Re: [lm-sensors] 3.10: NCT6776F sensor question with SupermicroX9SRL-F motherboard
From: Guenter Roeck
Date: Wed Jul 03 2013 - 16:56:57 EST
On Wed, Jul 03, 2013 at 01:21:06PM -0400, Justin Piszcz wrote:
>
>
> -----Original Message-----
> From: Guenter Roeck [mailto:linux@xxxxxxxxxxxx]
> Sent: Wednesday, July 03, 2013 1:17 PM
> To: Justin Piszcz
> Cc: linux-kernel@xxxxxxxxxxxxxxx; lm-sensors@xxxxxxxxxxxxxx
> Subject: Re: [lm-sensors] 3.10: NCT6776F sensor question with Supermicro
> X9SRL-F motherboard
>
> [ .. ]
>
> Can you try http://roeck-us.net/linux/bin/superiotool ?
>
> Sure, below:
>
> $ sudo ./superiotool
> superiotool r4.0-2514-gf419483
> Found Nuvoton WPCM450 (id=0x1a11, rev=0x00) at 0x164e
> Found Nuvoton NCT6776F (C) (id=0xc333) at 0x2e
> $ sudo ./superiotool -V -e
> Probing for Nuvoton Super I/O (sid=0xfc) at 0x164e...
> Found Nuvoton WPCM450 (id=0x1a11, rev=0x00) at 0x164e
> Probing for Nuvoton Super I/O at 0x2e...
> Found Nuvoton NCT6776F (C) (id=0xc333) at 0x2e
> Bank 0:
> 00 01 02 03 04 05 06 07 08 09 0a 0b 0c 0d 0e 0f
> 00: 03 33 03 33 00 ff ff ff ff ff ff ff ff ff ff ff
> 01: 04 ff 00 00 00 00 ff ff 00 00 00 00 00 83 00 00
> 02: 69 e6 ce ce bc 9e 84 2b ff ff ff ba 43 f9 cb e3
> 03: ba e3 ba ce a9 ac 8d a8 73 4b 46 ff ff ff ff ff
> 04: 03 fe 58 ff ff 80 3f ff 2d ff ff ff 10 05 00 a3
> 05: ff ff ff ff ff ff ff ff c1 ff ff ff ff 01 00 ff
> 06: 00 ff ff ff ff 01 07 ff ff ff ff ff ff ff ff ff
> 07: 00 0a 00 21 00 00 00 17 00 ff ff ff ff ff ff ff
> 08: ff 03 1f 0f ff 3c 3c 3c 00 00 00 00 00 00 00 00
> 09: 0a 00 00 00 00 0a 0a 0a 0a aa ef 80 ff 40 46 c4
> 0a: 0e 01 00 00 ff 00 00 ff 00 00 80 66 66 06 01 01
^^
This shows that PECI Agent 0 is supposed to be enabled.
> 0b: 00 00 00 00 02 01 35 00 1c 00 00 04 38 c0 c4 ff
> 0c: 01 00 00 00 00 00 00 00 00 07 02 ff ff ff ff ff
> 0d: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
> 0e: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
> 0f: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
> Bank 1:
> 00 01 02 03 04 05 06 07 08 09 0a 0b 0c 0d 0e 0f
> 00: 82 00 00 01 01 28 01 3c ff 33 ff ff 00 ff ff ff
> 01: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
> 02: 01 23 28 37 37 ff ff 28 51 ff ff ff ff ff ff ff
> 03: ff 00 ff ff 00 55 ff ff 05 01 00 00 00 00 00 00
> 04: ff ff ff ff ff d9 03 ff ff ff ff ff ff ff 01 ff
> 05: 00 00 00 5c 00 5f 00 ff ff ff ff ff ff ff ff ff
> 06: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
> 07: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
> 08: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
> 09: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
> 0a: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
> 0b: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
> 0c: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
> 0d: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
> 0e: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
> 0f: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
> Bank 2:
> 00 01 02 03 04 05 06 07 08 09 0a 0b 0c 0d 0e 0f
> 00: 8c 32 00 01 01 33 01 3c ff 33 ff ff 00 ff ff ff
^^
This value suggests that the second temperature sensor (the one creating
the alarm) is supposed to be the PECI source (which reports the CPU temperature
to the NCT6776), and that it is supposed to be used to control the speed
of the CPU fan.
^^
Fan control is in manual mode. Did you set this ?
It is quite unusual.
