[PATCH V3 18/21] thermal: exynos: Add support for exynos5440 TMU sensor.

From: Amit Daniel Kachhap
Date: Tue May 07 2013 - 09:03:12 EST


This patch modifies TMU controller to add changes needed to work with
exynos5440 platform. Also register definitions and required configuration data
are added. This sensor registers 3 instance of the tmu controller with the
thermal zone and hence reports 3 temperature output. This controller supports
upto five trip points. For critical threshold the driver uses the core driver
thermal framework for shutdown.

Acked-by: Kukjin Kim <kgene.kim@xxxxxxxxxxx>
Signed-off-by: Amit Daniel Kachhap <amit.daniel@xxxxxxxxxxx>
---
.../devicetree/bindings/thermal/exynos-thermal.txt | 28 ++++-
drivers/thermal/samsung/Kconfig | 4 +-
drivers/thermal/samsung/exynos_thermal_common.c | 2 +-
drivers/thermal/samsung/exynos_tmu.c | 139 +++++++++++++++++---
drivers/thermal/samsung/exynos_tmu.h | 7 +
drivers/thermal/samsung/exynos_tmu_data.c | 66 +++++++++-
drivers/thermal/samsung/exynos_tmu_data.h | 40 ++++++
7 files changed, 261 insertions(+), 25 deletions(-)

diff --git a/Documentation/devicetree/bindings/thermal/exynos-thermal.txt b/Documentation/devicetree/bindings/thermal/exynos-thermal.txt
index 535fd0e..970eeba 100644
--- a/Documentation/devicetree/bindings/thermal/exynos-thermal.txt
+++ b/Documentation/devicetree/bindings/thermal/exynos-thermal.txt
@@ -6,13 +6,16 @@
"samsung,exynos4412-tmu"
"samsung,exynos4210-tmu"
"samsung,exynos5250-tmu"
+ "samsung,exynos5440-tmu"
- interrupt-parent : The phandle for the interrupt controller
-- reg : Address range of the thermal registers
+- reg : Address range of the thermal registers. For exynos5440-tmu which has 3
+ instances of TMU, 2 set of register has to supplied. First set belongs
+ to each instance of TMU and second set belongs to common TMU registers.
- interrupts : Should contain interrupt for thermal system
- clocks : The main clock for TMU device
- clock-names : Thermal system clock name

-Example:
+Example 1):

tmu@100C0000 {
compatible = "samsung,exynos4412-tmu";
@@ -23,3 +26,24 @@ Example:
clock-names = "tmu_apbif";
status = "disabled";
};
+
+Example 2):
+
+ tmuctrl_0: tmuctrl@160118 {
+ compatible = "samsung,exynos5440-tmu";
+ reg = <0x160118 0x230>, <0x160368 0x10>;
+ interrupts = <0 58 0>;
+ clocks = <&clock 21>;
+ clock-names = "tmu_apbif";
+ };
+
+Note: For multi-instance tmu each instance should have an alias correctly
+numbered in "aliases" node.
+
+Example:
+
+aliases {
+ tmuctrl0 = &tmuctrl_0;
+ tmuctrl1 = &tmuctrl_1;
+ tmuctrl2 = &tmuctrl_2;
+};
diff --git a/drivers/thermal/samsung/Kconfig b/drivers/thermal/samsung/Kconfig
index f23f533..fce04f3 100644
--- a/drivers/thermal/samsung/Kconfig
+++ b/drivers/thermal/samsung/Kconfig
@@ -19,10 +19,10 @@ config EXYNOS_THERMAL_CORE

