[PATCH v3 0/3] dp83640: Get pin and master/slave configuration from DT

From: Stefan SÃrensen
Date: Thu Feb 13 2014 - 09:38:01 EST


This patch series add DT configuration to the DP83640 PHY driver and makes
the configuration of periodic output pins dynamic.

Changes since v2:
- Add patch to properly configure perout triggers 0+1
- Keep extts and perout numbers separate
- Shorten pr_err lines

Changes since v1:
- Add bindings documentation
- Keep module parameters
- Rename gpio->pin
- Split patch into DT part and dynamic periodic output support

Stefan SÃrensen (3):
net:phy:dp83640: Program pulsewidth2 values of perout triggers 0 and 1
net:phy:dp83640: Support a configurable number of periodic outputs
net:phy:dp83640: Get pin and master/slave configuration from DT

Documentation/devicetree/bindings/net/dp83640.txt | 29 ++++
drivers/net/phy/dp83640.c | 199 +++++++++++++++-------
2 files changed, 170 insertions(+), 58 deletions(-)
create mode 100644 Documentation/devicetree/bindings/net/dp83640.txt

--
1.8.5.3

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/