[PATCH] regulator: core: Make regulator object reflect configured voltage

[Bjorn Andersson]

In the case when a regulator is initialized from DT with equal min and max
voltages the voltage is applied on initialization and future calls to
regulator_set_voltage fails. This behavious is different than if the regulator
is configured to be a span and therefor requires logic to handle this
difference in the consumer driver.

Eliminate this difference by populating the min_uV and max_uV of the newly
created regulator from the constraints so that calles to regulator_set_voltage
is considered no-ops and not a failure.

Signed-off-by: Bjorn Andersson <bjorn.andersson@xxxxxxxxxxxxxx>
---
 drivers/regulator/core.c |   10 ++++++++++
 1 file changed, 10 insertions(+)

diff --git a/drivers/regulator/core.c b/drivers/regulator/core.c
index d85f313..9c82d37 100644
--- a/drivers/regulator/core.c
+++ b/drivers/regulator/core.c
@@ -1209,6 +1209,16 @@ static struct regulator *create_regulator(struct regulator_dev *rdev,
 	    _regulator_is_enabled(rdev))
 		regulator->always_on = true;
 
+	/*
+	 * Make the regulator reflect the configured voltage selected in
+	 * machine_constraints_voltage()
+	 */
+	if (rdev->constraints->apply_uV &&
+	    rdev->constraints->min_uV == rdev->constraints->max_uV) {
+		regulator->min_uV = rdev->constraints->min_uV;
+		regulator->max_uV = rdev->constraints->min_uV;
+	}
+
 	mutex_unlock(&rdev->mutex);
 	return regulator;
 overflow_err:
-- 
1.7.9.5

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/