[PATCH v3] MFD: driver for Atmel Microcontroller on iPaq h3xxx

From: Linus Walleij
Date: Thu Apr 03 2014 - 11:46:44 EST


This adds a driver for the Atmel Microcontroller found on the
iPAQ h3xxx series. This device handles some keys, the
touchscreen, and the battery monitoring.

This is a port of a driver from handhelds.org 2.6.21 kernel,
written by Alessandro Gardich based on Andrew Christians
original HAL-driver. It has been heavily cleaned and
converted to mfd-core by Dmitry Artamonow and rewritten
again for the v3.x series kernels by Linus Walleij,
bringing back some of the functionality lost from Andrew's
original driver.

Cc: Russell King <linux@xxxxxxxxxxxxxxxx>
Cc: Dmitry Eremin-Solenikov <dbaryshkov@xxxxxxxxx>
Acked-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
Signed-off-by: Alessandro Gardich <gremlin@xxxxxxxxxx>
Signed-off-by: Dmitry Artamonow <mad_soft@xxxxxxxx>
Signed-off-by: Linus Walleij <linus.walleij@xxxxxxxxxx>
---
ChangeLog v2->v3:
- Pass a NULL parameter as suspend() function instead of
passing a dummy implementation. The core won't call this
anyway.

Lee: if you're OK with this version please merge it for v3.16
after v3.15-rc1...
---
drivers/mfd/Kconfig | 10 +
drivers/mfd/Makefile | 1 +
drivers/mfd/ipaq-micro.c | 482 +++++++++++++++++++++++++++++++++++++++++
include/linux/mfd/ipaq-micro.h | 148 +++++++++++++
4 files changed, 641 insertions(+)
create mode 100644 drivers/mfd/ipaq-micro.c
create mode 100644 include/linux/mfd/ipaq-micro.h

diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
index 49bb445d846a..255807afc582 100644
--- a/drivers/mfd/Kconfig
+++ b/drivers/mfd/Kconfig
@@ -242,6 +242,16 @@ config MFD_INTEL_MSIC
Passage) chip. This chip embeds audio, battery, GPIO, etc.
devices used in Intel Medfield platforms.

+config MFD_IPAQ_MICRO
+ bool "Atmel Micro ASIC (iPAQ h3100/h3600/h3700) Support"
+ depends on SA1100_H3100 || SA1100_H3600
+ select MFD_CORE
+ help
+ Select this to get support for the Microcontroller found in
+ the Compaq iPAQ handheld computers. This is an Atmel
+ AT90LS8535 microcontroller flashed with a special iPAQ
+ firmware using the custom protocol implemented in this driver.
+
config MFD_JANZ_CMODIO
tristate "Janz CMOD-IO PCI MODULbus Carrier Board"
select MFD_CORE
diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile
index 5aea5ef0a62f..cf8081fcb3ac 100644
--- a/drivers/mfd/Makefile
+++ b/drivers/mfd/Makefile
@@ -166,3 +166,4 @@ obj-$(CONFIG_MFD_RETU) += retu-mfd.o
obj-$(CONFIG_MFD_AS3711) += as3711.o
obj-$(CONFIG_MFD_AS3722) += as3722.o
obj-$(CONFIG_MFD_STW481X) += stw481x.o
+obj-$(CONFIG_MFD_IPAQ_MICRO) += ipaq-micro.o
diff --git a/drivers/mfd/ipaq-micro.c b/drivers/mfd/ipaq-micro.c
new file mode 100644
index 000000000000..1763d6db346e
--- /dev/null
+++ b/drivers/mfd/ipaq-micro.c
@@ -0,0 +1,482 @@
+/*
+ * Compaq iPAQ h3xxx Atmel microcontroller companion support
+ *
+ * This is an Atmel AT90LS8535 with a special flashed-in firmware that
+ * implements the special protocol used by this driver.
