[PATCH 3.13 111/140] i2c: piix4: Add support for AMD ML and CZ SMBus changes

From: Greg Kroah-Hartman
Date: Tue Feb 04 2014 - 16:14:10 EST


3.13-stable review patch. If anyone has any objections, please let me know.

------------------

From: Shane Huang <shane.huang@xxxxxxx>

commit 032f708bc4f6da868ec49dac48ddf3670d8035d3 upstream.

The locations of SMBus register base address and enablement bit are changed
from AMD ML, which need this patch to be supported.

Signed-off-by: Shane Huang <shane.huang@xxxxxxx>
Reviewed-by: Jean Delvare <khali@xxxxxxxxxxxx>
Signed-off-by: Wolfram Sang <wsa@xxxxxxxxxxxxx>
Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>

---
Documentation/i2c/busses/i2c-piix4 | 2 +-
drivers/i2c/busses/Kconfig | 1 +
drivers/i2c/busses/i2c-piix4.c | 28 +++++++++++++++++++++++-----
3 files changed, 25 insertions(+), 6 deletions(-)

--- a/Documentation/i2c/busses/i2c-piix4
+++ b/Documentation/i2c/busses/i2c-piix4
@@ -13,7 +13,7 @@ Supported adapters:
* AMD SP5100 (SB700 derivative found on some server mainboards)
Datasheet: Publicly available at the AMD website
http://support.amd.com/us/Embedded_TechDocs/44413.pdf
- * AMD Hudson-2, CZ
+ * AMD Hudson-2, ML, CZ
Datasheet: Not publicly available
* Standard Microsystems (SMSC) SLC90E66 (Victory66) southbridge
Datasheet: Publicly available at the SMSC website http://www.smsc.com
--- a/drivers/i2c/busses/Kconfig
+++ b/drivers/i2c/busses/Kconfig
@@ -152,6 +152,7 @@ config I2C_PIIX4
ATI SB700/SP5100
ATI SB800
AMD Hudson-2
+ AMD ML
AMD CZ
Serverworks OSB4
Serverworks CSB5
--- a/drivers/i2c/busses/i2c-piix4.c
+++ b/drivers/i2c/busses/i2c-piix4.c
@@ -22,7 +22,7 @@
Intel PIIX4, 440MX
Serverworks OSB4, CSB5, CSB6, HT-1000, HT-1100
ATI IXP200, IXP300, IXP400, SB600, SB700/SP5100, SB800
- AMD Hudson-2, CZ
+ AMD Hudson-2, ML, CZ
SMSC Victory66

Note: we assume there can only be one device, with one or more
@@ -235,7 +235,8 @@ static int piix4_setup_sb800(struct pci_
{
unsigned short piix4_smba;
unsigned short smba_idx = 0xcd6;
- u8 smba_en_lo, smba_en_hi, i2ccfg, i2ccfg_offset = 0x10, smb_en;
+ u8 smba_en_lo, smba_en_hi, smb_en, smb_en_status;
+ u8 i2ccfg, i2ccfg_offset = 0x10;

/* SB800 and later SMBus does not support forcing address */
if (force || force_addr) {
@@ -245,7 +246,15 @@ static int piix4_setup_sb800(struct pci_
}

/* Determine the address of the SMBus areas */
- smb_en = (aux) ? 0x28 : 0x2c;
+ if ((PIIX4_dev->vendor == PCI_VENDOR_ID_AMD &&
+ PIIX4_dev->device == PCI_DEVICE_ID_AMD_HUDSON2_SMBUS &&
+ PIIX4_dev->revision >= 0x41) ||
+ (PIIX4_dev->vendor == PCI_VENDOR_ID_AMD &&
+ PIIX4_dev->device == 0x790b &&
+ PIIX4_dev->revision >= 0x49))
+ smb_en = 0x00;
+ else
+ smb_en = (aux) ? 0x28 : 0x2c;

if (!request_region(smba_idx, 2, "smba_idx")) {
dev_err(&PIIX4_dev->dev, "SMBus base address index region "
@@ -258,13 +267,22 @@ static int piix4_setup_sb800(struct pci_
smba_en_hi = inb_p(smba_idx + 1);
release_region(smba_idx, 2);

- if ((smba_en_lo & 1) == 0) {
+ if (!smb_en) {
+ smb_en_status = smba_en_lo & 0x10;
+ piix4_smba = smba_en_hi << 8;
+ if (aux)
+ piix4_smba |= 0x20;
+ } else {
+ smb_en_status = smba_en_lo & 0x01;
+ piix4_smba = ((smba_en_hi << 8) | smba_en_lo) & 0xffe0;
+ }
+
+ if (!smb_en_status) {
dev_err(&PIIX4_dev->dev,
"Host SMBus controller not enabled!\n");
return -ENODEV;
}

- piix4_smba = ((smba_en_hi << 8) | smba_en_lo) & 0xffe0;
if (acpi_check_region(piix4_smba, SMBIOSIZE, piix4_driver.name))
return -ENODEV;



--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/