[GIT] [3.10] MFD pull request

From: Samuel Ortiz
Date: Sun May 05 2013 - 19:15:36 EST


Hi Linus,

This is the MFD pull request for the 3.10 merge window. There is one merge
conflict with your tree, and I fixed it for reference in my mfd-3.10-merge
branch.

For 3.10 we have a few new MFD drivers for:

- The ChromeOS embedded controller which provides keyboard, battery and power
management services. This controller is accessible through i2c or SPI.

- Silicon Laboratories 476x controller, providing access to their FM chipset
and their audio codec.

- Realtek's RTS5249, a memory stick, MMC and SD/SDIO PCI based reader.

- Nokia's Tahvo power button and watchdog device. This device is very similar
to Retu and is thus supported by the same code base.

- STMicroelectronics STMPE1801, a keyboard and GPIO controller supported by
the stmpe driver.

- ST-Ericsson AB8540 and AB8505 power management and voltage converter
controllers through the existing ab8500 code.

Some other drivers got cleaned up or improved. In particular:

- The Linaro/STE guys got the ab8500 driver in sync with their internal code
through a series of optimizations, fixes and improvements.

- The AS3711 and OMAP USB drivers now have DT support.

- The arizona clock and interrupt handling code got improved.

- The wm5102 register patch and boot mechanism also got improved.

The following changes since commit 07961ac7c0ee8b546658717034fe692fd12eefa9:

Linux 3.9-rc5 (2013-03-31 15:12:43 -0700)

are available in the git repository at:

git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-next.git tags/mfd-3.10-1

for you to fetch changes up to 99f4c6b66a9ae362d21e6df95d04bc74e04d285e:

mfd: si476x: Don't use 0bNNN (2013-04-26 17:23:30 +0200)

----------------------------------------------------------------
Aaro Koskinen (1):
mfd: retu: Add Tahvo support

Alessandro Rubini (1):
mfd: sta2x11: Build warning fix

Alexander Shiyan (4):
mfd: syscon: Removed unneeded field "dev" from private driver structure
mfd: syscon: Add non-DT support
of: Add stub of_get_parent for non-OF builds
mfd: syscon: Fix warnings when printing resource_size_t

Andrew Morton (1):
mfd: si476x: Don't use 0bNNN

Andrey Smirnov (4):
mfd: si476x: Add commands abstraction layer
mfd: si476x: Add the bulk of the core driver
mfd: si476x: Add chip properties handling code
mfd: si476x: Add header files and Kbuild plumbing

Arnd Bergmann (2):
ARM: ux500: split out prcmu initialization
mfd: ab8500: Export ab8500_gpadc_sw_hw_convert properly

Ashish Jangam (1):
mfd: da9055: Change irq state to default

Charles Keepax (7):
mfd: wm5102: Manually apply register patch
mfd: arizona: Factor out register polling
mfd: arizona: Add a hardware patch mechanism
mfd: wm5102: Deactivate standard boot sequence
mfd: wm5102: Update defaults to match patch
mfd: arizona: Wait for internal clocks to startup after reset
mfd: wm5102: Don't wait for boot when boot sequencer is disabled

Daniel WILLERUD (1):
mfd: ab8500-gpadc: Implemented suspend/resume

Dariusz Szymczak (1):
mfd: ab8500-core: Hierarchical interrupt registers

David Rientjes (1):
mfd: cros_ec: Add MFD_CORE dependency

Fabio Baltieri (2):
mfd: ab8500-core: Ignore masked out interrupts
mfd: ab8500-core: Add of_compatilbe property for ab8500-usb

Gabriel Fernandez (2):
mfd: stmpe: DT: Enable no-irq mode configuration
mfd: stmpe: DT: Add stmpe-i2c dt alias to get id device

Guennadi Liakhovetski (1):
mfd: as3711: Add OF support

Hakan Berg (3):
ab8500-btemp: Filter btemp readings
ab8500-fg: Allow capacity to raise from 1% when charging
ab8500-charger: Add AB8505_USB_LINK_STATUS

Hans Verkuil (1):
mfd: si476x: Fix i2c warning

Ian Lartey (1):
mfd: palmas: is_palmas_charger needed by multiple drivers

J Keerthy (1):
mfd: palmas: Change the DT node property names to follow the convention

