[PATCH 3/3] staging: drm/imx: ldb: correct the ldb di clock trees

From: Liu Ying
Date: Tue Aug 20 2013 - 04:55:17 EST


In ldb split mode, the ldb_di[0/1]_ipu_div dividers should
be configured as clock dividers of 1/3.5, while in others
ldb modes of 1/7. This patch gets the di[0/1]_div_3_5,
di[0/1]_div_7 and di[0/1]_div_sel clocks and sets the
di[0/1]_div_3_5 or di[0/1]_div_7 clocks to be the parents of
di[0/1]_div_sel clocks according to the ldb mode. The real
dividers are the two fixed factors bewteen the ldb_di[0/1] and
the pll clocks, so it's unnecessary to set the frequency for
the ldb_di[0/1] clocks again after pll clock frequency is set.
This patch removes the redundant clock frequency setting code
as well.

Signed-off-by: Liu Ying <Ying.Liu@xxxxxxxxxxxxx>
---
drivers/staging/imx-drm/imx-ldb.c | 38 +++++++++++++++++++++++++++++--------
1 file changed, 30 insertions(+), 8 deletions(-)

diff --git a/drivers/staging/imx-drm/imx-ldb.c b/drivers/staging/imx-drm/imx-ldb.c
index 8af7f3b..7c553b8 100644
--- a/drivers/staging/imx-drm/imx-ldb.c
+++ b/drivers/staging/imx-drm/imx-ldb.c
@@ -81,6 +81,9 @@ struct imx_ldb {
struct clk *clk[2]; /* our own clock */
struct clk *clk_sel[4]; /* parent of display clock */
struct clk *clk_pll[2]; /* upstream clock we can adjust */
+ struct clk *clk_div_3_5[2]; /* fixed factor of 1/3.5 */
+ struct clk *clk_div_7[2]; /* fixed factor of 1/7 */
+ struct clk *clk_div_sel[2]; /* 1/3.5 or 1/7 */
u32 ldb_ctrl;
const struct bus_mux *lvds_mux;
};
@@ -150,6 +153,18 @@ static void imx_ldb_set_clock(struct imx_ldb *ldb, int mux, int chno,
{
int ret;

+ if (ldb->ldb_ctrl & LDB_SPLIT_MODE_EN) {
+ ret = clk_set_parent(ldb->clk_div_sel[chno], ldb->clk_div_3_5[chno]);
+ if (ret)
+ dev_err(ldb->dev, "unable to set di%d_div_sel parent clock "
+ "to di%d_div_3_5\n", chno, chno);
+ } else {
+ ret = clk_set_parent(ldb->clk_div_sel[chno], ldb->clk_div_7[chno]);
+ if (ret)
+ dev_err(ldb->dev, "unable to set di%d_div_sel parent clock "
+ "to di%d_div_7\n", chno, chno);
+ }
+
dev_dbg(ldb->dev, "%s: now: %ld want: %ld\n", __func__,
clk_get_rate(ldb->clk_pll[chno]), serial_clk);
clk_set_rate(ldb->clk_pll[chno], serial_clk);
@@ -157,14 +172,6 @@ static void imx_ldb_set_clock(struct imx_ldb *ldb, int mux, int chno,
dev_dbg(ldb->dev, "%s after: %ld\n", __func__,
clk_get_rate(ldb->clk_pll[chno]));

- dev_dbg(ldb->dev, "%s: now: %ld want: %ld\n", __func__,
- clk_get_rate(ldb->clk[chno]),
- (long int)di_clk);
- clk_set_rate(ldb->clk[chno], di_clk);
-
- dev_dbg(ldb->dev, "%s after: %ld\n", __func__,
- clk_get_rate(ldb->clk[chno]));
-
/* set display clock mux to LDB input clock */
ret = clk_set_parent(ldb->clk_sel[mux], ldb->clk[chno]);
if (ret) {
@@ -362,6 +369,21 @@ static int imx_ldb_get_clk(struct imx_ldb *ldb, int chno)
if (IS_ERR(ldb->clk_pll[chno]))
return PTR_ERR(ldb->clk_pll[chno]);

+ sprintf(clkname, "di%d_div_3_5", chno);
+ ldb->clk_div_3_5[chno] = devm_clk_get(ldb->dev, clkname);
+ if (IS_ERR(ldb->clk_div_3_5[chno]))
+ return PTR_ERR(ldb->clk_div_3_5[chno]);
+
+ sprintf(clkname, "di%d_div_7", chno);
+ ldb->clk_div_7[chno] = devm_clk_get(ldb->dev, clkname);
+ if (IS_ERR(ldb->clk_div_7[chno]))
+ return PTR_ERR(ldb->clk_div_7[chno]);
+
+ sprintf(clkname, "di%d_div_sel", chno);
+ ldb->clk_div_sel[chno] = devm_clk_get(ldb->dev, clkname);
+ if (IS_ERR(ldb->clk_div_sel[chno]))
+ return PTR_ERR(ldb->clk_div_sel[chno]);
+
return 0;
}

--
1.7.9.5


--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/