Re: [PATCH] backlight: add PWM dependencies

From: Jingoo Han
Date: Thu Feb 06 2014 - 01:49:46 EST


On Wednesday, February 05, 2014 5:58 PM, Linus Walleij wrote:
> On Wed, Feb 5, 2014 at 6:01 AM, Jingoo Han <jg1.han@xxxxxxxxxxx> wrote:
> > On Tuesday, February 04, 2014 9:57 PM, Linus Walleij wrote:
> >>
> >> In some compilations the LM3630A and LP855X backlight drivers
> >> fail like this:
> >>
> >> drivers/built-in.o: In function `lm3630a_pwm_ctrl':
> >> drivers/video/backlight/lm3630a_bl.c:168: undefined reference to `pwm_config'
> >> drivers/video/backlight/lm3630a_bl.c:172: undefined reference to `pwm_disable'
> >> drivers/video/backlight/lm3630a_bl.c:170: undefined reference to `pwm_enable'
> >> drivers/built-in.o: In function `lp855x_pwm_ctrl':
> >> drivers/video/backlight/lp855x_bl.c:249: undefined reference to `pwm_config'
> >> drivers/video/backlight/lp855x_bl.c:253: undefined reference to `pwm_disable'
> >> drivers/video/backlight/lp855x_bl.c:251: undefined reference to `pwm_enable'
> >>
> >> This is because both drivers depend on the PWM framework, so
> >> add this dependency to their Kconfig entries.
> >
> > However, even though, when CONFIG_PWM is not enabled, the problem
> > should not happen. pwm_config(),pwm_disable(), and pwm_enable()
> > are already defined for CONFIG_PWM=n case as below.
>
> So you may think but it does happen :-)
>
> I reproduced this with the defconfig for ARM pxa255-idp and enabling
> all boards for that platform, then enabling all available backlight drivers
> as compiled-in objects (y).

However, I cannot reproduce it with mainline kernel 3.14-rc1.

1. make pxa255-idp_defconfig
2. Enabling all boards
(System Type -> Intel PXA2xx/PXA3xx Implementations -> ...)
3. Enabling all available backlight drivers as compiled-in objects (y)

In this case, the LM3630A and LP855X backlight drivers are compiled
properly as below:

drivers/video/backlight/lm3630a_bl.o
drivers/video/backlight/lp855x_bl.o

Would you check it with mainline kernel 3.14-rc1?
If the errors happen, please attach the .config file.

Best regards,
Jingoo Han

>
> > ./include/linux/pwm.h
> > #if IS_ENABLED(CONFIG_PWM) || IS_ENABLED(CONFIG_HAVE_PWM)
> > .....
> > #else
>
> Hm PXA that I am using defines CONFIG_HAVE_PWM, but doesn't
> provide the required signatures (pwm_config/pwm_disable/pwm_enable).
>
> One of two things is wrong:
>
> - Either the PXA platform is breaking the CONFIG_HAVE_PWM
> contract by not providing pwm_config/pwm_disable/pwm_enable
> functions. Then HAVE_PWM should be removed from the PXA
> Kconfig selects.
>
> Or:
>
> - There is no such contract that these functions must exist if
> CONFIG_HAVE_PWM is defined, and the
> #if IS_ENABLED(CONFIG_HAVE_PWM)
> should be removed from <linux/pwm.h>
>
> Does anyone know which one it is?
>
> PWM subsystem maintainer? :-)
>
> Yours,
> Linus Walleij

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/