_one_port(&xr_uart_driver, &uart->port);
+ uart->port.dev = NULL;
+ mutex_unlock(&serial_mutex);
+}
+
+void pciserial_remove_ports(struct serial_private *priv)
+{
+ struct pci_serial_quirk *quirk;
+ int i;
+
+ for (i = 0; i < priv->nr; i++)
+ serialxr_unregister_port(priv->line[i]);
+
+ for (i = 0; i < PCI_NUM_BAR_RESOURCES; i++) {
+ if (priv->remapped_bar[i])
+ iounmap(priv->remapped_bar[i]);
+ priv->remapped_bar[i] = NULL;
+ }
+
+ /*
+ * Find the exit quirks.
+ */
+ quirk = find_quirk(priv->dev);
+ if (quirk->exit)
+ quirk->exit(priv->dev);
+
+ kfree(priv);
+}
+
+static void remove_one_xrpciserialcard(struct pci_dev *dev)
+{
+ struct serial_private *priv = pci_get_drvdata(dev);
+
+ pci_set_drvdata(dev, NULL);
+
+ pciserial_remove_ports(priv);
+
+ pci_disable_device(dev);
+}
+
+static struct pci_device_id xrserial_pci_tbl[] = {
+ {0x13a8, 0x158,
+ PCI_ANY_ID, PCI_ANY_ID,
+ 0, 0, xr_8port},
+ {0x13a8, 0x154,
+ PCI_ANY_ID, PCI_ANY_ID,
+ 0, 0, xr_4port},
+ {0x13a8, 0x152,
+ PCI_ANY_ID, PCI_ANY_ID,
+ 0, 0, xr_2port},
+ {0,}
+};
+
+static struct pci_driver xrserial_pci_driver = {
+ .name = "xrserial",
+ .probe = init_one_xrpciserialcard,
+ .remove = remove_one_xrpciserialcard,
+ .id_table = xrserial_pci_tbl,
+};
+
+static int __init serialxr_init(void)
+{
+ int ret;
+
+ pr_info("Exar PCI 17c15x serial driver Revision: 4.8\n");
+
+ ret = uart_register_driver(&xr_uart_driver);
+ if (ret)
+ return ret;
+
+ ret = pci_register_driver(&xrserial_pci_driver);
+
+ if (ret < 0)
+ uart_unregister_driver(&xr_uart_driver);
+
+ return ret;
+}
+
+static void __exit serialxr_exit(void)
+{
+ pci_unregister_driver(&xrserial_pci_driver);
+ uart_unregister_driver(&xr_uart_driver);
+}
+
+module_init(serialxr_init);
+module_exit(serialxr_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("Exar PCI specific serial driver for XR17c15x- Rev: 4.8");
--
1.7.9.5

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/