+ *
+ * based on previous kernel 2.4 version by Andrew Christian
+ * Author : Alessandro Gardich <gremlin@xxxxxxxxxx>
+ * Author : Dmitry Artamonow <mad_soft@xxxxxxxx>
+ * Author : Linus Walleij <linus.walleij@xxxxxxxxxx>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/pm.h>
+#include <linux/delay.h>
+#include <linux/device.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+#include <linux/mfd/core.h>
+#include <linux/mfd/ipaq-micro.h>
+#include <linux/string.h>
+#include <linux/random.h>
+#include <linux/slab.h>
+#include <linux/list.h>
+
+#include <mach/hardware.h>
+
+static void ipaq_micro_trigger_tx(struct ipaq_micro *micro)
+{
+ struct ipaq_micro_txdev *tx = &micro->tx;
+ struct ipaq_micro_msg *msg = micro->msg;
+ int i, bp;
+ u8 checksum;
+ u32 val;
+
+ bp = 0;
+ tx->buf[bp++] = CHAR_SOF;
+
+ checksum = ((msg->id & 0x0f) << 4) | (msg->tx_len & 0x0f);
+ tx->buf[bp++] = checksum;
+
+ for (i = 0; i < msg->tx_len; i++) {
+ tx->buf[bp++] = msg->tx_data[i];
+ checksum += msg->tx_data[i];
+ }
+
+ tx->buf[bp++] = checksum;
+ tx->len = bp;
+ tx->index = 0;
+ print_hex_dump(KERN_DEBUG, "data: ", DUMP_PREFIX_OFFSET, 16, 1,
+ tx->buf, tx->len, true);
+
+ /* Enable interrupt */
+ val = readl(micro->base + UTCR3);
+ val |= UTCR3_TIE;
+ writel(val, micro->base + UTCR3);
+}
+
+int ipaq_micro_tx_msg(struct ipaq_micro *micro, struct ipaq_micro_msg *msg)
+{
+ unsigned long flags;
+
+ dev_dbg(micro->dev, "TX msg: %02x, %d bytes\n", msg->id, msg->tx_len);
+
+ spin_lock_irqsave(&micro->lock, flags);
+ if (micro->msg) {
+ list_add_tail(&msg->node, &micro->queue);
+ spin_unlock_irqrestore(&micro->lock, flags);
+ return 0;
+ }
+ micro->msg = msg;
+ ipaq_micro_trigger_tx(micro);
+ spin_unlock_irqrestore(&micro->lock, flags);
+ return 0;
+}
+EXPORT_SYMBOL(ipaq_micro_tx_msg);
+
+static void micro_rx_msg(struct ipaq_micro *micro, u8 id, int len, u8 *data)
+{
+ int i;
+
+ dev_dbg(micro->dev, "RX msg: %02x, %d bytes\n", id, len);
+
+ spin_lock(&micro->lock);
+ switch (id) {
+ case MSG_VERSION:
+ case MSG_EEPROM_READ:
+ case MSG_EEPROM_WRITE:
+ case MSG_BACKLIGHT:
+ case MSG_NOTIFY_LED:
+ case MSG_THERMAL_SENSOR:
+ case MSG_BATTERY:
+ /* Handle synchronous messages */
+ if (micro->msg && micro->msg->id == id) {
+ struct ipaq_micro_msg *msg = micro->msg;
+
+ memcpy(msg->rx_data, data, len);
+ msg->rx_len = len;
+ complete(&micro->msg->ack);
+ if (!list_empty(&micro->queue)) {
+ micro->msg = list_entry(micro->queue.next,
+ struct ipaq_micro_msg,
+ node);
+ list_del_init(&micro->msg->node);
+ ipaq_micro_trigger_tx(micro);
+ } else
+ micro->msg = NULL;
+ dev_dbg(micro->dev, "OK RX message 0x%02x\n", id);
+ } else {
+ dev_err(micro->dev,
+ "out of band RX message 0x%02x\n", id);
+ if(!micro->msg)
+ dev_info(micro->dev, "no message queued\n");
+ else
+ dev_info(micro->dev, "expected message %02x\n",
+ micro->msg->id);
+ }
+ break;
+ case MSG_KEYBOARD:
+ if (micro->key)
+ micro->key(micro->key_data, len, data);
+ else
+ dev_dbg(micro->dev, "key message ignored, no handle \n");
+ break;
+ case MSG_TOUCHSCREEN:
+ if (micro->ts)
+ micro->ts(micro->ts_data, len, data);
+ else
