Re: [PATCH v2 3/3] PCI/AER: Provide reset_link for firmware firstroot port

From: Chen Gong
Date: Tue Jun 04 2013 - 04:44:11 EST


On Thu, May 30, 2013 at 08:39:29AM -0600, Betty Dall wrote:
> Date: Thu, 30 May 2013 08:39:29 -0600
> From: Betty Dall <betty.dall@xxxxxx>
> To: rjw@xxxxxxx, bhelgaas@xxxxxxxxxx
> Cc: ying.huang@xxxxxxxxx, linux-acpi@xxxxxxxxxxxxxxx,
> linux-kernel@xxxxxxxxxxxxxxx, linux-pci@xxxxxxxxxxxxxxx, Betty Dall
> <betty.dall@xxxxxx>
> Subject: [PATCH v2 3/3] PCI/AER: Provide reset_link for firmware first root
> port
> X-Mailer: git-send-email 1.7.7.6
>
> The firmware first path does not install the aerdrv root port
> service driver, so the firmware first root port does not have
> a reset_link callback. When a firmware first root port does not have
> a reset_link callback, use a new default reset_link similar to what
> we already do for the default_downstream_reset_link(). The firmware
> first default reset_link brings the root port out of SBR if firmware
> left it in SBR.
>
> Changes since v1:
> Removed incorrect setting of p2p_ctrl after the read.
>
> Signed-off-by: Betty Dall <betty.dall@xxxxxx>
> ---
>
> drivers/pci/pcie/aer/aerdrv_core.c | 36 ++++++++++++++++++++++++++++++++++++
> 1 files changed, 36 insertions(+), 0 deletions(-)
>
>
> diff --git a/drivers/pci/pcie/aer/aerdrv_core.c b/drivers/pci/pcie/aer/aerdrv_core.c
> index 8ec8b4f..72f76cd 100644
> --- a/drivers/pci/pcie/aer/aerdrv_core.c
> +++ b/drivers/pci/pcie/aer/aerdrv_core.c
> @@ -413,6 +413,39 @@ static pci_ers_result_t default_downstream_reset_link(struct pci_dev *dev)
> return PCI_ERS_RESULT_RECOVERED;
> }
>
> +/**
> + * default_ff_root_port_reset_link - default reset function for firmware
> + * first Root Port
> + * @dev: pointer to root port's pci_dev data structure
> + *
> + * Invoked when performing link reset at Root Port w/ no aer driver.
> + * This happens through the firmware first path. Firmware may leave
> + * the Root Port in SBR and it is the OS responsiblity to bring it out
> + * of SBR.
> + */
> +static pci_ers_result_t default_ff_root_port_reset_link(struct pci_dev *dev)
> +{
> + u16 p2p_ctrl;
> +
> + /* Read Secondary Bus Reset */
> + pci_read_config_word(dev, PCI_BRIDGE_CONTROL, &p2p_ctrl);
> +
> + /* De-assert Secondary Bus Reset, if it is set */
> + if (p2p_ctrl & PCI_BRIDGE_CTL_BUS_RESET) {
> + p2p_ctrl &= ~PCI_BRIDGE_CTL_BUS_RESET;
> + pci_write_config_word(dev, PCI_BRIDGE_CONTROL, p2p_ctrl);
> +
> + /*
> + * System software must wait for at least 100ms from the end
> + * of a reset of one or more device before it is permitted
> + * to issue Configuration Requests to those devices.
> + */
> + msleep(200);
> + dev_dbg(&dev->dev, "Root Port link has been reset\n");
> + }
> + return PCI_ERS_RESULT_RECOVERED;
> +}

I don't think this function is OK.
1) You don't really reset the 2nd Bus but just checking its status.
I think you should have following steps to reset 2nd Bus:

a. Assert 2nd Bus Reset
b. wait for some time until this message has been broadcasted well
c. De-assert 2nd Bus Reset
d. wait for Trst time

IOW, since we have aer_do_secondary_bus_reset to perform secondary bus
reset, why you repeat it again?

2) msleep(200) is too long for kernel. You'd better yield the CPU when
sleep.

> +
> static int find_aer_service_iter(struct device *device, void *data)
> {
> struct pcie_port_service_driver *service_driver, **drv;
> @@ -460,6 +493,9 @@ static pci_ers_result_t reset_link(struct pci_dev *dev)
> status = driver->reset_link(udev);
> } else if (pci_pcie_type(udev) == PCI_EXP_TYPE_DOWNSTREAM) {
> status = default_downstream_reset_link(udev);
> + } else if (pci_pcie_type(udev) == PCI_EXP_TYPE_ROOT_PORT &&
> + pcie_aer_get_firmware_first(udev)) {
> + status = default_ff_root_port_reset_link(udev);
> } else {
> dev_printk(KERN_DEBUG, &dev->dev,
> "no link-reset support at upstream device %s\n",
> --
> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> the body of a message to majordomo@xxxxxxxxxxxxxxx
> More majordomo info at http://vger.kernel.org/majordomo-info.html
> Please read the FAQ at http://www.tux.org/lkml/

Attachment: signature.asc
Description: Digital signature