[PATCH v4 0/9] USB Device Controller support for BCM281xx

From: Matt Porter
Date: Thu Dec 12 2013 - 06:21:28 EST


Changes since v3:
- Rebased on 3.13-rc3
- Move struct phy bus_width attribute back into struct phy_attrs
- Fix build issue on !GENERIC_PHY
- Update dwc2 binding to reflect optional phy properties
- Rename bcm-kona-phy.txt binding to bcm-phy.txt
- Reorder bcm kona phy includes and use bitops
- phy-names changed to "usb2-phy" to match updated s3c-hsotg
generic phy-ification series

Changes since v2:
- Rebased on 3.13-rc1
- Fix braces in phy_get_bus_width()/phy_set_bus_width()
- Drop generic phy conversion to use the same support from
the Exynos generic phy conversion series
- Modify dts support to match the "device" phy name required
in the v3 Exynos generic phy conversion
- Add s3c-hsotg phy_init/phy_exit support
- Fix typo on reg property in kona phy binding
- Replace phy driver reg struct with offset defines
- Move phy soft reset to phy driver init
- Fix dts node names to match ePAPR conventions

Changes since v1:
- Convert USB phy driver to generic phy subsystem
- Add phy bus width apis
- Drop dwc2 phy bus width DT property in favor of querying the
phy provider for bus width
- Add generic phy/clock properties to dwc2 DT binding
- Add generic phy subsystem support to s3c-hsotg with the
existing usb phy and pdata phy methods as a fallback
- Split bindings out to separate patches to match the latest
DT binding review guidelines

This series adds USB Device Controller support for the Broadcom
BCM281xx family of parts. BCM281xx contains a DWC2 OTG block and
s3c-hsotg is used to support UDC operation.

Part 1 adds phy bus width support to the generic phy subsystem

Parts 2-6 allows s3c-hsotg to build on non-Samsung platforms, supports
the dwc2 binding, adds phy_init/phy_exit support, and supports fetching
phy bus width using the generic phy layer.

Parts 7-8 add a generic phy binding and driver for the BCM Kona USB PHY.

Part 9 adds the DT nodes to enable UDC support on both BCM281xx boards
in the kernel.

This series depends on:
- "Update Kona drivers to use clocks" v4 series
https://lkml.org/lkml/2013/12/5/508
- "Add new Exynos USB 2.0 PHY driver" v4 series
https://lkml.org/lkml/2013/12/5/166

Matt Porter (9):
phy: add phy_get_bus_width()/phy_set_bus_width() calls
staging: dwc2: update DT binding to add generic clock/phy properties
usb: gadget: s3c-hsotg: enable build for other platforms
usb: gadget: s3c-hsotg: add snps,dwc2 compatible string
usb: gadget: s3c-hsotg: use generic phy_init()/phy_exit() support
usb: gadget: s3c-hsotg: get phy bus width from phy subsystem
phy: add Broadcom Kona USB2 PHY DT binding
phy: add Broadcom Kona USB2 PHY driver
ARM: dts: add usb udc support to bcm281xx

Documentation/devicetree/bindings/phy/bcm-phy.txt | 15 ++
Documentation/devicetree/bindings/staging/dwc2.txt | 12 ++
arch/arm/boot/dts/bcm11351-brt.dts | 6 +
arch/arm/boot/dts/bcm11351.dtsi | 18 +++
arch/arm/boot/dts/bcm28155-ap.dts | 8 ++
drivers/phy/Kconfig | 6 +
drivers/phy/Makefile | 1 +
drivers/phy/phy-bcm-kona-usb2.c | 158 +++++++++++++++++++++
drivers/usb/gadget/Kconfig | 7 +-
drivers/usb/gadget/s3c-hsotg.c | 22 ++-
drivers/usb/gadget/s3c-hsotg.h | 1 +
include/linux/phy/phy.h | 28 ++++
12 files changed, 275 insertions(+), 7 deletions(-)
create mode 100644 Documentation/devicetree/bindings/phy/bcm-phy.txt
create mode 100644 drivers/phy/phy-bcm-kona-usb2.c

--
1.8.4

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/