+ dev_dbg(micro->dev, "touchscreen message ignored, no handle \n");
+ break;
+ default:
+ dev_err(micro->dev,
+ "unknown msg %d [%d] ", id, len);
+ for (i = 0; i < len; ++i)
+ pr_cont("0x%02x ", data[i]);
+ pr_cont("\n");
+ }
+ spin_unlock(&micro->lock);
+}
+
+static void micro_process_char(struct ipaq_micro *micro, u8 ch)
+{
+ struct ipaq_micro_rxdev *rx = &micro->rx;
+
+ switch (rx->state) {
+ case STATE_SOF: /* Looking for SOF */
+ if (ch == CHAR_SOF)
+ rx->state = STATE_ID; /* Next byte is the id and len */
+ break;
+ case STATE_ID: /* Looking for id and len byte */
+ rx->id = (ch & 0xf0) >> 4 ;
+ rx->len = (ch & 0x0f);
+ rx->index = 0;
+ rx->chksum = ch;
+ rx->state = (rx->len > 0) ? STATE_DATA : STATE_CHKSUM;
+ break;
+ case STATE_DATA: /* Looking for 'len' data bytes */
+ rx->chksum += ch;
+ rx->buf[rx->index] = ch;
+ if (++rx->index == rx->len)
+ rx->state = STATE_CHKSUM;
+ break;
+ case STATE_CHKSUM: /* Looking for the checksum */
+ if (ch == rx->chksum)
+ micro_rx_msg(micro, rx->id, rx->len, rx->buf);
+ rx->state = STATE_SOF;
+ break;
+ }
+}
+
+static void micro_rx_chars(struct ipaq_micro *micro)
+{
+ u32 status, ch;
+
+ while ((status = readl(micro->base + UTSR1)) & UTSR1_RNE) {
+ ch = readl(micro->base + UTDR);
+ if (status & UTSR1_PRE)
+ dev_err(micro->dev, "rx: parity error\n");
+ else if (status & UTSR1_FRE)
+ dev_err(micro->dev, "rx: framing error\n");
+ else if (status & UTSR1_ROR)
+ dev_err(micro->dev, "rx: overrun error\n");
+ micro_process_char(micro, ch);
+ }
+}
+
+static void ipaq_micro_get_version(struct ipaq_micro *micro)
+{
+ struct ipaq_micro_msg msg = {
+ .id = MSG_VERSION,
+ };
+
+ ipaq_micro_tx_msg_sync(micro, &msg);
+ if (msg.rx_len == 4) {
+ memcpy(micro->version, msg.rx_data, 4);
+ micro->version[4] = '\0';
+ } else if (msg.rx_len == 9) {
+ memcpy(micro->version, msg.rx_data, 4);
+ micro->version[4] = '\0';
+ /* Bytes 4-7 are "pack", byte 8 is "boot type" */
+ } else {
+ dev_err(micro->dev,
+ "illegal version message %d bytes\n", msg.rx_len);
+ }
+}
+
+static void ipaq_micro_eeprom_read(struct ipaq_micro *micro,
+ u8 address, u8 len, u8 *data)
+{
+ struct ipaq_micro_msg msg = {
+ .id = MSG_EEPROM_READ,
+ };
+ u8 i;
+
+ for (i = 0; i < len; i++) {
+ msg.tx_data[0] = address + i;
+ msg.tx_data[1] = 1;
+ msg.tx_len = 2;
+ ipaq_micro_tx_msg_sync(micro, &msg);
+ memcpy(data + (i * 2), msg.rx_data, 2);
+ }
+}
+
+static char *ipaq_micro_str(u8 *wchar, u8 len)
+{
+ char retstr[256];
+ u8 i;
+
+ for (i = 0; i < len / 2; i++)
+ retstr[i] = wchar[i * 2];
+ return kstrdup(retstr, GFP_KERNEL);
+}
+
+static u16 ipaq_micro_to_u16(u8 *data)
+{
+ return data[1] << 8 | data[0];
+}
+
+static void ipaq_micro_eeprom_dump(struct ipaq_micro *micro)
+{
+ u8 dump[256];
+ char *str;
+
+ ipaq_micro_eeprom_read(micro, 0, 128, dump);
+ str = ipaq_micro_str(dump, 10);
+ if (str) {
+ dev_info(micro->dev, "HM version %s\n", str);
+ kfree(str);
+ }
+ str = ipaq_micro_str(dump+10, 40);
+ if (str) {
+ dev_info(micro->dev, "serial number: %s\n", str);
+ /* Feed the random pool with this */
+ add_device_randomness(str, strlen(str));
+ kfree(str);
+ }
