Re: [PATCH v2 9/9] ARM: dts: add usb udc support to bcm281xx

From: Matt Porter
Date: Fri Nov 01 2013 - 18:52:51 EST


On Fri, Nov 01, 2013 at 11:56:33PM +0300, Sergei Shtylyov wrote:
> Hello.
>
> On 11/01/2013 10:45 PM, Matt Porter wrote:
>
> >Adds USB OTG/PHY and clock support to BCM281xx and enables
> >UDC support on the bcm11351-brt and bcm28155-ap boards.
>
> >Signed-off-by: Matt Porter <matt.porter@xxxxxxxxxx>
> >Reviewed-by: Markus Mayer <markus.mayer@xxxxxxxxxx>
> >Reviewed-by: Tim Kryger <tim.kryger@xxxxxxxxxx>
> >---
> > arch/arm/boot/dts/bcm11351-brt.dts | 6 ++++++
> > arch/arm/boot/dts/bcm11351.dtsi | 18 ++++++++++++++++++
> > arch/arm/boot/dts/bcm28155-ap.dts | 8 ++++++++
> > 3 files changed, 32 insertions(+)
>
> [...]
> >diff --git a/arch/arm/boot/dts/bcm11351.dtsi b/arch/arm/boot/dts/bcm11351.dtsi
> >index 0755f43..247f9fd 100644
> >--- a/arch/arm/boot/dts/bcm11351.dtsi
> >+++ b/arch/arm/boot/dts/bcm11351.dtsi
> >@@ -284,4 +284,22 @@
> > #clock-cells = <0>;
> > };
> > };
> >+
> >+ usbotg: usbotg@3f120000 {
>
> According to ePAPR spec [1], the node name should be "usb@3f120000".

Will address in v3.

> >+ compatible = "snps,dwc2";
> >+ reg = <0x3f120000 0x10000>;
> >+ interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>;
> >+ clocks = <&usb_otg_ahb_clk>;
> >+ clock-names = "otg";
> >+ phys = <&usbphy>;
> >+ phy-names = "usb2-phy";
> >+ status = "disabled";
> >+ };
> >+
> >+ usbphy: usbphy@3f130000 {
>
> This one should probably be named "usb-phy@3f130000", just like
> "ethernet-phy" from the ePAPR spec.

Yes, agreed that will follow the same naming convention. I'll roll this
in v3. Thanks for the review.

-Matt

> >+ compatible = "brcm,kona-usb2-phy";
> >+ reg = <0x3f130000 0x28>;
> >+ #phy-cells = <0>;
> >+ status = "disabled";
> >+ };
> > };
>
> [1] http://www.power.org/resources/downloads/Power_ePAPR_APPROVED_v1.0.pdf
>
> WBR, Sergei
>
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/