Re: [PATCH V2 02/20] thermal: exynos: Bifurcate exynos thermalcommon and tmu controller code

From: Zhang Rui
Date: Mon May 06 2013 - 11:17:06 EST


On Fri, 2013-04-26 at 16:07 +0530, Amit Daniel Kachhap wrote:
> This code bifurcates exynos thermal implementation into common and sensor
> specific parts. The common thermal code interacts with core thermal layer and
> core cpufreq cooling parts and is independent of SOC specific driver. This
> change is needed to cleanly add support for new TMU sensors.
>
> Acked-by: Kukjin Kim <kgene.kim@xxxxxxxxxxx>
> Signed-off-by: Amit Daniel Kachhap <amit.daniel@xxxxxxxxxxx>
> ---
> drivers/thermal/samsung/Kconfig | 26 +-
> drivers/thermal/samsung/Makefile | 4 +-
> drivers/thermal/samsung/exynos_thermal.c | 421 +----------------------
> drivers/thermal/samsung/exynos_thermal_common.c | 389 +++++++++++++++++++++
> drivers/thermal/samsung/exynos_thermal_common.h | 71 ++++
> 5 files changed, 491 insertions(+), 420 deletions(-)
> create mode 100644 drivers/thermal/samsung/exynos_thermal_common.c
> create mode 100644 drivers/thermal/samsung/exynos_thermal_common.h
>
> diff --git a/drivers/thermal/samsung/Kconfig b/drivers/thermal/samsung/Kconfig
> index 2d3d9dc..1e3ba31 100644
> --- a/drivers/thermal/samsung/Kconfig
> +++ b/drivers/thermal/samsung/Kconfig
> @@ -1,9 +1,21 @@
> -config EXYNOS_THERMAL
> - tristate "Temperature sensor on Samsung EXYNOS"
> +config EXYNOS_COMMON

EXYNOS_COMMON is misleading here, better use EXYNOS_THERMAL_COMMON?

> + bool "Common thermal support for EXYNOS SOC's"
> depends on (ARCH_EXYNOS4 || ARCH_EXYNOS5)
> - depends on CPU_THERMAL
> help
> - If you say yes here you get support for TMU (Thermal Management
> - Unit) on SAMSUNG EXYNOS series of SoC. This helps in registering
> - the exynos thermal driver with the core thermal layer and cpu
> - cooling API's.
> + If you say yes here you get support for EXYNOS TMU
> + (Thermal Management Unit) common registration/unregistration
> + functions to the core thermal layer and also to use the generic
> + cpu cooling API's.
> +
> +if EXYNOS_COMMON
> +
> +config EXYNOS_SOC_THERMAL
> + tristate "Temperature sensor on Samsung EXYNOS series SOC"
> + depends on (CPU_EXYNOS4210 || SOC_EXYNOS4212 || SOC_EXYNOS4412 || SOC_EXYNOS5250)
> + help
> + If you say yes here you can enable TMU (Thermal Management Unit) on
> + SAMSUNG EXYNOS 4210, 4412, 4414 and 5250 series of SoC. This option
> + initialises the TMU controller and registers/unregisters with exynos
> + common thermal layer.
> +
> +endif
> diff --git a/drivers/thermal/samsung/Makefile b/drivers/thermal/samsung/Makefile
> index 1fe6d93..fcda5b4 100644
> --- a/drivers/thermal/samsung/Makefile
> +++ b/drivers/thermal/samsung/Makefile
> @@ -1,4 +1,6 @@
> #
> # Samsung thermal specific Makefile
> #
> -obj-$(CONFIG_EXYNOS_THERMAL) += exynos_thermal.o
> +obj-$(CONFIG_EXYNOS_SOC_THERMAL) += exynos_soc_thermal.o
> +exynos_soc_thermal-y := exynos_thermal.o
> +exynos_soc_thermal-$(CONFIG_EXYNOS_COMMON) += exynos_thermal_common.o

the Makefile suggests that exynos_soc_thermal driver could be built
without CONFIG_EXYNOS_COMMON.
But the Kconfig file shows that exynos_soc_thermal depends on
CONFIG_EXYNOS_COMMON.
If exynos_thermal_common.c contains the code to interact with the
generic thermal layer and you do not want a soc driver without thermal
support, just remove CONFIG_EXYNOS_COMMON and always build it into
exynos_soc_thermal.o.
what do you think?

