Re: [PATCH v9] gpio: add a driver for Synopsys DesignWare APB GPIO

From: Steffen Trumtrar
Date: Thu Dec 12 2013 - 04:09:02 EST


Hi Alan!

On Wed, Dec 11, 2013 at 02:15:25PM -0600, delicious quinoa wrote:
> On Fri, Dec 6, 2013 at 3:09 PM, Alan Tull <delicious.quinoa@xxxxxxxxx> wrote:
> > From: Alan Tull <atull@xxxxxxxxxx>
> >
> > Hi Linus,
> >
> > If you don't have any further comments, can you take this patch?
> >
> > Alan
>
> Basically, this is a driver that Jamie wrote and was upstreaming a few
> years ago. For some reason it never quite made it into the kernel. I
> picked it up, updated the interrupt support, posted it to the list and
> went through some reviews with it.
>
> This driver has been reviewed, I hope it can make it into the kernel.
>
> Alan
>

Sorry for chiming in late. I tested your driver on the Sockit and the GPIOs
work fine (basically just tested the 4 HPS LEDS that are on this board).

With the interrupt support I had a little trouble though:
The Sockit has an ADXL345 on the i2c bus with a gpio as interrupt line.

First: When you use "interrupt-parent", you have to specify the gpio node,
rather than the gpio-bank that has the interrupt-controller property. Is
that expected? I'm not really sure if that is normal behavior...

Second: The interrupt is registered as "GIC 37", which is a real interrupt on
the Socfpga. I would expect it to be marked as "GPIO 2xx" (or something in that
range). The interrupt from the gpiochip itself isn't registered at all ?!

Third: The interrupt didn't work. But that might also be my failure. I guess/hope
you tested interrupts successfully?!

(Fourth: small typo in the documentation example: "snps,nr-gpio" instead of "snps,nr-gpios")

Regards,
Steffen


--
Pengutronix e.K. | |
Industrial Linux Solutions | http://www.pengutronix.de/ |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/