+ str = ipaq_micro_str(dump+50, 20);
+ if (str) {
+ dev_info(micro->dev, "module ID: %s\n", str);
+ kfree(str);
+ }
+ str = ipaq_micro_str(dump+70, 10);
+ if (str) {
+ dev_info(micro->dev, "product revision: %s\n", str);
+ kfree(str);
+ }
+ dev_info(micro->dev, "product ID: %u\n", ipaq_micro_to_u16(dump+80));
+ dev_info(micro->dev, "frame rate: %u fps\n",
+ ipaq_micro_to_u16(dump+82));
+ dev_info(micro->dev, "page mode: %u\n", ipaq_micro_to_u16(dump+84));
+ dev_info(micro->dev, "country ID: %u\n", ipaq_micro_to_u16(dump+86));
+ dev_info(micro->dev, "color display: %s\n",
+ ipaq_micro_to_u16(dump+88) ? "yes" : "no");
+ dev_info(micro->dev, "ROM size: %u MiB\n", ipaq_micro_to_u16(dump+90));
+ dev_info(micro->dev, "RAM size: %u KiB\n", ipaq_micro_to_u16(dump+92));
+ dev_info(micro->dev, "screen: %u x %u\n",
+ ipaq_micro_to_u16(dump+94), ipaq_micro_to_u16(dump+96));
+ print_hex_dump(KERN_DEBUG, "eeprom: ", DUMP_PREFIX_OFFSET, 16, 1,
+ dump, 256, true);
+
+}
+
+static void micro_tx_chars(struct ipaq_micro *micro)
+{
+ struct ipaq_micro_txdev *tx = &micro->tx;
+ u32 val;
+
+ while ((tx->index < tx->len) &&
+ (readl(micro->base + UTSR1) & UTSR1_TNF)) {
+ writel(tx->buf[tx->index], micro->base + UTDR);
+ tx->index++;
+ }
+
+ /* Stop interrupts */
+ val = readl(micro->base + UTCR3);
+ val &= ~UTCR3_TIE;
+ writel(val, micro->base + UTCR3);
+}
+
+static void micro_reset_comm(struct ipaq_micro *micro)
+{
+ struct ipaq_micro_rxdev *rx = &micro->rx;
+ u32 val;
+
+ if (micro->msg)
+ complete(&micro->msg->ack);
+
+ /* Initialize Serial channel protocol frame */
+ rx->state = STATE_SOF; /* Reset the state machine */
+
+ /* Set up interrupts */
+ writel(0x01, micro->sdlc + 0x0); /* Select UART mode */
+
+ /* Clean up CR3 */
+ writel(0x0, micro->base + UTCR3);
+
+ /* Format: 8N1 */
+ writel(UTCR0_8BitData | UTCR0_1StpBit, micro->base + UTCR0);
+
+ /* Baud rate: 115200 */
+ writel(0x0, micro->base + UTCR1);
+ writel(0x1, micro->base + UTCR2);
+
+ /* Clear SR0 */
+ writel(0xff, micro->base + UTSR0);
+
+ /* Enable RX int, disable TX int */
+ writel(UTCR3_TXE | UTCR3_RXE | UTCR3_RIE, micro->base + UTCR3);
+ val = readl(micro->base + UTCR3);
+ val &= ~UTCR3_TIE;
+ writel(val, micro->base + UTCR3);
+}
+
+static irqreturn_t micro_serial_isr(int irq, void *dev_id)
+{
+ struct ipaq_micro *micro = dev_id;
+ struct ipaq_micro_txdev *tx = &micro->tx;
+ u32 status;
+
+ status = readl(micro->base + UTSR0);
+ do {
+ if (status & (UTSR0_RID | UTSR0_RFS)) {
+ if (status & UTSR0_RID)
+ /* Clear the Receiver IDLE bit */
+ writel(UTSR0_RID, micro->base + UTSR0);
+ micro_rx_chars(micro);
+ }
+
+ /* Clear break bits */
+ if (status & (UTSR0_RBB | UTSR0_REB))
+ writel(status & (UTSR0_RBB | UTSR0_REB),
+ micro->base + UTSR0);
+
+ if (status & UTSR0_TFS)
+ micro_tx_chars(micro);
+
+ status = readl(micro->base + UTSR0);
+
+ } while (((tx->index < tx->len) && (status & UTSR0_TFS)) ||
+ (status & (UTSR0_RFS | UTSR0_RID)));
+
+ return IRQ_HANDLED;
+}
+
+static struct mfd_cell micro_cells[] = {
+ { .name = "ipaq-micro-backlight", },
+ { .name = "ipaq-micro-battery", },
+ { .name = "ipaq-micro-keys", },