thanks,
rui
> diff --git a/drivers/thermal/samsung/exynos_thermal.c b/drivers/thermal/samsung/exynos_thermal.c
> index d20ce9e..4c85945 100644
> --- a/drivers/thermal/samsung/exynos_thermal.c
> +++ b/drivers/thermal/samsung/exynos_thermal.c
> @@ -21,23 +21,19 @@
> *
> */
>
> -#include <linux/module.h>
> -#include <linux/err.h>
> -#include <linux/kernel.h>
> -#include <linux/slab.h>
> -#include <linux/platform_device.h>
> -#include <linux/interrupt.h>
> #include <linux/clk.h>
> -#include <linux/workqueue.h>
> -#include <linux/sysfs.h>
> -#include <linux/kobject.h>
> #include <linux/io.h>
> +#include <linux/interrupt.h>
> +#include <linux/kernel.h>
> +#include <linux/kobject.h>
> +#include <linux/module.h>
> #include <linux/mutex.h>
> -#include <linux/platform_data/exynos_thermal.h>
> -#include <linux/thermal.h>
> -#include <linux/cpufreq.h>
> -#include <linux/cpu_cooling.h>
> #include <linux/of.h>
> +#include <linux/platform_device.h>
> +#include <linux/platform_data/exynos_thermal.h>
> +#include <linux/slab.h>
> +#include <linux/workqueue.h>
> +#include "exynos_thermal_common.h"
>
> /* Exynos generic registers */
> #define EXYNOS_TMU_REG_TRIMINFO 0x0
> @@ -88,16 +84,6 @@
> #define EFUSE_MIN_VALUE 40
> #define EFUSE_MAX_VALUE 100
>
> -/* In-kernel thermal framework related macros & definations */
> -#define SENSOR_NAME_LEN 16
> -#define MAX_TRIP_COUNT 8
> -#define MAX_COOLING_DEVICE 4
> -#define MAX_THRESHOLD_LEVS 4
> -
> -#define ACTIVE_INTERVAL 500
> -#define IDLE_INTERVAL 10000
> -#define MCELSIUS 1000
> -
> #ifdef CONFIG_THERMAL_EMULATION
> #define EXYNOS_EMUL_TIME 0x57F0
> #define EXYNOS_EMUL_TIME_SHIFT 16
> @@ -106,17 +92,6 @@
> #define EXYNOS_EMUL_ENABLE 0x1
> #endif /* CONFIG_THERMAL_EMULATION */
>
> -/* CPU Zone information */
> -#define PANIC_ZONE 4
> -#define WARN_ZONE 3
> -#define MONITOR_ZONE 2
> -#define SAFE_ZONE 1
> -
> -#define GET_ZONE(trip) (trip + 2)
> -#define GET_TRIP(zone) (zone - 2)
> -
> -#define EXYNOS_ZONE_COUNT 3
> -
> struct exynos_tmu_data {
> struct exynos_tmu_platform_data *pdata;
> struct resource *mem;
> @@ -129,384 +104,6 @@ struct exynos_tmu_data {
> u8 temp_error1, temp_error2;
> };
>
> -struct thermal_trip_point_conf {
> - int trip_val[MAX_TRIP_COUNT];
> - int trip_count;
> - u8 trigger_falling;
> -};
> -
> -struct thermal_cooling_conf {
> - struct freq_clip_table freq_data[MAX_TRIP_COUNT];
> - int freq_clip_count;
> -};
> -
> -struct thermal_sensor_conf {
> - char name[SENSOR_NAME_LEN];
> - int (*read_temperature)(void *data);
> - int (*write_emul_temp)(void *drv_data, unsigned long temp);
> - struct thermal_trip_point_conf trip_data;
> - struct thermal_cooling_conf cooling_data;
> - void *private_data;
> -};
> -
> -struct exynos_thermal_zone {
> - enum thermal_device_mode mode;
> - struct thermal_zone_device *therm_dev;
> - struct thermal_cooling_device *cool_dev[MAX_COOLING_DEVICE];
> - unsigned int cool_dev_size;
> - struct platform_device *exynos4_dev;
> - struct thermal_sensor_conf *sensor_conf;
> - bool bind;
> -};
> -
> -static struct exynos_thermal_zone *th_zone;
> -static void exynos_unregister_thermal(void);
> -static int exynos_register_thermal(struct thermal_sensor_conf *sensor_conf);
> -
> -/* Get mode callback functions for thermal zone */
> -static int exynos_get_mode(struct thermal_zone_device *thermal,
> - enum thermal_device_mode *mode)
> -{
> - if (th_zone)
> - *mode = th_zone->mode;
> - return 0;
> -}
> -
> -/* Set mode callback functions for thermal zone */
> -static int exynos_set_mode(struct thermal_zone_device *thermal,
> - enum thermal_device_mode mode)
> -{
> - if (!th_zone->therm_dev) {
> - pr_notice("thermal zone not registered\n");
> - return 0;
> - }
> -
> - mutex_lock(&th_zone->therm_dev->lock);
> -
> - if (mode == THERMAL_DEVICE_ENABLED &&
> - !th_zone->sensor_conf->trip_data.trigger_falling)
> - th_zone->therm_dev->polling_delay = IDLE_INTERVAL;
> - else
> - th_zone->therm_dev->polling_delay = 0;
> -
> - mutex_unlock(&th_zone->therm_dev->lock);
