Re: [PATCH v3 03/36] mtd: st_spi_fsm: Initialise and configure theFSM for normal working conditions

[Brian Norris]

Hi Lee,

On Fri, Nov 29, 2013 at 12:18:52PM +0000, Lee Jones wrote:
> --- a/drivers/mtd/devices/st_spi_fsm.c
> +++ b/drivers/mtd/devices/st_spi_fsm.c
> @@ -25,11 +25,121 @@
>  
>  #include "st_spi_fsm.h"
>  
> +static inline uint32_t stfsm_fifo_available(struct stfsm *fsm)
> +{
> +	return (readl(fsm->base + SPI_FAST_SEQ_STA) >> 5) & 0x7f;
> +}
> +
> +static void stfsm_clear_fifo(struct stfsm *fsm)
> +{
> +	uint32_t avail;
> +
> +	for (;;) {
> +		avail = stfsm_fifo_available(fsm);
> +		if (!avail)
> +			break;
> +
> +		while (avail) {
> +			readl(fsm->base + SPI_FAST_SEQ_DATA_REG);
> +			avail--;
> +		}
> +	}
> +}
> +
> +static int stfsm_set_mode(struct stfsm *fsm, uint32_t mode)
> +{
> +	int ret, timeout = 10;
> +
> +	/* Wait for controller to accept mode change */
> +	while(--timeout) {

s/while(/while (/

You should run your series through scripts/checkpatch.pl. There are a
number of small things to fixup in a few of your patches.

> +		ret = readl(fsm->base + SPI_STA_MODE_CHANGE);
> +		if (ret & 0x1)
> +			break;
> +		udelay(1);
> +	}
> +
> +	if (!timeout)
> +		return -EBUSY;
> +
> +	writel(mode, fsm->base + SPI_MODESELECT);
> +
> +	return 0;
> +}
> +
> +static void stfsm_set_freq(struct stfsm *fsm, uint32_t spi_freq)
> +{
> +	uint32_t emi_freq;
> +	uint32_t clk_div;
> +
> +	/* TODO: Make this dynamic */
> +	emi_freq = STFSM_DEFAULT_EMI_FREQ;
> +
> +	/*
> +	 * Calculate clk_div - values between 2 and 128
> +	 * Multiple of 2, rounded up
> +	 */
> +	clk_div = 2*((emi_freq + (2*spi_freq - 1))/(2*spi_freq));

I think this can use the <linux/kerne.h> round_up() macro. Also, you're
missing some spacing. Possibly:

	clk_div = 2 * round_up(emi_freq, 2 * spi_freq);

> +	if (clk_div < 2)
> +		clk_div = 2;
> +	else if (clk_div > 128)
> +		clk_div = 128;
> +
> +	/*
> +	 * Determine a suitable delay for the IP to complete a change of
> +	 * direction of the FIFO. The required delay is related to the clock
> +	 * divider used. The following heuristics are based on empirical tests,
> +	 * using a 100MHz EMI clock.
> +	 */
> +	if (clk_div <= 4)
> +		fsm->fifo_dir_delay = 0;
> +	else if (clk_div <= 10)
> +		fsm->fifo_dir_delay = 1;
> +	else
> +		fsm->fifo_dir_delay = (clk_div + 9) / 10;

round_down()?

> +
> +	dev_dbg(fsm->dev, "emi_clk = %uHZ, spi_freq = %uHZ, clk_div = %u\n",
> +		emi_freq, spi_freq, clk_div);
> +
> +	writel(clk_div, fsm->base + SPI_CLOCKDIV);
> +}

Brian
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/