+ { .name = "ipaq-micro-ts", },
+ { .name = "ipaq-micro-leds", },
+};
+
+static int micro_resume(struct device *dev)
+{
+ struct ipaq_micro *micro = dev_get_drvdata(dev);
+
+ micro_reset_comm(micro);
+ mdelay(10);
+
+ return 0;
+}
+
+static int micro_probe(struct platform_device *pdev)
+{
+ struct ipaq_micro *micro;
+ struct resource *res;
+ int ret;
+ int irq;
+
+ micro = devm_kzalloc(&pdev->dev, sizeof(*micro), GFP_KERNEL);
+ if (!micro)
+ return -ENOMEM;
+
+ micro->dev = &pdev->dev;
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (!res)
+ return -EINVAL;
+
+ micro->base = devm_request_and_ioremap(&pdev->dev, res);
+ if (!micro->base)
+ return -ENOMEM;
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
+ if (!res)
+ return -EINVAL;
+
+ micro->sdlc = devm_request_and_ioremap(&pdev->dev, res);
+ if (!micro->sdlc)
+ return -ENOMEM;
+
+ micro_reset_comm(micro);
+
+ irq = platform_get_irq(pdev, 0);
+ if (!irq)
+ return -EINVAL;
+ ret = devm_request_irq(&pdev->dev, irq, micro_serial_isr,
+ IRQF_SHARED, "ipaq-micro",
+ micro);
+ if (ret) {
+ dev_err(&pdev->dev, "unable to grab serial port IRQ\n");
+ return ret;
+ } else
+ dev_info(&pdev->dev, "grabbed serial port IRQ\n");
+
+ spin_lock_init(&micro->lock);
+ INIT_LIST_HEAD(&micro->queue);
+ platform_set_drvdata(pdev, micro);
+
+ ret = mfd_add_devices(&pdev->dev, pdev->id, micro_cells,
+ ARRAY_SIZE(micro_cells), NULL, 0, NULL);
+ if (ret) {
+ dev_err(&pdev->dev, "error adding MFD cells");
+ return ret;
+ }
+
+ /* Check version */
+ ipaq_micro_get_version(micro);
+ dev_info(&pdev->dev, "Atmel micro ASIC version %s\n", micro->version);
+ ipaq_micro_eeprom_dump(micro);
+
+ return 0;
+}
+
+static int micro_remove(struct platform_device *pdev)
+{
+ struct ipaq_micro *micro = platform_get_drvdata(pdev);
+ u32 val;
+
+ mfd_remove_devices(&pdev->dev);
+
+ val = readl(micro->base + UTCR3);
+ val &= ~(UTCR3_RXE | UTCR3_RIE); /* disable receive interrupt */
+ val &= ~(UTCR3_TXE | UTCR3_TIE); /* disable transmit interrupt */
+ writel(val, micro->base + UTCR3);
+
+ return 0;
+}
+
+static const struct dev_pm_ops micro_dev_pm_ops = {
+ SET_SYSTEM_SLEEP_PM_OPS(NULL, micro_resume)
+};
+
+static struct platform_driver micro_device_driver = {
+ .driver = {
+ .name = "ipaq-h3xxx-micro",
+ .pm = &micro_dev_pm_ops,
+ },
+ .probe = micro_probe,
+ .remove = micro_remove,
+ /* .shutdown = micro_suspend, // FIXME */
+};
+module_platform_driver(micro_device_driver);
+
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("driver for iPAQ Atmel micro core and backlight");
diff --git a/include/linux/mfd/ipaq-micro.h b/include/linux/mfd/ipaq-micro.h
new file mode 100644
index 000000000000..5c4d29f6674f
--- /dev/null
+++ b/include/linux/mfd/ipaq-micro.h
@@ -0,0 +1,148 @@
+/*
+ * Header file for the compaq Micro MFD
+ */
+
+#ifndef _MFD_IPAQ_MICRO_H_
+#define _MFD_IPAQ_MICRO_H_
+
+#include <linux/spinlock.h>
+#include <linux/completion.h>
+#include <linux/list.h>
+
+#define TX_BUF_SIZE 32
+#define RX_BUF_SIZE 16
+#define CHAR_SOF 0x02
+
+/*
+ * These are the different messages that can be sent to the microcontroller
+ * to control various aspects.
