[PATCHv2 RESEND] irqchip: Add support for TI-NSPIRE irqchip

From: dt . tangr
Date: Sun Nov 24 2013 - 23:03:35 EST


From: Daniel Tang <dt.tangr@xxxxxxxxx>

This patch adds support for the interrupt controllers found in some
TI-Nspire models.

FIQ support was taken out to simplify the driver
code and may be added in later. Since Linux on this platform doesn't
really use FIQs, this wasn't really that important in the first
place.

Changes from v1 to v2:
* Converted to use generic IRQ chips.
* Removed FIQ for now to simplify driver code.
* Based against tip/irq/core and uses IRQ domain support for generic
chips.

Signed-off-by: Daniel Tang <dt.tangr@xxxxxxxxx>
Acked-by: Grant Likely <grant.likely@xxxxxxxxxxxx>
---
.../interrupt-controller/lsi,zevio-intc.txt | 18 +++
drivers/irqchip/Makefile | 1 +
drivers/irqchip/irq-zevio.c | 129 +++++++++++++++++++++
3 files changed, 148 insertions(+)
create mode 100644 Documentation/devicetree/bindings/interrupt-controller/lsi,zevio-intc.txt
create mode 100644 drivers/irqchip/irq-zevio.c

diff --git a/Documentation/devicetree/bindings/interrupt-controller/lsi,zevio-intc.txt b/Documentation/devicetree/bindings/interrupt-controller/lsi,zevio-intc.txt
new file mode 100644
index 0000000..aee38e7
--- /dev/null
+++ b/Documentation/devicetree/bindings/interrupt-controller/lsi,zevio-intc.txt
@@ -0,0 +1,18 @@
+TI-NSPIRE interrupt controller
+
+Required properties:
+- compatible: Compatible property value should be "lsi,zevio-intc".
+
+- reg: Physical base address of the controller and length of memory mapped
+ region.
+
+- interrupt-controller : Identifies the node as an interrupt controller
+
+Example:
+
+interrupt-controller {
+ compatible = "lsi,zevio-intc";
+ interrupt-controller;
+ reg = <0xDC000000 0x1000>;
+ #interrupt-cells = <1>;
+};
diff --git a/drivers/irqchip/Makefile b/drivers/irqchip/Makefile
index cda4cb5..f313d14 100644
--- a/drivers/irqchip/Makefile
+++ b/drivers/irqchip/Makefile
@@ -15,4 +15,5 @@ obj-$(CONFIG_SIRF_IRQ) += irq-sirfsoc.o
obj-$(CONFIG_RENESAS_INTC_IRQPIN) += irq-renesas-intc-irqpin.o
obj-$(CONFIG_RENESAS_IRQC) += irq-renesas-irqc.o
obj-$(CONFIG_VERSATILE_FPGA_IRQ) += irq-versatile-fpga.o
+obj-$(CONFIG_ARCH_NSPIRE) += irq-zevio.o
obj-$(CONFIG_ARCH_VT8500) += irq-vt8500.o
diff --git a/drivers/irqchip/irq-zevio.c b/drivers/irqchip/irq-zevio.c
new file mode 100644
index 0000000..92e6c7b
--- /dev/null
+++ b/drivers/irqchip/irq-zevio.c
@@ -0,0 +1,129 @@
+/*
+ * linux/drivers/irqchip/irq-zevio.c
+ *
+ * Copyright (C) 2013 Daniel Tang <tangrs@xxxxxxxxxxxx>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2, as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/io.h>
+#include <linux/irq.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
+
+#include <asm/mach/irq.h>
+#include <asm/exception.h>
+
+#include "irqchip.h"
+
+#define IO_STATUS 0x000
+#define IO_RAW_STATUS 0x004
+#define IO_ENABLE 0x008
+#define IO_DISABLE 0x00C
+#define IO_CURRENT 0x020