> 01: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
> 02: 01 32 5a 5a 5a ff ff 33 ff ff ff ff ff ff ff ff
> 03: ff 00 ff ff 00 5f ff ff 03 01 00 00 00 00 00 00
> 04: ff ff ff ff ff 2c 05 ff ff ff ff ff ff ff 02 ff
> 05: 21 00 00 5c 00 5f 00 ff ff ff ff ff ff ff ff ff
> 06: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
> 07: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
> 08: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
> 09: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
> 0a: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
> 0b: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
> 0c: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
> 0d: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
> 0e: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
> 0f: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
> Bank 3:
> 00 01 02 03 04 05 06 07 08 09 0a 0b 0c 0d 0e 0f
> 00: 03 00 00 0a 0a 01 01 3c ff ff ff ff 00 ff ff ff
> 01: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
> 02: 00 19 23 2d 37 ff ff 8c aa c8 e6 ff ff ff ff ff
> 03: ff 00 ff ff 00 3c ff ff 00 01 00 00 00 00 00 00
> 04: ff ff ff ff ff 48 04 ff ff ff ff ff ff ff 03 ff
> 05: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
> 06: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
> 07: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
> 08: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
> 09: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
> 0a: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
> 0b: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
> 0c: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
> 0d: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
> 0e: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
> 0f: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
> Bank 4:
> 00 01 02 03 04 05 06 07 08 09 0a 0b 0c 0d 0e 0f
> 00: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 01: 00 00 00 00 00 00 00 00 00 00 00 ff ff ff ff ff
> 02: ff ff ff 96 64 96 64 e1 96 ff ff ff ff ff ff ff
> 03: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
> 04: 3f 00 03 ff ff ff ff ff ff ff ff ff ff ff 04 ff
> 05: 31 13 ff ff 00 00 00 ff 00 20 12 00 09 ff ff ff
> 06: ff 01 00 00 00 00 00 00 ff ff ff ff ff ff ff ff
> 07: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
> 08: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
> 09: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
> 0a: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
> 0b: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
> 0c: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
> 0d: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
> 0e: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
> 0f: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
> Bank 5:
> 00 01 02 03 04 05 06 07 08 09 0a 0b 0c 0d 0e 0f
> 00: ff ff 00 00 00 00 ff ff ff ff ff ff ff 00 00 ff
> 01: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
> 02: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
> 03: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
> 04: ff ff ff ff ff ff ff ff ff ff ff ff ff ff 05 ff
> 05: df d9 c0 ff e3 ba e3 a9 ff ff ff ff ff ff ff ff
> 06: 00 00 00 00 00 00 07 01 01 ff ff ff ff ff ff ff
> 07: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
> 08: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
> 09: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
> 0a: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
> 0b: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
> 0c: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
> 0d: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
> 0e: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
> 0f: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
> Bank 6:
> 00 01 02 03 04 05 06 07 08 09 0a 0b 0c 0d 0e 0f
> 00: 00 00 ff ff ff ff ff ff ff ff ff ff ff ff ff ff
> 01: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
> 02: ff 01 0c 02 03 01 01 ff 00 00 00 17 2b 2b 00 ff
> 03: 2a 1a 1f 1c 26 0f 26 1f 2a 04 3c 06 3c 06 3c 06
> 04: 3c 06 3c 06 02 02 02 ff ff ff ff ff ff ff 06 ff
> 05: 7f 7f 7f 7f 7f 7f 03 d9 05 2b 04 48 04 3a 03 e9
> 06: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
> 07: 7f 7f 50 4b 04 7f 7f 50 4b 04 7f 7f 50 4b 04 ff
> 08: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
> 09: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
> 0a: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
> 0b: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
> 0c: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
> 0d: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
> 0e: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
> 0f: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
> Bank 7:
> 00 01 02 03 04 05 06 07 08 09 0a 0b 0c 0d 0e 0f
> 00: ff 95 02 10 00 00 00 00 00 64 00 00 00 00 00 00
> 01: 00 00 00 00 00 00 00 f8 80 f8 80 f8 80 f8 80 00
^^
00 here shows that the PECI source is not active, ie the CPU does not deliver
PECI data to the NCT6776. This explains the alarm.
Practical impact is probably limited as fan control is configured to be manual
anyway, but I wonder why PECI doesn't work on your board. PECI configuration
is identical to my Supermicro board.
Guenter
> 02: 28 00 06 00 00 09 00 00 00 ef 00 00 00 00 00 00
> 03: 00 00 00 ff ff ff ff ff ff ff ff ff ff ff ff ff
> 04: ff ff ff ff ff ff ff ff ff ff ff ff ff ff 07 ff
> 05: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
> 06: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
> 07: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
> 08: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
> 09: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
> 0a: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
> 0b: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
> 0c: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
> 0d: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
> 0e: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
> 0f: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
> Probing for Nuvoton Super I/O at 0x4e...
> Failed. Returned data: chip_id=0xffff
> Probing for Nuvoton Super I/O (sid=0xfc) at 0x4e...
>
>
> > [ .. ]
> >
> > You have to specify the raw attribute names, not the symbolic ones.
> > You see the raw attribute names with "sensors -u".
> >
> It has to be
> ignore temp8
> ignore temp9
> ignore temp10
>
> Woohoo! Thank you.
>
> nct6776-isa-0a30
> Adapter: ISA adapter
> Vcore: +0.83 V (min = +0.54 V, max = +1.49 V)
> in1: +1.85 V (min = +1.62 V, max = +1.99 V)
> AVCC: +3.30 V (min = +2.98 V, max = +3.63 V)
> +3.3V: +3.28 V (min = +2.98 V, max = +3.63 V)
> in4: +1.50 V (min = +1.35 V, max = +1.65 V)
> in5: +1.26 V (min = +1.13 V, max = +1.38 V)
> in6: +1.06 V (min = +0.92 V, max = +1.34 V)
> 3VSB: +3.57 V (min = +2.98 V, max = +3.63 V)
> Vbat: +3.47 V (min = +2.70 V, max = +3.63 V)
> fan1: 1010 RPM (min = 700 RPM)
> fan2: 1324 RPM (min = 700 RPM)
> fan3: 1102 RPM (min = 700 RPM)
> fan4: 1062 RPM (min = 700 RPM)
> fan5: 991 RPM (min = 700 RPM)
> SYSTIN: +43.0 C (high = +75.0 C, hyst = +70.0 C) sensor = thermistor
> CPUTIN: +33.0 C (high = +95.0 C, hyst = +92.0 C) ALARM sensor =
> thermistor
> AUXTIN: +23.0 C (high = +80.0 C, hyst = +75.0 C) sensor = thermistor
>
> Justin.
>
>
>
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/