[PATCH v3 5/6] watchdog: davinci: reuse driver for keystone arch

From: Ivan Khoronzhuk
Date: Mon Nov 25 2013 - 09:09:30 EST


The keystone arch uses the same IP watchdog, so add "ti,keystone-wdt"
compatible and correct identity.

The Keystone arch is using clocks in DT and source clock for watchdog
has to be specified, so add this to binding.

Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@xxxxxx>
Acked-by: Santosh Shilimkar <santosh.shilimkar@xxxxxx>
Reviewed-by: Guenter Roeck <linux@xxxxxxxxxxxx>
---
.../devicetree/bindings/watchdog/davinci-wdt.txt | 12 ++++++++++--
drivers/watchdog/Kconfig | 4 ++--
drivers/watchdog/davinci_wdt.c | 2 +-
3 files changed, 13 insertions(+), 5 deletions(-)

diff --git a/Documentation/devicetree/bindings/watchdog/davinci-wdt.txt b/Documentation/devicetree/bindings/watchdog/davinci-wdt.txt
index e450134..4d89317 100644
--- a/Documentation/devicetree/bindings/watchdog/davinci-wdt.txt
+++ b/Documentation/devicetree/bindings/watchdog/davinci-wdt.txt
@@ -1,11 +1,18 @@
-DaVinci Watchdog Timer (WDT) Controller
+Texas Instruments DaVinci/Keystone Watchdog Timer (WDT) Controller

Required properties:
-- compatible : Should be "ti,davinci-wdt"
+- compatible : Should be "ti,davinci-wdt" or "ti,keystone-wdt"
- reg : Should contain WDT registers location and length

Optional properties:
- timeout-sec : Contains the watchdog timeout in seconds
+- clocks : the clock feeding the watchdog timer.
+ Needed if platform uses clocks.
+ See clock-bindings.txt
+
+Documentation:
+Davinci DM646x - http://www.ti.com/lit/ug/spruer5b/spruer5b.pdf
+Keystone - http://www.ti.com/lit/ug/sprugv5a/sprugv5a.pdf

Examples:

@@ -13,4 +20,5 @@ wdt: wdt@2320000 {
compatible = "ti,davinci-wdt";
reg = <0x02320000 0x80>;
timeout-sec = <30>;
+ clocks = <&clkwdtimer0>;
};
diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig
index eb8c89d..01f3f81 100644
--- a/drivers/watchdog/Kconfig
+++ b/drivers/watchdog/Kconfig
@@ -270,12 +270,12 @@ config IOP_WATCHDOG

config DAVINCI_WATCHDOG
tristate "DaVinci watchdog"
- depends on ARCH_DAVINCI
+ depends on ARCH_DAVINCI || ARCH_KEYSTONE
select WATCHDOG_CORE
select WATCHDOG_NOWAYOUT
help
Say Y here if to include support for the watchdog timer
- in the DaVinci DM644x/DM646x processors.
+ in the DaVinci DM644x/DM646x or Keystone processors.
To compile this driver as a module, choose M here: the
module will be called davinci_wdt.

diff --git a/drivers/watchdog/davinci_wdt.c b/drivers/watchdog/davinci_wdt.c
index d342fc2..9128c74 100644
--- a/drivers/watchdog/davinci_wdt.c
+++ b/drivers/watchdog/davinci_wdt.c
@@ -143,7 +143,7 @@ static unsigned int davinci_wdt_get_timeleft(struct watchdog_device *wdd)

static const struct watchdog_info davinci_wdt_info = {
.options = WDIOF_KEEPALIVEPING,
- .identity = "DaVinci Watchdog",
+ .identity = "DaVinci/Keystone Watchdog",
};

static const struct watchdog_ops davinci_wdt_ops = {
--
1.7.9.5

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/