> -
> - th_zone->mode = mode;
> - thermal_zone_device_update(th_zone->therm_dev);
> - pr_info("thermal polling set for duration=%d msec\n",
> - th_zone->therm_dev->polling_delay);
> - return 0;
> -}
> -
> -
> -/* Get trip type callback functions for thermal zone */
> -static int exynos_get_trip_type(struct thermal_zone_device *thermal, int trip,
> - enum thermal_trip_type *type)
> -{
> - switch (GET_ZONE(trip)) {
> - case MONITOR_ZONE:
> - case WARN_ZONE:
> - *type = THERMAL_TRIP_ACTIVE;
> - break;
> - case PANIC_ZONE:
> - *type = THERMAL_TRIP_CRITICAL;
> - break;
> - default:
> - return -EINVAL;
> - }
> - return 0;
> -}
> -
> -/* Get trip temperature callback functions for thermal zone */
> -static int exynos_get_trip_temp(struct thermal_zone_device *thermal, int trip,
> - unsigned long *temp)
> -{
> - if (trip < GET_TRIP(MONITOR_ZONE) || trip > GET_TRIP(PANIC_ZONE))
> - return -EINVAL;
> -
> - *temp = th_zone->sensor_conf->trip_data.trip_val[trip];
> - /* convert the temperature into millicelsius */
> - *temp = *temp * MCELSIUS;
> -
> - return 0;
> -}
> -
> -/* Get critical temperature callback functions for thermal zone */
> -static int exynos_get_crit_temp(struct thermal_zone_device *thermal,
> - unsigned long *temp)
> -{
> - int ret;
> - /* Panic zone */
> - ret = exynos_get_trip_temp(thermal, GET_TRIP(PANIC_ZONE), temp);
> - return ret;
> -}
> -
> -/* Bind callback functions for thermal zone */
> -static int exynos_bind(struct thermal_zone_device *thermal,
> - struct thermal_cooling_device *cdev)
> -{
> - int ret = 0, i, tab_size, level;
> - struct freq_clip_table *tab_ptr, *clip_data;
> - struct thermal_sensor_conf *data = th_zone->sensor_conf;
> -
> - tab_ptr = (struct freq_clip_table *)data->cooling_data.freq_data;
> - tab_size = data->cooling_data.freq_clip_count;
> -
> - if (tab_ptr == NULL || tab_size == 0)
> - return -EINVAL;
> -
> - /* find the cooling device registered*/
> - for (i = 0; i < th_zone->cool_dev_size; i++)
> - if (cdev == th_zone->cool_dev[i])
> - break;
> -
> - /* No matching cooling device */
> - if (i == th_zone->cool_dev_size)
> - return 0;
> -
> - /* Bind the thermal zone to the cpufreq cooling device */
> - for (i = 0; i < tab_size; i++) {
> - clip_data = (struct freq_clip_table *)&(tab_ptr[i]);
> - level = cpufreq_cooling_get_level(0, clip_data->freq_clip_max);
> - if (level == THERMAL_CSTATE_INVALID)
> - return 0;
> - switch (GET_ZONE(i)) {
> - case MONITOR_ZONE:
> - case WARN_ZONE:
> - if (thermal_zone_bind_cooling_device(thermal, i, cdev,
> - level, 0)) {
> - pr_err("error binding cdev inst %d\n", i);
> - ret = -EINVAL;
> - }
> - th_zone->bind = true;
> - break;
> - default:
> - ret = -EINVAL;
> - }
> - }
> -
> - return ret;
> -}
> -
> -/* Unbind callback functions for thermal zone */
> -static int exynos_unbind(struct thermal_zone_device *thermal,
> - struct thermal_cooling_device *cdev)
> -{
> - int ret = 0, i, tab_size;
> - struct thermal_sensor_conf *data = th_zone->sensor_conf;
> -
> - if (th_zone->bind == false)
> - return 0;
> -
> - tab_size = data->cooling_data.freq_clip_count;
> -
> - if (tab_size == 0)
> - return -EINVAL;
> -
> - /* find the cooling device registered*/
> - for (i = 0; i < th_zone->cool_dev_size; i++)
> - if (cdev == th_zone->cool_dev[i])
> - break;
> -
> - /* No matching cooling device */
> - if (i == th_zone->cool_dev_size)
> - return 0;
> -
> - /* Bind the thermal zone to the cpufreq cooling device */
> - for (i = 0; i < tab_size; i++) {
> - switch (GET_ZONE(i)) {
> - case MONITOR_ZONE:
> - case WARN_ZONE:
> - if (thermal_zone_unbind_cooling_device(thermal, i,
> - cdev)) {
> - pr_err("error unbinding cdev inst=%d\n", i);
> - ret = -EINVAL;
> - }
> - th_zone->bind = false;
> - break;
> - default:
> - ret = -EINVAL;
> - }
> - }
> - return ret;
> -}
> -
> -/* Get temperature callback functions for thermal zone */
> -static int exynos_get_temp(struct thermal_zone_device *thermal,
> - unsigned long *temp)
> -{
> - void *data;
