[PATCH v2 0/9] USB Device Controller support for BCM281xx

From: Matt Porter
Date: Fri Nov 01 2013 - 15:46:19 EST


Changes since v1:
- Convert USB phy driver to generic phy subsystem
- Add phy bus width apis
- Drop dwc2 phy bus width DT property in favor of querying the
phy provider for bus width
- Add generic phy/clock properties to dwc2 DT binding
- Add generic phy subsystem support to s3c-hsotg with the
existing usb phy and pdata phy methods as a fallback
- Split bindings out to separate patches to match the latest
DT binding review guidelines

This series adds USB Device Controller support for the Broadcom
BCM281xx family of parts. BCM281xx contains a DWC2 OTG block and
s3c-hsotg is used to support UDC operation.

Part 1 adds phy bus width support to the generic phy subsystem

Parts 2-6 allows s3c-hsotg to build on non-Samsung platforms, supports
the dwc2 binding, and enables generic phy support to support fetching
of the phy bus width.

Part 7-8 add a generic phy binding and driver for the BCM Kona USB PHY.

Part 9 adds the DT nodes to enable UDC support on both BCM281xx boards
in the kernel.

This series depends on the "Update Kona drivers to use clocks" series
(https://lkml.org/lkml/2013/10/3/645). The dependencies noted for that
series are already queued for 3.13. It also depends on the generic PHY
subsystem which has also been queued for 3.13.

Matt Porter (9):
phy: add phy_get_bus_width()/phy_set_bus_width() calls
staging: dwc2: update DT binding to add generic clock/phy properties
usb: gadget: s3c-hsotg: enable build for other platforms
usb: gadget: s3c-hsotg: add snps,dwc2 compatible string
usb: gadget: s3c-hsotg: enable generic phy support
usb: gadget: s3c-hsotg: get phy bus width from phy subsystem
phy: add Broadcom Kona USB2 PHY DT binding
phy: add Broadcom Kona USB2 PHY driver
ARM: dts: add usb udc support to bcm281xx

.../devicetree/bindings/phy/bcm-kona-usb2-phy.txt | 15 ++
Documentation/devicetree/bindings/staging/dwc2.txt | 12 ++
arch/arm/boot/dts/bcm11351-brt.dts | 6 +
arch/arm/boot/dts/bcm11351.dtsi | 18 +++
arch/arm/boot/dts/bcm28155-ap.dts | 8 +
drivers/phy/Kconfig | 6 +
drivers/phy/Makefile | 2 +
drivers/phy/phy-bcm-kona-usb2.c | 161 +++++++++++++++++++++
drivers/usb/gadget/Kconfig | 7 +-
drivers/usb/gadget/s3c-hsotg.c | 71 ++++++---
drivers/usb/gadget/s3c-hsotg.h | 1 +
include/linux/phy/phy.h | 16 ++
12 files changed, 298 insertions(+), 25 deletions(-)
create mode 100644 Documentation/devicetree/bindings/phy/bcm-kona-usb2-phy.txt
create mode 100644 drivers/phy/phy-bcm-kona-usb2.c

--
1.8.4

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/