config EXYNOS_THERMAL_DATA
bool "Temperature sensor congiguration data for EXYNOS series SOC"
- depends on (CPU_EXYNOS4210 || SOC_EXYNOS4212 || SOC_EXYNOS4412 || SOC_EXYNOS5250)
+ depends on (CPU_EXYNOS4210 || SOC_EXYNOS4212 || SOC_EXYNOS4412 || SOC_EXYNOS5250 || SOC_EXYNOS5440)
depends on EXYNOS_THERMAL
help
If you say yes here you can enable TMU (Thermal Management Unit) on
- SAMSUNG EXYNOS 4210, 4412, 4414 and 5250 series of SoC. This option
+ SAMSUNG EXYNOS 4210, 4412, 4414, 5250 and 5440 series of SoC. This option
enables/prepares the configuration, trip and cooling data for the TMU
driver.
diff --git a/drivers/thermal/samsung/exynos_thermal_common.c b/drivers/thermal/samsung/exynos_thermal_common.c
index b0dc63e..de43e18 100644
--- a/drivers/thermal/samsung/exynos_thermal_common.c
+++ b/drivers/thermal/samsung/exynos_thermal_common.c
@@ -370,7 +370,7 @@ int exynos_register_thermal(struct thermal_sensor_conf *sensor_conf)
th_zone->mode = THERMAL_DEVICE_ENABLED;
sensor_conf->pzone_data = th_zone;

- pr_info("Exynos: Kernel Thermal management registered\n");
+ pr_info("Exynos: Thermal zone(%s) registered\n", sensor_conf->name);

return 0;

diff --git a/drivers/thermal/samsung/exynos_tmu.c b/drivers/thermal/samsung/exynos_tmu.c
index c1a8c5f..72446c9 100644
--- a/drivers/thermal/samsung/exynos_tmu.c
+++ b/drivers/thermal/samsung/exynos_tmu.c
@@ -44,6 +44,7 @@
* @id: identifier of the one instance of the TMU controller.
* @pdata: pointer to the tmu platform/configuration data
* @base: base address of the single instance of the TMU controller.
+ * @base_common: base address of the common registers of the TMU controller.
* @irq: irq number of the TMU controller.
* @soc: id of the SOC type.
* @irq_work: pointer to the irq work structure.
@@ -57,6 +58,7 @@ struct exynos_tmu_data {
int id;
struct exynos_tmu_platform_data *pdata;
void __iomem *base;
+ void __iomem *base_common;
int irq;
enum soc_type soc;
struct work_struct irq_work;
@@ -75,6 +77,9 @@ static int temp_to_code(struct exynos_tmu_data *data, u8 temp)
struct exynos_tmu_platform_data *pdata = data->pdata;
int temp_code;

+ if (pdata->cal_mode == HW_MODE)
+ return temp;
+
if (data->soc == SOC_ARCH_EXYNOS4210)
/* temp should range between 25 and 125 */
if (temp < 25 || temp > 125) {
@@ -109,6 +114,9 @@ static int code_to_temp(struct exynos_tmu_data *data, u8 temp_code)
struct exynos_tmu_platform_data *pdata = data->pdata;
int temp;

+ if (pdata->cal_mode == HW_MODE)
+ return temp_code;
+
if (data->soc == SOC_ARCH_EXYNOS4210)
/* temp_code should range between 75 and 175 */
if (temp_code < 75 || temp_code > 175) {
@@ -139,33 +147,63 @@ static int exynos_tmu_initialize(struct platform_device *pdev)
struct exynos_tmu_data *data = platform_get_drvdata(pdev);
struct exynos_tmu_platform_data *pdata = data->pdata;
struct exynos_tmu_registers *reg = pdata->registers;
- unsigned int status, trim_info, con;
+ unsigned int status, trim_info = 0, con;
unsigned int rising_threshold = 0, falling_threshold = 0;
int ret = 0, threshold_code, i, trigger_levs = 0;

mutex_lock(&data->lock);
clk_enable(data->clk);

- status = readb(data->base + reg->tmu_status);
- if (!status) {
- ret = -EBUSY;
- goto out;
+ if (TMU_SUPPORTS(pdata, READY_STATUS)) {
+ status = readb(data->base + reg->tmu_status);
+ if (!status) {
+ ret = -EBUSY;
+ goto out;
+ }
}

if (TMU_SUPPORTS(pdata, TRIM_RELOAD))
__raw_writel(1, data->base + reg->triminfo_ctrl);