> -
> - if (!th_zone->sensor_conf) {
> - pr_info("Temperature sensor not initialised\n");
> - return -EINVAL;
> - }
> - data = th_zone->sensor_conf->private_data;
> - *temp = th_zone->sensor_conf->read_temperature(data);
> - /* convert the temperature into millicelsius */
> - *temp = *temp * MCELSIUS;
> - return 0;
> -}
> -
> -/* Get temperature callback functions for thermal zone */
> -static int exynos_set_emul_temp(struct thermal_zone_device *thermal,
> - unsigned long temp)
> -{
> - void *data;
> - int ret = -EINVAL;
> -
> - if (!th_zone->sensor_conf) {
> - pr_info("Temperature sensor not initialised\n");
> - return -EINVAL;
> - }
> - data = th_zone->sensor_conf->private_data;
> - if (th_zone->sensor_conf->write_emul_temp)
> - ret = th_zone->sensor_conf->write_emul_temp(data, temp);
> - return ret;
> -}
> -
> -/* Get the temperature trend */
> -static int exynos_get_trend(struct thermal_zone_device *thermal,
> - int trip, enum thermal_trend *trend)
> -{
> - int ret;
> - unsigned long trip_temp;
> -
> - ret = exynos_get_trip_temp(thermal, trip, &trip_temp);
> - if (ret < 0)
> - return ret;
> -
> - if (thermal->temperature >= trip_temp)
> - *trend = THERMAL_TREND_RAISE_FULL;
> - else
> - *trend = THERMAL_TREND_DROP_FULL;
> -
> - return 0;
> -}
> -/* Operation callback functions for thermal zone */
> -static struct thermal_zone_device_ops const exynos_dev_ops = {
> - .bind = exynos_bind,
> - .unbind = exynos_unbind,
> - .get_temp = exynos_get_temp,
> - .set_emul_temp = exynos_set_emul_temp,
> - .get_trend = exynos_get_trend,
> - .get_mode = exynos_get_mode,
> - .set_mode = exynos_set_mode,
> - .get_trip_type = exynos_get_trip_type,
> - .get_trip_temp = exynos_get_trip_temp,
> - .get_crit_temp = exynos_get_crit_temp,
> -};
> -
> -/*
> - * This function may be called from interrupt based temperature sensor
> - * when threshold is changed.
> - */
> -static void exynos_report_trigger(void)
> -{
> - unsigned int i;
> - char data[10];
> - char *envp[] = { data, NULL };
> -
> - if (!th_zone || !th_zone->therm_dev)
> - return;
> - if (th_zone->bind == false) {
> - for (i = 0; i < th_zone->cool_dev_size; i++) {
> - if (!th_zone->cool_dev[i])
> - continue;
> - exynos_bind(th_zone->therm_dev,
> - th_zone->cool_dev[i]);
> - }
> - }
> -
> - thermal_zone_device_update(th_zone->therm_dev);
> -
> - mutex_lock(&th_zone->therm_dev->lock);
> - /* Find the level for which trip happened */
> - for (i = 0; i < th_zone->sensor_conf->trip_data.trip_count; i++) {
> - if (th_zone->therm_dev->last_temperature <
> - th_zone->sensor_conf->trip_data.trip_val[i] * MCELSIUS)
> - break;
> - }
> -
> - if (th_zone->mode == THERMAL_DEVICE_ENABLED &&
> - !th_zone->sensor_conf->trip_data.trigger_falling) {
> - if (i > 0)
> - th_zone->therm_dev->polling_delay = ACTIVE_INTERVAL;
> - else
> - th_zone->therm_dev->polling_delay = IDLE_INTERVAL;
> - }
> -
> - snprintf(data, sizeof(data), "%u", i);
> - kobject_uevent_env(&th_zone->therm_dev->device.kobj, KOBJ_CHANGE, envp);
> - mutex_unlock(&th_zone->therm_dev->lock);
> -}
> -
> -/* Register with the in-kernel thermal management */
> -static int exynos_register_thermal(struct thermal_sensor_conf *sensor_conf)
> -{
> - int ret;
> - struct cpumask mask_val;
> -
> - if (!sensor_conf || !sensor_conf->read_temperature) {
> - pr_err("Temperature sensor not initialised\n");
> - return -EINVAL;
> - }
> -
> - th_zone = kzalloc(sizeof(struct exynos_thermal_zone), GFP_KERNEL);
> - if (!th_zone)
> - return -ENOMEM;
> -
> - th_zone->sensor_conf = sensor_conf;
> - cpumask_set_cpu(0, &mask_val);
> - th_zone->cool_dev[0] = cpufreq_cooling_register(&mask_val);
> - if (IS_ERR(th_zone->cool_dev[0])) {
> - pr_err("Failed to register cpufreq cooling device\n");
> - ret = -EINVAL;
> - goto err_unregister;
> - }
> - th_zone->cool_dev_size++;
> -
> - th_zone->therm_dev = thermal_zone_device_register(sensor_conf->name,
> - EXYNOS_ZONE_COUNT, 0, NULL, &exynos_dev_ops, NULL, 0,
> - sensor_conf->trip_data.trigger_falling ?
