[PATCH] tty/serial: at91: document clock properties

From: Boris BREZILLON
Date: Tue Dec 17 2013 - 11:02:32 EST


Document the clock properties required by the at91 i2c bus driver.

Signed-off-by: Boris BREZILLON <b.brezillon@xxxxxxxxxxx>
---
.../devicetree/bindings/serial/atmel-usart.txt | 7 +++++++
1 file changed, 7 insertions(+)

diff --git a/Documentation/devicetree/bindings/serial/atmel-usart.txt b/Documentation/devicetree/bindings/serial/atmel-usart.txt
index 2191dcb..9c5d19a 100644
--- a/Documentation/devicetree/bindings/serial/atmel-usart.txt
+++ b/Documentation/devicetree/bindings/serial/atmel-usart.txt
@@ -6,6 +6,9 @@ Required properties:
additional mode or an USART new feature.
- reg: Should contain registers location and length
- interrupts: Should contain interrupt
+- clock-names: tuple listing input clock names.
+ Required elements: "usart"
+- clocks: phandles to input clocks.

Optional properties:
- atmel,use-dma-rx: use of PDC or DMA for receiving data
@@ -26,6 +29,8 @@ Example:
compatible = "atmel,at91sam9260-usart";
reg = <0xfff8c000 0x4000>;
interrupts = <7>;
+ clocks = <&usart0_clk>;
+ clock-names = "usart";
atmel,use-dma-rx;
atmel,use-dma-tx;
};
@@ -35,6 +40,8 @@ Example:
compatible = "atmel,at91sam9260-usart";
reg = <0xf001c000 0x100>;
interrupts = <12 4 5>;
+ clocks = <&usart0_clk>;
+ clock-names = "usart";
atmel,use-dma-rx;
atmel,use-dma-tx;
dmas = <&dma0 2 0x3>,
--
1.7.9.5

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/