[PATCH] hwmon: HIH-6130: Support I2C bus drivers without I2C_FUNC_SMBUS_QUICK

[Josà Miguel GonÃalves]

Some I2C bus drivers do not allow zero-length data transfers which are
required to start a measurement with the HIH6130/1 sensor. Nevertheless,
we can overcome this limitation by writing a zero dummy byte. This byte
is ignored by the sensor and was verified to be working with the OMAP
I2C bus driver in a BeagleBone board.

Signed-off-by: Josà Miguel GonÃalves <jose.goncalves@xxxxxxx>
---
v2: Use a field in struct hih6130 to store the measurement request's 
    write length when probing.

 drivers/hwmon/hih6130.c |   16 ++++++++++++++--
 1 file changed, 14 insertions(+), 2 deletions(-)

diff --git a/drivers/hwmon/hih6130.c b/drivers/hwmon/hih6130.c
index 2dc37c7..8e46265 100644
--- a/drivers/hwmon/hih6130.c
+++ b/drivers/hwmon/hih6130.c
@@ -43,6 +43,7 @@
  * @last_update: time of last update (jiffies)
  * @temperature: cached temperature measurement value
  * @humidity: cached humidity measurement value
+ * @write_length: length for I2C measurement request
  */
 struct hih6130 {
 	struct device *hwmon_dev;
@@ -51,6 +52,7 @@ struct hih6130 {
 	unsigned long last_update;
 	int temperature;
 	int humidity;
+	size_t write_length;
 };
 
 /**
@@ -121,8 +123,15 @@ static int hih6130_update_measurements(struct i2c_client *client)
 	 */
 	if (time_after(jiffies, hih6130->last_update + HZ) || !hih6130->valid) {
 
-		/* write to slave address, no data, to request a measurement */
-		ret = i2c_master_send(client, tmp, 0);
+		/*
+		 * Write to slave address to request a measurement.
+		 * According with the datasheet it should be with no data, but
+		 * for systems with I2C bus drivers that do not allow zero
+		 * length packets we write one dummy byte to allow sensor
+		 * measurements on them.
+		 */
+		tmp[0] = 0;
+		ret = i2c_master_send(client, tmp, hih6130->write_length);
 		if (ret < 0)
 			goto out;
 
@@ -252,6 +261,9 @@ static int hih6130_probe(struct i2c_client *client,
 		goto fail_remove_sysfs;
 	}
 
+	hih6130->write_length = (i2c_get_functionality(client->adapter) &
+				 I2C_FUNC_SMBUS_QUICK ? 0 : 1);
+
 	return 0;
 
 fail_remove_sysfs:
-- 
1.7.10.4

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/