> - 0 : IDLE_INTERVAL);
> -
> - if (IS_ERR(th_zone->therm_dev)) {
> - pr_err("Failed to register thermal zone device\n");
> - ret = PTR_ERR(th_zone->therm_dev);
> - goto err_unregister;
> - }
> - th_zone->mode = THERMAL_DEVICE_ENABLED;
> -
> - pr_info("Exynos: Kernel Thermal management registered\n");
> -
> - return 0;
> -
> -err_unregister:
> - exynos_unregister_thermal();
> - return ret;
> -}
> -
> -/* Un-Register with the in-kernel thermal management */
> -static void exynos_unregister_thermal(void)
> -{
> - int i;
> -
> - if (!th_zone)
> - return;
> -
> - if (th_zone->therm_dev)
> - thermal_zone_device_unregister(th_zone->therm_dev);
> -
> - for (i = 0; i < th_zone->cool_dev_size; i++) {
> - if (th_zone->cool_dev[i])
> - cpufreq_cooling_unregister(th_zone->cool_dev[i]);
> - }
> -
> - kfree(th_zone);
> - pr_info("Exynos: Kernel Thermal management unregistered\n");
> -}
> -
> /*
> * TMU treats temperature as a mapped temperature code.
> * The temperature is converted differently depending on the calibration type.
> diff --git a/drivers/thermal/samsung/exynos_thermal_common.c b/drivers/thermal/samsung/exynos_thermal_common.c
> new file mode 100644
> index 0000000..9a57606
> --- /dev/null
> +++ b/drivers/thermal/samsung/exynos_thermal_common.c
> @@ -0,0 +1,389 @@
> +/*
> + * exynos_thermal_common.c - Samsung EXYNOS common thermal file
> + *
> + * Copyright (C) 2013 Samsung Electronics
> + * Amit Daniel Kachhap <amit.daniel@xxxxxxxxxxx>
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License as published by
> + * the Free Software Foundation; either version 2 of the License, or
> + * (at your option) any later version.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + *
> + * You should have received a copy of the GNU General Public License
> + * along with this program; if not, write to the Free Software
> + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
> + *
> + */
> +
> +#include <linux/cpufreq.h>
> +#include <linux/cpu_cooling.h>
> +#include <linux/err.h>
> +#include <linux/io.h>
> +#include <linux/kernel.h>
> +#include <linux/kobject.h>
> +#include <linux/mutex.h>
> +#include <linux/platform_data/exynos_thermal.h>
> +#include <linux/slab.h>
> +#include <linux/thermal.h>
> +#include "exynos_thermal_common.h"
> +
> +struct exynos_thermal_zone {
> + enum thermal_device_mode mode;
> + struct thermal_zone_device *therm_dev;
> + struct thermal_cooling_device *cool_dev[MAX_COOLING_DEVICE];
> + unsigned int cool_dev_size;
> + struct platform_device *exynos4_dev;
> + struct thermal_sensor_conf *sensor_conf;
> + bool bind;
> +};
> +
> +static struct exynos_thermal_zone *th_zone;
> +
> +/* Get mode callback functions for thermal zone */
> +static int exynos_get_mode(struct thermal_zone_device *thermal,
> + enum thermal_device_mode *mode)
> +{
> + if (th_zone)
> + *mode = th_zone->mode;
> + return 0;
> +}
> +
> +/* Set mode callback functions for thermal zone */
> +static int exynos_set_mode(struct thermal_zone_device *thermal,
> + enum thermal_device_mode mode)
> +{
> + if (!th_zone->therm_dev) {
> + pr_notice("thermal zone not registered\n");
> + return 0;
> + }
> +
> + mutex_lock(&th_zone->therm_dev->lock);
> +
> + if (mode == THERMAL_DEVICE_ENABLED &&
> + !th_zone->sensor_conf->trip_data.trigger_falling)
> + th_zone->therm_dev->polling_delay = IDLE_INTERVAL;
> + else
> + th_zone->therm_dev->polling_delay = 0;
> +
> + mutex_unlock(&th_zone->therm_dev->lock);
> +
> + th_zone->mode = mode;
> + thermal_zone_device_update(th_zone->therm_dev);
> + pr_info("thermal polling set for duration=%d msec\n",
> + th_zone->therm_dev->polling_delay);
> + return 0;
> +}
> +
> +
> +/* Get trip type callback functions for thermal zone */
> +static int exynos_get_trip_type(struct thermal_zone_device *thermal, int trip,
