[PATCH 3/3] ACPI: Don't re-select SBS battery if it's already selected

[Matthew Garrett]

The existing SBS code explicitly sets the selected battery in the SBS
manager regardless of whether the battery in question is already selected.
This causes bus timeouts on Apple hardware. Check for this case and avoid
it.

Signed-off-by: Matthew Garrett <matthew.garrett@xxxxxxxxxx>
---
 drivers/acpi/sbs.c | 18 +++++++++++++-----
 1 file changed, 13 insertions(+), 5 deletions(-)

diff --git a/drivers/acpi/sbs.c b/drivers/acpi/sbs.c
index dbd4849..c386505 100644
--- a/drivers/acpi/sbs.c
+++ b/drivers/acpi/sbs.c
@@ -470,17 +470,25 @@ static struct device_attribute alarm_attr = {
 static int acpi_battery_read(struct acpi_battery *battery)
 {
 	int result = 0, saved_present = battery->present;
-	u16 state;
+	u16 state, selected, desired;
 
 	if (battery->sbs->manager_present) {
 		result = acpi_smbus_read(battery->sbs->hc, SMBUS_READ_WORD,
 				ACPI_SBS_MANAGER, 0x01, (u8 *)&state);
 		if (!result)
 			battery->present = state & (1 << battery->id);
-		state &= 0x0fff;
-		state |= 1 << (battery->id + 12);
-		acpi_smbus_write(battery->sbs->hc, SMBUS_WRITE_WORD,
-				  ACPI_SBS_MANAGER, 0x01, (u8 *)&state, 2);
+		/*
+		 * Don't switch battery if the correct one is already selected
+		 */
+		selected = state & 0xf000;
+		desired = 1 << (battery->id + 12);
+		if (selected != desired) {
+			state &= 0x0fff;
+			state |= desired;
+			acpi_smbus_write(battery->sbs->hc, SMBUS_WRITE_WORD,
+					 ACPI_SBS_MANAGER, 0x01,
+					 (u8 *)&state, 2);
+		}
 	} else if (battery->id == 0)
 		battery->present = 1;
 	if (result || !battery->present)
-- 
1.8.5.3

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/