+ if (pdata->cal_mode == HW_MODE)
+ goto skip_calib_data;
+
/* Save trimming info in order to perform calibration */
- trim_info = readl(data->base + reg->triminfo_data);
+ if (data->soc == SOC_ARCH_EXYNOS5440) {
+ /*
+ * For exynos5440 soc triminfo value is swapped between TMU0 and
+ * TMU2, so the below logic is needed.
+ */
+ switch (data->id) {
+ case 0:
+ trim_info = readl(data->base +
+ EXYNOS5440_EFUSE_SWAP_OFFSET + reg->triminfo_data);
+ break;
+ case 1:
+ trim_info = readl(data->base + reg->triminfo_data);
+ break;
+ case 2:
+ trim_info = readl(data->base -
+ EXYNOS5440_EFUSE_SWAP_OFFSET + reg->triminfo_data);
+ }
+ } else {
+ trim_info = readl(data->base + reg->triminfo_data);
+ }
data->temp_error1 = trim_info & EXYNOS_TMU_TEMP_MASK;
data->temp_error2 = ((trim_info >> reg->triminfo_85_shift) &
EXYNOS_TMU_TEMP_MASK);

- if ((pdata->min_efuse_value > data->temp_error1) ||
- (data->temp_error1 > pdata->max_efuse_value) ||
- (data->temp_error2 != 0))
- data->temp_error1 = pdata->efuse_value;
+ if (!data->temp_error1 ||
+ (pdata->min_efuse_value > data->temp_error1) ||
+ (data->temp_error1 > pdata->max_efuse_value))
+ data->temp_error1 = pdata->efuse_value & EXYNOS_TMU_TEMP_MASK;
+
+ if (!data->temp_error2)
+ data->temp_error2 =
+ (pdata->efuse_value >> reg->triminfo_85_shift) &
+ EXYNOS_TMU_TEMP_MASK;

+skip_calib_data:
/* Count trigger levels to be enabled */
for (i = 0; i < MAX_THRESHOLD_LEVS; i++)
if (pdata->trigger_levels[i])
@@ -185,9 +223,10 @@ static int exynos_tmu_initialize(struct platform_device *pdev)
data->base + reg->threshold_th0 + i * 4);

writel(reg->inten_rise_mask, data->base + reg->tmu_intclear);
- } else if (data->soc == SOC_ARCH_EXYNOS) {
+ } else if (data->soc == SOC_ARCH_EXYNOS ||
+ data->soc == SOC_ARCH_EXYNOS5440) {
/* Write temperature code for rising and falling threshold */
- for (i = 0; i < trigger_levs; i++) {
+ for (i = 0; i < trigger_levs && i < 4 ; i++) {
threshold_code = temp_to_code(data,
pdata->trigger_levels[i]);
if (threshold_code < 0) {
@@ -218,7 +257,29 @@ static int exynos_tmu_initialize(struct platform_device *pdev)
writel((reg->inten_rise_mask << reg->inten_rise_shift) |
(reg->inten_fall_mask << reg->inten_fall_shift),
data->base + reg->tmu_intclear);
+
+ /* if 5th threshold limit is also present, use TH2 register */
+ i = 4;
+ if (pdata->trigger_levels[i]) {
+ threshold_code = temp_to_code(data,
+ pdata->trigger_levels[i]);
+ if (threshold_code < 0) {
+ ret = threshold_code;
+ goto out;
+ }
+ rising_threshold = threshold_code << 24;
+ writel(rising_threshold,
+ data->base + reg->threshold_th2);
+ if (pdata->trigger_type[i] == HW_TRIP) {
+ con = readl(data->base + reg->tmu_ctrl);
+ con |= (1 << reg->therm_trip_en_shift);
+ writel(con, data->base + reg->tmu_ctrl);
+ }
+ }
}
+ /*Clear the PMIN in the common TMU register*/
+ if (reg->tmu_pmin && !data->id)
+ writel(0, data->base_common + reg->tmu_pmin);
out:
clk_disable(data->clk);
mutex_unlock(&data->lock);
@@ -254,6 +315,11 @@ static void exynos_tmu_control(struct platform_device *pdev, bool on)
con |= (pdata->noise_cancel_mode << reg->therm_trip_mode_shift);
}