> + enum thermal_trip_type *type)
> +{
> + switch (GET_ZONE(trip)) {
> + case MONITOR_ZONE:
> + case WARN_ZONE:
> + *type = THERMAL_TRIP_ACTIVE;
> + break;
> + case PANIC_ZONE:
> + *type = THERMAL_TRIP_CRITICAL;
> + break;
> + default:
> + return -EINVAL;
> + }
> + return 0;
> +}
> +
> +/* Get trip temperature callback functions for thermal zone */
> +static int exynos_get_trip_temp(struct thermal_zone_device *thermal, int trip,
> + unsigned long *temp)
> +{
> + if (trip < GET_TRIP(MONITOR_ZONE) || trip > GET_TRIP(PANIC_ZONE))
> + return -EINVAL;
> +
> + *temp = th_zone->sensor_conf->trip_data.trip_val[trip];
> + /* convert the temperature into millicelsius */
> + *temp = *temp * MCELSIUS;
> +
> + return 0;
> +}
> +
> +/* Get critical temperature callback functions for thermal zone */
> +static int exynos_get_crit_temp(struct thermal_zone_device *thermal,
> + unsigned long *temp)
> +{
> + int ret;
> + /* Panic zone */
> + ret = exynos_get_trip_temp(thermal, GET_TRIP(PANIC_ZONE), temp);
> + return ret;
> +}
> +
> +/* Bind callback functions for thermal zone */
> +static int exynos_bind(struct thermal_zone_device *thermal,
> + struct thermal_cooling_device *cdev)
> +{
> + int ret = 0, i, tab_size, level;
> + struct freq_clip_table *tab_ptr, *clip_data;
> + struct thermal_sensor_conf *data = th_zone->sensor_conf;
> +
> + tab_ptr = (struct freq_clip_table *)data->cooling_data.freq_data;
> + tab_size = data->cooling_data.freq_clip_count;
> +
> + if (tab_ptr == NULL || tab_size == 0)
> + return -EINVAL;
> +
> + /* find the cooling device registered*/
> + for (i = 0; i < th_zone->cool_dev_size; i++)
> + if (cdev == th_zone->cool_dev[i])
> + break;
> +
> + /* No matching cooling device */
> + if (i == th_zone->cool_dev_size)
> + return 0;
> +
> + /* Bind the thermal zone to the cpufreq cooling device */
> + for (i = 0; i < tab_size; i++) {
> + clip_data = (struct freq_clip_table *)&(tab_ptr[i]);
> + level = cpufreq_cooling_get_level(0, clip_data->freq_clip_max);
> + if (level == THERMAL_CSTATE_INVALID)
> + return 0;
> + switch (GET_ZONE(i)) {
> + case MONITOR_ZONE:
> + case WARN_ZONE:
> + if (thermal_zone_bind_cooling_device(thermal, i, cdev,
> + level, 0)) {
> + pr_err("error binding cdev inst %d\n", i);
> + ret = -EINVAL;
> + }
> + th_zone->bind = true;
> + break;
> + default:
> + ret = -EINVAL;
> + }
> + }
> +
> + return ret;
> +}
> +
> +/* Unbind callback functions for thermal zone */
> +static int exynos_unbind(struct thermal_zone_device *thermal,
> + struct thermal_cooling_device *cdev)
> +{
> + int ret = 0, i, tab_size;
> + struct thermal_sensor_conf *data = th_zone->sensor_conf;
> +
> + if (th_zone->bind == false)
> + return 0;
> +
> + tab_size = data->cooling_data.freq_clip_count;
> +
> + if (tab_size == 0)
> + return -EINVAL;
> +
> + /* find the cooling device registered*/
> + for (i = 0; i < th_zone->cool_dev_size; i++)
> + if (cdev == th_zone->cool_dev[i])
> + break;
> +
> + /* No matching cooling device */
> + if (i == th_zone->cool_dev_size)
> + return 0;
> +
> + /* Bind the thermal zone to the cpufreq cooling device */
> + for (i = 0; i < tab_size; i++) {
> + switch (GET_ZONE(i)) {
> + case MONITOR_ZONE:
> + case WARN_ZONE:
> + if (thermal_zone_unbind_cooling_device(thermal, i,
> + cdev)) {
> + pr_err("error unbinding cdev inst=%d\n", i);
> + ret = -EINVAL;
> + }
> + th_zone->bind = false;
> + break;
> + default:
> + ret = -EINVAL;
> + }
> + }
> + return ret;
> +}
> +
> +/* Get temperature callback functions for thermal zone */
> +static int exynos_get_temp(struct thermal_zone_device *thermal,
> + unsigned long *temp)
> +{
> + void *data;
> +
> + if (!th_zone->sensor_conf) {
> + pr_info("Temperature sensor not initialised\n");
> + return -EINVAL;
> + }
> + data = th_zone->sensor_conf->private_data;
