[PATCH 00/03] pinctrl: sh-pfc: r7s72100 SCIF2 support

[Magnus Damm]

pinctrl: sh-pfc: r7s72100 SCIF2 support

[PATCH 01/03] pinctrl: sh-pfc: r7s72100 SCIF2 port3 support
[PATCH 02/03] pinctrl: sh-pfc: r7s72100 SCIF2 macro conversion
[PATCH 03/03] pinctrl: sh-pfc: r7s72100 SCIF2 port4, 6 and 8 support

Add PINCTL support for one channel of on-chip UART included in the r7s72100
SoC. This UART is called SCIF2 and happens to be the console port on the
Genmai board.

These patches are written in a broken out way to show how the r7s72100
hardware allows fine grained control of the pins, and proposes code that
 a) allows individual assignment of TxD and RxD signals.
 b) introduces macros to allow less verbose tables
 c) lists single-pin functions with one pin per line

Basically, just using "clk", "data" and "ctrl" to describe groups is not
fine grained enough for this SoC. For such fine grained on-chip devices
there will be single-pin groups, and in the case of the Genmai board the
groups to enable SCIF2 will be "scif2_txd_p3_0" and "scif2_rxd_p3_2".

If you prefer me to adjust this code somehow then please let me know.

Signed-off-by: Magnus Damm <damm@xxxxxxxxxxxxx>
---

 Written against renesas.git tag renesas-devel-v3.13-rc1-20131125 and
 [PATCH] pinctrl: sh-pfc: Initial r7s72100 support

 drivers/pinctrl/sh-pfc/pfc-r7s72100.c |  117 ++++++++++++++++++++++-----------
 1 file changed, 80 insertions(+), 37 deletions(-)
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/