+ if (pdata->cal_mode == HW_MODE) {
+ con &= ~(reg->calib_mode_mask << reg->calib_mode_shift);
+ con |= pdata->cal_type << reg->calib_mode_shift;
+ }
+
if (on) {
con |= (1 << reg->core_en_shift);
interrupt_en =
@@ -317,9 +383,11 @@ static int exynos_tmu_set_emulation(void *drv_data, unsigned long temp)
if (temp) {
temp /= MCELSIUS;

- val = (EXYNOS_EMUL_TIME << reg->emul_time_shift) |
- (temp_to_code(data, temp)
- << reg->emul_temp_shift) | EXYNOS_EMUL_ENABLE;
+ if (data->soc == SOC_ARCH_EXYNOS && reg->emul_time_shift)
+ val |= (EXYNOS_EMUL_TIME << reg->emul_time_shift);
+
+ val |= (temp_to_code(data, temp) << reg->emul_temp_shift) |
+ EXYNOS_EMUL_ENABLE;
} else {
val &= ~EXYNOS_EMUL_ENABLE;
}
@@ -343,7 +411,14 @@ static void exynos_tmu_work(struct work_struct *work)
struct exynos_tmu_data, irq_work);
struct exynos_tmu_platform_data *pdata = data->pdata;
struct exynos_tmu_registers *reg = pdata->registers;
- unsigned int val_irq;
+ unsigned int val_irq, val_type;
+
+ /* Find which sensor generated this interrupt */
+ if (reg->tmu_irqstatus) {
+ val_type = readl(data->base_common + reg->tmu_irqstatus);
+ if (!((val_type >> data->id) & 0x1))
+ goto out;
+ }

exynos_report_trigger(data->reg_conf);
mutex_lock(&data->lock);
@@ -355,7 +430,7 @@ static void exynos_tmu_work(struct work_struct *work)

clk_disable(data->clk);
mutex_unlock(&data->lock);
-
+out:
enable_irq(data->irq);
}

@@ -383,6 +458,10 @@ static const struct of_device_id exynos_tmu_match[] = {
.compatible = "samsung,exynos5250-tmu",
.data = (void *)EXYNOS5250_TMU_DRV_DATA,
},
+ {
+ .compatible = "samsung,exynos5440-tmu",
+ .data = (void *)EXYNOS5440_TMU_DRV_DATA,
+ },
{},
};
MODULE_DEVICE_TABLE(of, exynos_tmu_match);
@@ -420,6 +499,7 @@ static inline struct exynos_tmu_platform_data *exynos_get_driver_data(
static int exynos_map_dt_data(struct platform_device *pdev)
{
struct exynos_tmu_data *data = platform_get_drvdata(pdev);
+ struct exynos_tmu_platform_data *pdata = data->pdata;
struct resource res;

if (!data)
@@ -436,7 +516,7 @@ static int exynos_map_dt_data(struct platform_device *pdev)
}

if (of_address_to_resource(pdev->dev.of_node, 0, &res)) {
- dev_err(&pdev->dev, "failed to get Resource\n");
+ dev_err(&pdev->dev, "failed to get Resource 0\n");
return -ENODEV;
}

@@ -445,6 +525,26 @@ static int exynos_map_dt_data(struct platform_device *pdev)
dev_err(&pdev->dev, "Failed to ioremap memory\n");
return -ENOMEM;
}
+
+ /*
+ * Check if the TMU is multi instance type and then try to map the
+ * memory of common registers.
+ */
+ if (!TMU_SUPPORTS(pdata, MULTI_INST))
+ return 0;
+
+ if (of_address_to_resource(pdev->dev.of_node, 1, &res)) {
+ dev_err(&pdev->dev, "failed to get Resource 1\n");
+ return -ENODEV;
+ }
+
+ data->base_common = devm_ioremap(&pdev->dev, res.start,
+ resource_size(&res));
+ if (!data->base) {
+ dev_err(&pdev->dev, "Failed to ioremap memory\n");
+ return -ENOMEM;
+ }
+
return 0;
}