> + *temp = th_zone->sensor_conf->read_temperature(data);
> + /* convert the temperature into millicelsius */
> + *temp = *temp * MCELSIUS;
> + return 0;
> +}
> +
> +/* Get temperature callback functions for thermal zone */
> +static int exynos_set_emul_temp(struct thermal_zone_device *thermal,
> + unsigned long temp)
> +{
> + void *data;
> + int ret = -EINVAL;
> +
> + if (!th_zone->sensor_conf) {
> + pr_info("Temperature sensor not initialised\n");
> + return -EINVAL;
> + }
> + data = th_zone->sensor_conf->private_data;
> + if (th_zone->sensor_conf->write_emul_temp)
> + ret = th_zone->sensor_conf->write_emul_temp(data, temp);
> + return ret;
> +}
> +
> +/* Get the temperature trend */
> +static int exynos_get_trend(struct thermal_zone_device *thermal,
> + int trip, enum thermal_trend *trend)
> +{
> + int ret;
> + unsigned long trip_temp;
> +
> + ret = exynos_get_trip_temp(thermal, trip, &trip_temp);
> + if (ret < 0)
> + return ret;
> +
> + if (thermal->temperature >= trip_temp)
> + *trend = THERMAL_TREND_RAISE_FULL;
> + else
> + *trend = THERMAL_TREND_DROP_FULL;
> +
> + return 0;
> +}
> +/* Operation callback functions for thermal zone */
> +static struct thermal_zone_device_ops const exynos_dev_ops = {
> + .bind = exynos_bind,
> + .unbind = exynos_unbind,
> + .get_temp = exynos_get_temp,
> + .set_emul_temp = exynos_set_emul_temp,
> + .get_trend = exynos_get_trend,
> + .get_mode = exynos_get_mode,
> + .set_mode = exynos_set_mode,
> + .get_trip_type = exynos_get_trip_type,
> + .get_trip_temp = exynos_get_trip_temp,
> + .get_crit_temp = exynos_get_crit_temp,
> +};
> +
> +/*
> + * This function may be called from interrupt based temperature sensor
> + * when threshold is changed.
> + */
> +void exynos_report_trigger(void)
> +{
> + unsigned int i;
> + char data[10];
> + char *envp[] = { data, NULL };
> +
> + if (!th_zone || !th_zone->therm_dev)
> + return;
> + if (th_zone->bind == false) {
> + for (i = 0; i < th_zone->cool_dev_size; i++) {
> + if (!th_zone->cool_dev[i])
> + continue;
> + exynos_bind(th_zone->therm_dev,
> + th_zone->cool_dev[i]);
> + }
> + }
> +
> + thermal_zone_device_update(th_zone->therm_dev);
> +
> + mutex_lock(&th_zone->therm_dev->lock);
> + /* Find the level for which trip happened */
> + for (i = 0; i < th_zone->sensor_conf->trip_data.trip_count; i++) {
> + if (th_zone->therm_dev->last_temperature <
> + th_zone->sensor_conf->trip_data.trip_val[i] * MCELSIUS)
> + break;
> + }
> +
> + if (th_zone->mode == THERMAL_DEVICE_ENABLED &&
> + !th_zone->sensor_conf->trip_data.trigger_falling) {
> + if (i > 0)
> + th_zone->therm_dev->polling_delay = ACTIVE_INTERVAL;
> + else
> + th_zone->therm_dev->polling_delay = IDLE_INTERVAL;
> + }
> +
> + snprintf(data, sizeof(data), "%u", i);
> + kobject_uevent_env(&th_zone->therm_dev->device.kobj, KOBJ_CHANGE, envp);
> + mutex_unlock(&th_zone->therm_dev->lock);
> +}
> +
> +/* Register with the in-kernel thermal management */
> +int exynos_register_thermal(struct thermal_sensor_conf *sensor_conf)
> +{
> + int ret;
> + struct cpumask mask_val;
> +
> + if (!sensor_conf || !sensor_conf->read_temperature) {
> + pr_err("Temperature sensor not initialised\n");
> + return -EINVAL;
> + }
> +
> + th_zone = kzalloc(sizeof(struct exynos_thermal_zone), GFP_KERNEL);
> + if (!th_zone)
> + return -ENOMEM;
> +
> + th_zone->sensor_conf = sensor_conf;
> + cpumask_set_cpu(0, &mask_val);
> + th_zone->cool_dev[0] = cpufreq_cooling_register(&mask_val);
> + if (IS_ERR(th_zone->cool_dev[0])) {
> + pr_err("Failed to register cpufreq cooling device\n");
> + ret = -EINVAL;
> + goto err_unregister;
> + }
> + th_zone->cool_dev_size++;
> +
> + th_zone->therm_dev = thermal_zone_device_register(sensor_conf->name,
> + EXYNOS_ZONE_COUNT, 0, NULL, &exynos_dev_ops, NULL, 0,
> + sensor_conf->trip_data.trigger_falling ?
