[PATCH v4 0/6] Add Broadcom Capri pinctrl driver

From: Sherman Yin
Date: Fri Dec 20 2013 - 21:15:22 EST


The following patches adds a pinctrl driver for Broadcom Capri (BCM281xx) SoCs.
The first patch, adding the void * to pinctrl_pin_desc, has been previously
discussed with LinusW. See this thread:

http://lists.infradead.org/pipermail/linux-arm-kernel/2013-April/165880.html
---
v4: - removed patch to add new properties to generic pinconfig (merged)
- Updated bias-pull-up property to accept R value in Ohms instead of an enum
- move PINCTRL_CAPRI to defconfig
- Use regmap MMIO
v3: Re-worked driver to be based on generic pinconfig, addressed review
comments and other supporting changes:
- moved config selection from Kconfig to defconfig
- added slew-rate, input enable, input disable properties for generic
pinconfig
- added a description for PINCTRL config
v2: Use hyphens instead of underscore in DT property names.

Sherman Yin (6):
pinctrl: Add void * to pinctrl_pin_desc
pinctrl: Adds slew-rate, input-enable/disable
pinctrl: Make PINCTRL selectable by defconfig/menuconfig
pinctrl: Add pinctrl binding for Broadcom Capri SoCs
ARM: pinctrl: Add Broadcom Capri pinctrl driver
pinctrl: Enable pinctrl for Broadcom Capri SoCs

.../bindings/pinctrl/brcm,capri-pinctrl.txt | 429 ++++++
.../bindings/pinctrl/pinctrl-bindings.txt | 3 +
arch/arm/boot/dts/bcm11351.dtsi | 4 +
arch/arm/configs/bcm_defconfig | 5 +
drivers/pinctrl/Kconfig | 13 +-
drivers/pinctrl/Makefile | 1 +
drivers/pinctrl/pinconf-generic.c | 4 +
drivers/pinctrl/pinctrl-capri.c | 1408 ++++++++++++++++++++
include/linux/pinctrl/pinconf-generic.h | 4 +
include/linux/pinctrl/pinctrl.h | 2 +
10 files changed, 1872 insertions(+), 1 deletion(-)
create mode 100644 Documentation/devicetree/bindings/pinctrl/brcm,capri-pinctrl.txt
create mode 100644 drivers/pinctrl/pinctrl-capri.c

--
1.7.9.5

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/