+#define IO_RESET 0x028
+#define IO_MAX_PRIOTY 0x02C
+
+#define IO_IRQ_BASE 0x000
+#define IO_FIQ_BASE 0x100
+
+#define IO_INVERT_SEL 0x200
+#define IO_STICKY_SEL 0x204
+#define IO_PRIORITY_SEL 0x300
+
+#define MAX_INTRS 32
+#define FIQ_START MAX_INTRS
+
+static struct irq_domain *zevio_irq_domain;
+static void __iomem *zevio_irq_io;
+
+static void zevio_irq_ack(struct irq_data *irqd)
+{
+ struct irq_chip_generic *gc = irq_data_get_irq_chip_data(irqd);
+ struct irq_chip_regs *regs =
+ &container_of(irqd->chip, struct irq_chip_type, chip)->regs;
+
+ irq_gc_lock(gc);
+ readl(gc->reg_base + regs->ack);
+ irq_gc_unlock(gc);
+}
+
+static void init_base(void __iomem *base)
+{
+ /* Disable all interrupts */
+ writel(~0, base + IO_DISABLE);
+
+ /* Accept interrupts of all priorities */
+ writel(0xF, base + IO_MAX_PRIOTY);
+
+ /* Reset existing interrupts */
+ readl(base + IO_RESET);
+}
+
+asmlinkage void __exception_irq_entry zevio_handle_irq(struct pt_regs *regs)
+{
+ int irqnr;
+
+ while (readl(zevio_irq_io + IO_STATUS)) {
+ irqnr = readl(zevio_irq_io + IO_CURRENT);
+ irqnr = irq_find_mapping(zevio_irq_domain, irqnr);
+ handle_IRQ(irqnr, regs);
+ };
+}
+
+static int __init zevio_of_init(struct device_node *node,
+ struct device_node *parent)
+{
+ unsigned int clr = IRQ_NOREQUEST | IRQ_NOPROBE | IRQ_NOAUTOEN;
+ struct irq_chip_generic *gc;
+ int ret;
+
+ if (WARN_ON(zevio_irq_io || zevio_irq_domain))
+ return -EBUSY;
+
+ zevio_irq_io = of_iomap(node, 0);
+ BUG_ON(!zevio_irq_io);
+
+ /* Do not invert interrupt status bits */
+ writel(~0, zevio_irq_io + IO_INVERT_SEL);
+
+ /* Disable sticky interrupts */
+ writel(0, zevio_irq_io + IO_STICKY_SEL);
+
+ /* We don't use IRQ priorities. Set each IRQ to highest priority. */
+ memset_io(zevio_irq_io + IO_PRIORITY_SEL, 0, MAX_INTRS * sizeof(u32));
+
+ /* Init IRQ and FIQ */
+ init_base(zevio_irq_io + IO_IRQ_BASE);
+ init_base(zevio_irq_io + IO_FIQ_BASE);
+
+ zevio_irq_domain = irq_domain_add_linear(node, MAX_INTRS,
+ &irq_generic_chip_ops, NULL);
+ BUG_ON(!zevio_irq_domain);
+
+ ret = irq_alloc_domain_generic_chips(zevio_irq_domain, MAX_INTRS, 1,
+ "zevio_intc", handle_level_irq,
+ clr, 0, IRQ_GC_INIT_MASK_CACHE);
+ BUG_ON(ret);
+
+ gc = irq_get_domain_generic_chip(zevio_irq_domain, 0);
+ gc->reg_base = zevio_irq_io;
+ gc->chip_types[0].chip.irq_ack = zevio_irq_ack;
+ gc->chip_types[0].chip.irq_mask = irq_gc_mask_disable_reg;
+ gc->chip_types[0].chip.irq_unmask = irq_gc_unmask_enable_reg;
+ gc->chip_types[0].regs.mask = IO_IRQ_BASE + IO_ENABLE;
+ gc->chip_types[0].regs.enable = IO_IRQ_BASE + IO_ENABLE;
+ gc->chip_types[0].regs.disable = IO_IRQ_BASE + IO_DISABLE;
+ gc->chip_types[0].regs.ack = IO_IRQ_BASE + IO_RESET;
+
+ set_handle_irq(zevio_handle_irq);
+
+ pr_info("TI-NSPIRE classic IRQ controller\n");
+ return 0;
+}
+
+IRQCHIP_DECLARE(zevio_irq, "lsi,zevio-intc", zevio_of_init);
--
1.8.1.3

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/