> + 0 : IDLE_INTERVAL);
> +
> + if (IS_ERR(th_zone->therm_dev)) {
> + pr_err("Failed to register thermal zone device\n");
> + ret = PTR_ERR(th_zone->therm_dev);
> + goto err_unregister;
> + }
> + th_zone->mode = THERMAL_DEVICE_ENABLED;
> +
> + pr_info("Exynos: Kernel Thermal management registered\n");
> +
> + return 0;
> +
> +err_unregister:
> + exynos_unregister_thermal();
> + return ret;
> +}
> +
> +/* Un-Register with the in-kernel thermal management */
> +void exynos_unregister_thermal(void)
> +{
> + int i;
> +
> + if (!th_zone)
> + return;
> +
> + if (th_zone->therm_dev)
> + thermal_zone_device_unregister(th_zone->therm_dev);
> +
> + for (i = 0; i < th_zone->cool_dev_size; i++) {
> + if (th_zone->cool_dev[i])
> + cpufreq_cooling_unregister(th_zone->cool_dev[i]);
> + }
> +
> + kfree(th_zone);
> + pr_info("Exynos: Kernel Thermal management unregistered\n");
> +}
> diff --git a/drivers/thermal/samsung/exynos_thermal_common.h b/drivers/thermal/samsung/exynos_thermal_common.h
> new file mode 100644
> index 0000000..165401f
> --- /dev/null
> +++ b/drivers/thermal/samsung/exynos_thermal_common.h
> @@ -0,0 +1,71 @@
> +/*
> + * exynos_thermal_common.h - Samsung EXYNOS common header file
> + *
> + * Copyright (C) 2013 Samsung Electronics
> + * Amit Daniel Kachhap <amit.daniel@xxxxxxxxxxx>
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License as published by
> + * the Free Software Foundation; either version 2 of the License, or
> + * (at your option) any later version.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + *
> + * You should have received a copy of the GNU General Public License
> + * along with this program; if not, write to the Free Software
> + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
> + *
> + */
> +
> +#ifndef _LINUX_EXYNOS_THERMAL_COMMON_H
> +#define _LINUX_EXYNOS_THERMAL_COMMON_H
> +
> +/* In-kernel thermal framework related macros & definations */
> +#define SENSOR_NAME_LEN 16
> +#define MAX_TRIP_COUNT 8
> +#define MAX_COOLING_DEVICE 4
> +#define MAX_THRESHOLD_LEVS 4
> +
> +#define ACTIVE_INTERVAL 500
> +#define IDLE_INTERVAL 10000
> +#define MCELSIUS 1000
> +
> +/* CPU Zone information */
> +#define PANIC_ZONE 4
> +#define WARN_ZONE 3
> +#define MONITOR_ZONE 2
> +#define SAFE_ZONE 1
> +
> +#define GET_ZONE(trip) (trip + 2)
> +#define GET_TRIP(zone) (zone - 2)
> +
> +#define EXYNOS_ZONE_COUNT 3
> +
> +struct thermal_trip_point_conf {
> + int trip_val[MAX_TRIP_COUNT];
> + int trip_count;
> + u8 trigger_falling;
> +};
> +
> +struct thermal_cooling_conf {
> + struct freq_clip_table freq_data[MAX_TRIP_COUNT];
> + int freq_clip_count;
> +};
> +
> +struct thermal_sensor_conf {
> + char name[SENSOR_NAME_LEN];
> + int (*read_temperature)(void *data);
> + int (*write_emul_temp)(void *drv_data, unsigned long temp);
> + struct thermal_trip_point_conf trip_data;
> + struct thermal_cooling_conf cooling_data;
> + void *private_data;
> +};
> +
> +/*Functions used exynos based thermal sensor driver*/
> +void exynos_unregister_thermal(void);
> +int exynos_register_thermal(struct thermal_sensor_conf *sensor_conf);
> +void exynos_report_trigger(void);
> +#endif /* _LINUX_EXYNOS_THERMAL_COMMON_H */


--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/