@@ -496,7 +596,8 @@ static int exynos_tmu_probe(struct platform_device *pdev)
return ret;

if (pdata->type == SOC_ARCH_EXYNOS ||
- pdata->type == SOC_ARCH_EXYNOS4210)
+ pdata->type == SOC_ARCH_EXYNOS4210 ||
+ pdata->type == SOC_ARCH_EXYNOS5440)
data->soc = pdata->type;
else {
ret = -EINVAL;
diff --git a/drivers/thermal/samsung/exynos_tmu.h b/drivers/thermal/samsung/exynos_tmu.h
index de1c342..cc6b10e 100644
--- a/drivers/thermal/samsung/exynos_tmu.h
+++ b/drivers/thermal/samsung/exynos_tmu.h
@@ -43,6 +43,7 @@ enum trigger_type {
enum soc_type {
SOC_ARCH_EXYNOS4210 = 1,
SOC_ARCH_EXYNOS,
+ SOC_ARCH_EXYNOS5440,
};

/**
@@ -61,6 +62,7 @@ enum soc_type {
#define TMU_SUPPORT_MULTI_INST BIT(1)
#define TMU_SUPPORT_TRIM_RELOAD BIT(2)
#define TMU_SUPPORT_FALLING_TRIP BIT(3)
+#define TMU_SUPPORT_READY_STATUS BIT(4)

#define TMU_SUPPORTS(a, b) (a->features & TMU_SUPPORT_ ## b)

@@ -85,6 +87,8 @@ struct exynos_tmu_registers {
u32 therm_trip_en_shift;
u32 buf_slope_sel_shift;
u32 buf_slope_sel_mask;
+ u32 calib_mode_shift;
+ u32 calib_mode_mask;
u32 therm_trip_tq_en_shift;
u32 core_en_shift;

@@ -137,6 +141,9 @@ struct exynos_tmu_registers {
u32 emul_temp_shift;
u32 emul_time_shift;
u32 emul_time_mask;
+
+ u32 tmu_irqstatus;
+ u32 tmu_pmin;
};

/**
diff --git a/drivers/thermal/samsung/exynos_tmu_data.c b/drivers/thermal/samsung/exynos_tmu_data.c
index 8a587d4..25629e6 100644
--- a/drivers/thermal/samsung/exynos_tmu_data.c
+++ b/drivers/thermal/samsung/exynos_tmu_data.c
@@ -79,6 +79,7 @@ struct exynos_tmu_platform_data const exynos4210_default_tmu_data = {
.freq_tab_count = 2,
.type = SOC_ARCH_EXYNOS4210,
.registers = &exynos4210_tmu_registers,
+ .features = (TMU_SUPPORT_READY_STATUS),
};
#endif