+ */
+#define MSG_VERSION 0x0
+#define MSG_KEYBOARD 0x2
+#define MSG_TOUCHSCREEN 0x3
+#define MSG_EEPROM_READ 0x4
+#define MSG_EEPROM_WRITE 0x5
+#define MSG_THERMAL_SENSOR 0x6
+#define MSG_NOTIFY_LED 0x8
+#define MSG_BATTERY 0x9
+#define MSG_SPI_READ 0xb
+#define MSG_SPI_WRITE 0xc
+#define MSG_BACKLIGHT 0xd /* H3600 only */
+#define MSG_CODEC_CTRL 0xe /* H3100 only */
+#define MSG_DISPLAY_CTRL 0xf /* H3100 only */
+
+/* state of receiver parser */
+enum rx_state {
+ STATE_SOF = 0, /* Next byte should be start of frame */
+ STATE_ID, /* Next byte is ID & message length */
+ STATE_DATA, /* Next byte is a data byte */
+ STATE_CHKSUM /* Next byte should be checksum */
+};
+
+/**
+ * struct ipaq_micro_txdev - TX state
+ * @len: length of message in TX buffer
+ * @index: current index into TX buffer
+ * @buf: TX buffer
+ */
+struct ipaq_micro_txdev {
+ u8 len;
+ u8 index;
+ u8 buf[TX_BUF_SIZE];
+};
+
+/**
+ * struct ipaq_micro_rxdev - RX state
+ * @state: context of RX state machine
+ * @chksum: calculated checksum
+ * @id: message ID from packet
+ * @len: RX buffer length
+ * @index: RX buffer index
+ * @buf: RX buffer
+ */
+struct ipaq_micro_rxdev {
+ enum rx_state state;
+ unsigned char chksum;
+ u8 id;
+ unsigned int len;
+ unsigned int index;
+ u8 buf[RX_BUF_SIZE];
+};
+
+/**
+ * struct ipaq_micro_msg - message to the iPAQ microcontroller
+ * @id: 4-bit ID of the message
+ * @tx_len: length of TX data
+ * @tx_data: TX data to send
+ * @rx_len: length of receieved RX data
+ * @rx_data: RX data to recieve
+ * @ack: a completion that will be completed when RX is complete
+ * @node: list node if message gets queued
+ */
+struct ipaq_micro_msg {
+ u8 id;
+ u8 tx_len;
+ u8 tx_data[TX_BUF_SIZE];
+ u8 rx_len;
+ u8 rx_data[RX_BUF_SIZE];
+ struct completion ack;
+ struct list_head node;
+};
+
+/**
+ * struct ipaq_micro - iPAQ microcontroller state
+ * @dev: corresponding platform device
+ * @base: virtual memory base for underlying serial device
+ * @sdlc: virtual memory base for Synchronous Data Link Controller
+ * @version: version string
+ * @tx: TX state
+ * @rx: RX state
+ * @lock: lock for this state container
+ * @msg: current message
+ * @queue: message queue
+ * @key: callback for asynchronous key events
+ * @key_data: data to pass along with key events
+ * @ts: callback for asynchronous touchscreen events
+ * @ts_data: data to pass along with key events
+ */
+struct ipaq_micro {
+ struct device *dev;
+ void __iomem *base;
+ void __iomem *sdlc;
+ char version[5];
+ struct ipaq_micro_txdev tx; /* transmit ISR state */
+ struct ipaq_micro_rxdev rx; /* receive ISR state */
+ spinlock_t lock;
+ struct ipaq_micro_msg *msg;
+ struct list_head queue;
+ void (*key) (void *data, int len, unsigned char *rxdata);
+ void *key_data;
+ void (*ts) (void *data, int len, unsigned char *rxdata);
+ void *ts_data;
+};
+
+extern int
+ipaq_micro_tx_msg(struct ipaq_micro *micro, struct ipaq_micro_msg *msg);
+
+static inline int
+ipaq_micro_tx_msg_sync(struct ipaq_micro *micro,
+ struct ipaq_micro_msg *msg)
+{
+ int ret;
+
+ init_completion(&msg->ack);
+ ret = ipaq_micro_tx_msg(micro, msg);
+ wait_for_completion(&msg->ack);
+
+ return ret;
+}
+
+static inline int
+ipaq_micro_tx_msg_async(struct ipaq_micro *micro,
+ struct ipaq_micro_msg *msg)
+{
+ init_completion(&msg->ack);
+ return ipaq_micro_tx_msg(micro, msg);
+}
+
+#endif /* _MFD_IPAQ_MICRO_H_ */
--
1.9.0

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/