Re: [PATCH] PCI: move down pci_fixup_final for hotplug path

From: Bjorn Helgaas
Date: Tue May 07 2013 - 17:39:18 EST


On Tue, May 7, 2013 at 2:32 PM, Bjorn Helgaas <bhelgaas@xxxxxxxxxx> wrote:
> On Thu, Apr 25, 2013 at 06:47:07PM -0700, Yinghai Lu wrote:
>> David found some resource conflict issue after
>> | PCI: Put pci_dev in device tree as early as possible
>> | commit 4f535093cf8f6da8cfda7c36c2c1ecd2e9586ee4
>>
>> and
>> | USB: Fix handoff when BIOS disables host PCI device
>> | commit: cab928ee1f221c9cc48d6615070fefe2e444384a
>>
>> for usb qirks for hotplug path.
>>
>> After checking pci_fixup_device() with pci_fixup_final,
>> now we have different path for boot path and hotadd path.
>>
>> Boot path: because pci_apply_fix_final_quirks is not set yet,
>> so pci_fixup_device(pci_fixup_final) will be skipped
>> from pci_device_add().
>> And later pci_apply_final_quirks will be called for all
>> pci devices via fs_initcall.
>> That is after pci_assign_unassign resource.
>> In that case quirk could use bars with problem.
>>
>> Hotadd path: pci_fixup_device(pci_fixup_final) will be executed
>> via pci_device_add(), and that is too early for hotplug
>> path, as pci bar for hot add devices is not assigned yet
>> after commit 4f535093.
>>
>> So we need to move down that for hotplug path, call that in
>> pci_bus_add_devices instead, as at that time just before
>> drivers get attached.
>> And that is simliar calling place for pci_device_add before
>> commit 4f535093 is applied.
>>
>> We should apply this fix for v3.9, but is too late now.
>> so get it into v3.10 and could get into v3.9 stable instead.
>>
>> Reported-by: David Bulkow <David.Bulkow@xxxxxxxxxxx>
>> Tested-by: David Bulkow <David.Bulkow@xxxxxxxxxxx>
>> Signed-off-by: Yinghai Lu <yinghai@xxxxxxxxxx>
>
> I applied the following slightly tweaked patch to for-linus and will
> ask Linus to pull it for v3.10. Let me know if it looks OK.
>
> Bjorn
>
> commit a939563f3fd9cd6226c7fb7135d0b93507c53888
> Author: Bjorn Helgaas <bhelgaas@xxxxxxxxxx>

(I did already fix the Author: to be Yinghai, sorry about that)

> Date: Tue May 7 14:35:44 2013 -0600
>
> PCI: Delay final fixups until resources are assigned
>
> Commit 4f535093cf "PCI: Put pci_dev in device tree as early as possible"
> moved final fixups from pci_bus_add_device() to pci_device_add(). But
> pci_device_add() happens before resource assignment, so BARs may not be
> valid yet.
>
> Typical flow for hot-add:
>
> pciehp_configure_device
> pci_scan_slot
> pci_scan_single_device
> pci_device_add
> pci_fixup_device(pci_fixup_final, dev) # previous location
> # resource assignment happens here
> pci_bus_add_devices
> pci_bus_add_device
> pci_fixup_device(pci_fixup_final, dev) # new location
>
> [bhelgaas: changelog, move fixups to pci_bus_add_device()]
> Reference: https://lkml.kernel.org/r/20130415182614.GB9224@xanatos
> Reported-by: David Bulkow <David.Bulkow@xxxxxxxxxxx>
> Tested-by: David Bulkow <David.Bulkow@xxxxxxxxxxx>
> Signed-off-by: Yinghai Lu <yinghai@xxxxxxxxxx>
> Signed-off-by: Bjorn Helgaas <bhelgaas@xxxxxxxxxx>
> CC: stable@xxxxxxxxxxxxxxx # v3.9+
>
> diff --git a/drivers/pci/bus.c b/drivers/pci/bus.c
> index 748f8f3..32e66a6 100644
> --- a/drivers/pci/bus.c
> +++ b/drivers/pci/bus.c
> @@ -174,6 +174,7 @@ int pci_bus_add_device(struct pci_dev *dev)
> * Can not put in pci_device_add yet because resources
> * are not assigned yet for some devices.
> */
> + pci_fixup_device(pci_fixup_final, dev);
> pci_create_sysfs_dev_files(dev);
>
> dev->match_driver = true;
> diff --git a/drivers/pci/probe.c b/drivers/pci/probe.c
> index 43ece5d..67cd045 100644
> --- a/drivers/pci/probe.c
> +++ b/drivers/pci/probe.c
> @@ -1341,7 +1341,6 @@ void pci_device_add(struct pci_dev *dev, struct pci_bus *bus)
> list_add_tail(&dev->bus_list, &bus->devices);
> up_write(&pci_bus_sem);
>
> - pci_fixup_device(pci_fixup_final, dev);
> ret = pcibios_add_device(dev);
> WARN_ON(ret < 0);
>
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/