@@ -155,6 +156,69 @@ struct exynos_tmu_platform_data const exynos5250_default_tmu_data = {
.type = SOC_ARCH_EXYNOS,
.registers = &exynos5250_tmu_registers,
.features = (TMU_SUPPORT_EMULATION | TMU_SUPPORT_TRIM_RELOAD |
- TMU_SUPPORT_FALLING_TRIP),
+ TMU_SUPPORT_FALLING_TRIP | TMU_SUPPORT_READY_STATUS),
+};
+#endif
+
+#if defined(CONFIG_SOC_EXYNOS5440)
+static struct exynos_tmu_registers exynos5440_tmu_registers = {
+ .triminfo_data = EXYNOS5440_TMU_S0_7_TRIM,
+ .triminfo_25_shift = EXYNOS_TRIMINFO_25_SHIFT,
+ .triminfo_85_shift = EXYNOS_TRIMINFO_85_SHIFT,
+ .tmu_ctrl = EXYNOS5440_TMU_S0_7_CTRL,
+ .buf_vref_sel_shift = EXYNOS_TMU_REF_VOLTAGE_SHIFT,
+ .buf_vref_sel_mask = EXYNOS_TMU_REF_VOLTAGE_MASK,
+ .therm_trip_mode_shift = EXYNOS_TMU_TRIP_MODE_SHIFT,
+ .therm_trip_mode_mask = EXYNOS_TMU_TRIP_MODE_MASK,
+ .therm_trip_en_shift = EXYNOS_TMU_THERM_TRIP_EN_SHIFT,
+ .buf_slope_sel_shift = EXYNOS_TMU_BUF_SLOPE_SEL_SHIFT,
+ .buf_slope_sel_mask = EXYNOS_TMU_BUF_SLOPE_SEL_MASK,
+ .calib_mode_shift = EXYNOS_TMU_CALIB_MODE_SHIFT,
+ .calib_mode_mask = EXYNOS_TMU_CALIB_MODE_MASK,
+ .core_en_shift = EXYNOS_TMU_CORE_EN_SHIFT,
+ .tmu_status = EXYNOS5440_TMU_S0_7_STATUS,
+ .tmu_cur_temp = EXYNOS5440_TMU_S0_7_TEMP,
+ .threshold_th0 = EXYNOS5440_TMU_S0_7_TH0,
+ .threshold_th1 = EXYNOS5440_TMU_S0_7_TH1,
+ .threshold_th2 = EXYNOS5440_TMU_S0_7_TH2,
+ .tmu_inten = EXYNOS5440_TMU_S0_7_IRQEN,
+ .inten_rise_mask = EXYNOS5440_TMU_RISE_INT_MASK,
+ .inten_rise_shift = EXYNOS5440_TMU_RISE_INT_SHIFT,
+ .inten_fall_mask = EXYNOS5440_TMU_FALL_INT_MASK,
+ .inten_fall_shift = EXYNOS5440_TMU_FALL_INT_SHIFT,
+ .inten_rise0_shift = EXYNOS5440_TMU_INTEN_RISE0_SHIFT,
+ .inten_rise1_shift = EXYNOS5440_TMU_INTEN_RISE1_SHIFT,
+ .inten_rise2_shift = EXYNOS5440_TMU_INTEN_RISE2_SHIFT,
+ .inten_rise3_shift = EXYNOS5440_TMU_INTEN_RISE3_SHIFT,
+ .inten_fall0_shift = EXYNOS5440_TMU_INTEN_FALL0_SHIFT,
+ .tmu_evten = EXYNOS5440_TMU_S0_7_EVTEN,
+ .tmu_intstat = EXYNOS5440_TMU_S0_7_IRQ,
+ .tmu_intclear = EXYNOS5440_TMU_S0_7_IRQ,
+ .tmu_irqstatus = EXYNOS5440_TMU_IRQ_STATUS,
+ .emul_con = EXYNOS5440_TMU_S0_7_DEBUG,
+ .emul_temp_shift = EXYNOS_EMUL_DATA_SHIFT,
+ .tmu_pmin = EXYNOS5440_TMU_PMIN,
+};
+struct exynos_tmu_platform_data const exynos5440_default_tmu_data = {
+ .trigger_levels[0] = 100,
+ .trigger_levels[4] = 105,
+ .trigger_enable[0] = 1,
+ .trigger_type[0] = 1,
+ .trigger_type[4] = 2,
+ .gain = 5,
+ .reference_voltage = 16,
+ .noise_cancel_mode = 4,
+ .cal_type = TYPE_TWO_POINT_TRIMMING,
+ .cal_mode = 0,
+ .efuse_value = 0x5b2d,
+ .min_efuse_value = 16,
+ .max_efuse_value = 76,
+ .first_point_trim = 25,
+ .second_point_trim = 70,
+ .default_temp_offset = 25,
+ .type = SOC_ARCH_EXYNOS5440,
+ .registers = &exynos5440_tmu_registers,
+ .features = (TMU_SUPPORT_EMULATION | TMU_SUPPORT_FALLING_TRIP |
+ TMU_SUPPORT_MULTI_INST),
};
#endif
diff --git a/drivers/thermal/samsung/exynos_tmu_data.h b/drivers/thermal/samsung/exynos_tmu_data.h
index 0560413..c409f3a 100644
--- a/drivers/thermal/samsung/exynos_tmu_data.h
+++ b/drivers/thermal/samsung/exynos_tmu_data.h
@@ -75,6 +75,8 @@
#define EXYNOS_TMU_TRIP_MODE_SHIFT 13
#define EXYNOS_TMU_TRIP_MODE_MASK 0x7
#define EXYNOS_TMU_THERM_TRIP_EN_SHIFT 12
+#define EXYNOS_TMU_CALIB_MODE_SHIFT 4
+#define EXYNOS_TMU_CALIB_MODE_MASK 0x3