Jean-Nicolas Graux (1):
mfd: support stmpe1801 18 bits enhanced port expander

Jingoo Han (19):
mfd: ab3100-otp: use module_platform_driver_probe()
mfd: htc-pasic3: use module_platform_driver_probe()
mfd: davinci_voicecodec: use module_platform_driver_probe()
mfd: wm8994: Silence bogus warning in wm8994_device_init()
mfd: 88pm860x: Drop devm_kfree of devm_kzalloc'd data
mfd: lm3533: Use devm_gpio_request_one()
mfd: intel_msic: Use devm_gpio_request_one()
mfd: omap-usb-host: Use devm_gpio_request_one()
mfd: aat2870: Use use devm_*() functions
mfd: twl6040: Use devm_*() functions
mfd: ezx-pcap: Use devm_*() functions
mfd: da903x: Use devm_*() functions
mfd: tc3589x: Use devm_*() functions
mfd: wm831x: Use spi_get_drvdata() and spi_set_drvdata()
mfd: da9052: Use spi_get_drvdata() and spi_set_drvdata()
mfd: ezx-pcap: Use spi_get_drvdata() and spi_set_drvdata()
mfd: mc13xxx: Use spi_get_drvdata() and spi_set_drvdata()
mfd: arizona: Use spi_get_drvdata()
mfd: stmpe: Use spi_get_drvdata()

Jiri Slaby (1):
MFD: rtsx_pcr: Fix probe fail path

Jonas Aaberg (3):
mfd: ab8500-gpadc: Reread on failure
mfd: ab8500-debug: Better error handling on crash
mfd: ab8500-debug: Add wake-up info

Lars-Peter Clausen (1):
mfd: adp5520: Restore mode bits on resume

Laxman Dewangan (1):
mfd: palmas: Initialise client->of_node for dummy created client

Lee Jones (35):
mfd: ab8500-gpadc: Add gpadc hw conversion
mfd: ab8500-core: APE Interrupts are not cleared
mfd: ab8500-debug: Function to save all ABB registers to mem
mfd: ab8500-core: Add ADC support for ab8540
mfd: ab8500-core: Rework MFD sub-device initialisation structures
mfd: ab8500-core: Add Interrupt support for ab8540
mfd: ab8500-debugfs: Add tests for ab8540 based platform initialisations
mfd: ab8500-debug: Add support for ab8505 and ab9540
mfd: ab8500-sysctrl: Add new reset function
mfd: ab8500-gpadc: Add support for the AB8540
mfd: ab8500-debug: Add support for the AB8540
mfd: ab8500-gpadc: Optimise GPADC driver
mfd: ab8500-core: Add additional resources to ab8505_iddet_resources
mfd: ab8500-debugfs: Dump sim registers
mfd: ab8500-debug: Add ADC input channel usb_id in debugfs
mfd: ab8500-debugfs: Change AB8500 debug permissions
mfd: ab8500-debug: Add register map for ab8540.
mfd: ab8500-debugfs: Trivially beautify the debugfs driver
pm2301_charger: Remove __exit, __init and __devexit_p()
abx500-chargalg: Store the AB8500 MFD parent device for platform differentiation
ab8500-fg: Add power cut feature for ab8505 and ab8540
ab8500-charger: Trivial coding style changes
ab8500-bm: Quick re-attach charging behaviour
ab8500-bm: Charge only mode fixes for the ab9540
ab8500_charger: Prevent auto drop of VBUS
ab8500-bm: Add usb power path support
ab8500-bm: Add support for the new ab8540 platform
abx500-chargalg: Prevent the watchdog from being kicked twice
ab8500-chargalg: Use hrtimer
pm2301-charger: Add pm_runtime_resume & pm_runtime_suspend
ab8500-charger: Remove duplicate code
abx500-chargalg: Add charging current step interface
ab8500-charger: Do not use [delayed_]work_pending()
mfd: db8500-prcmu: Return early if the TCPM cannot be located
mfd: db8500-prcmu: Support platform dependant device selection