#define EXYNOS_TMU_INTEN_RISE0_SHIFT 0
#define EXYNOS_TMU_INTEN_RISE1_SHIFT 4
@@ -91,6 +93,37 @@
#define EXYNOS_EMUL_DATA_MASK 0xFF
#define EXYNOS_EMUL_ENABLE 0x1

+/*exynos5440 specific registers*/
+#define EXYNOS5440_TMU_S0_7_TRIM 0x000
+#define EXYNOS5440_TMU_S0_7_CTRL 0x020
+#define EXYNOS5440_TMU_S0_7_DEBUG 0x040
+#define EXYNOS5440_TMU_S0_7_STATUS 0x060
+#define EXYNOS5440_TMU_S0_7_TEMP 0x0f0
+#define EXYNOS5440_TMU_S0_7_TH0 0x110
+#define EXYNOS5440_TMU_S0_7_TH1 0x130
+#define EXYNOS5440_TMU_S0_7_TH2 0x150
+#define EXYNOS5440_TMU_S0_7_EVTEN 0x1F0
+#define EXYNOS5440_TMU_S0_7_IRQEN 0x210
+#define EXYNOS5440_TMU_S0_7_IRQ 0x230
+/* exynos5440 common registers */
+#define EXYNOS5440_TMU_IRQ_STATUS 0x000
+#define EXYNOS5440_TMU_PMIN 0x004
+#define EXYNOS5440_TMU_TEMP 0x008
+
+#define EXYNOS5440_EFUSE_SWAP_OFFSET 8
+#define EXYNOS5440_TMU_RISE_INT_MASK 0xf
+#define EXYNOS5440_TMU_RISE_INT_SHIFT 0
+#define EXYNOS5440_TMU_FALL_INT_MASK 0xf
+#define EXYNOS5440_TMU_FALL_INT_SHIFT 4
+#define EXYNOS5440_TMU_INTEN_RISE0_SHIFT 0
+#define EXYNOS5440_TMU_INTEN_RISE1_SHIFT 1
+#define EXYNOS5440_TMU_INTEN_RISE2_SHIFT 2
+#define EXYNOS5440_TMU_INTEN_RISE3_SHIFT 3
+#define EXYNOS5440_TMU_INTEN_FALL0_SHIFT 4
+#define EXYNOS5440_TMU_INTEN_FALL1_SHIFT 5
+#define EXYNOS5440_TMU_INTEN_FALL2_SHIFT 6
+#define EXYNOS5440_TMU_INTEN_FALL3_SHIFT 7
+
#if defined(CONFIG_CPU_EXYNOS4210) && defined(CONFIG_EXYNOS_THERMAL_DATA)
extern struct exynos_tmu_platform_data const exynos4210_default_tmu_data;
#define EXYNOS4210_TMU_DRV_DATA (&exynos4210_default_tmu_data)
@@ -106,4 +139,11 @@ extern struct exynos_tmu_platform_data const exynos5250_default_tmu_data;
#define EXYNOS5250_TMU_DRV_DATA (NULL)
#endif

+#if defined(CONFIG_SOC_EXYNOS5440) && defined(CONFIG_EXYNOS_THERMAL_DATA)
+extern struct exynos_tmu_platform_data const exynos5440_default_tmu_data;
+#define EXYNOS5440_TMU_DRV_DATA (&exynos5440_default_tmu_data)
+#else
+#define EXYNOS5440_TMU_DRV_DATA (NULL)
+#endif
+
#endif /*_LINUX_EXYNOS_TMU_DATA_H*/
--
1.7.1

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/