Linus Walleij (6):
mfd: ab8500-debug: Add explicit dependencies
mfd: abx500: Move the AB8500 Kconfig fragment
mfd: prcmu: pass a base and size with the early initcall
mfd: db8500-prcmu: get base address from resource
ARM: ux500: move PM-related PRCMU functions to machine
mfd: db8500-prcmu: drop unused includes

M BenZoubeir (1):
pm2301-charger: Adjust interrupt handler behavior

Marcus Cooper (4):
pm2301-charger: Always compile the PM2301 Charger driver with AB8500 Battery Mgnt
ab8500-charger: Use USBLink1Status Register
ab8500-charger: Add UsbLineCtrl2 reference
ab8500-bm: Trivially fix up some incorrect and out-of-date comments

Marcus Danielsson (1):
mfd: ab8500-sysctrl: Error check clean up

Marek Vasut (1):
mfd: ucb1400: Pass ucb1400-gpio data through ac97 bus

Mark Brown (17):
mfd: arizona: Disable all wake sources by default
mfd: arizona: Clean up on failed runtime resume
mfd: arizona: Clarify error message for failed primary IRQ request
mfd: arizona: Basic support for edge triggered IRQs
mfd: arizona: Allow GPIO to be specified for IRQ line
mfd: arizona: Try to use interrupt flags from interrupt controller
mfd: arizona: Support configuring MICBIASes into bypass mode
mfd: wm5102: Update patch for latest evaluation
mfd: arizona: Fully support the use of MCLK1 as the 32kHz clock source
mfd: arizona: Unconditionally enable 32kHz clock
mfd: wm5102: Only use the lowest three bits of device revision
mfd: arizona: Hold device in reset while ramping supplies
mfd: arizona: Define additional FLL control registers
mfd: wm5102: Map in additional FLL control registers
mfd: wm8994: Don't use system PM operations
mfd: wm8994: Add device ID data to WM8994 OF device IDs
mfd: wm8994: Add some OF properties

Martin Bergstrom (1):
ab8500-fg: Report unscaled capacity

Mattias Wallin (2):
mfd: ab8500-debug: Print banks in hex
mfd: ab8500-core: Show turn on status at boot

Michal Marek (1):
input: Export matrix_keypad_parse_of_params()

Mustapha Ben Zoubeir (1):
pm2301-charger: Resolve I2C detection problem on ab9540

Pali Rohár (2):
mfd: twl4030-madc: Add support for raw value in twl4030_madc_conversion
power: rx51_battery: Fix reporting correct values

Paul Bolle (2):
mfd: da9055: Drop "select PMIC_DA9055"
mfd: Remove twelve unused Kconfig symbols

Pawel Moll (2):
mfd: vexpress: Give the "leds-gpio" device a real parent
mfd: vexpress: Handle pending config transactions

Per Forlin (1):
pm2301-charger: Force main charger detect

Rabin Vincent (2):
mfd: ab8500-sysctrl: AB8505 doesn't have SYSCLKREQ5..8
ab8500-charger: Run detect workaround only on AB8500

Rajkumar Kasirajan (2):
mfd: ab8500-sysctrl: Update correct turn on status
pm2301-charger: Enable SW EOC control on the ab9540

Rhyland Klein (3):
mfd: tps65090: Fix enum in header file
mfd: tps65090: Add resources for charger
mfd: tps65090: Add compatible string for charger subnode

Roger Quadros (5):
mfd: omap-usb-host: Update nports in platform_data
mfd: omap-usb-tll: Move configuration code to omap_tll_init()
mfd: omap-usb-tll: Add device tree support and binding information
mfd: omap-usb-host: Remove PHY reset handling code
mfd: omap-usb-host: Add device tree support and binding information

Rupesh Kumar (8):
pm2301-charger: Support for over voltage protection on the ab9540
pm2301-charger: Die temp thermal protection
pm2301-charger: Wake system when ext charger is plugged-in
ab8500-btemp: Defer btemp filtering while initialising
pm2301-charger: Removed unused code from PM2301 driver
pm2301-charger: Charging LED control for pm2301
pm2301-charger: Wake device on register access
pm2301-charger: Reference put missing after access

Sachin Kamat (4):
mfd: adp5520: Use module_i2c_driver()
mfd: max77686: Use NULL instead of 0
mfd: omap-usb-host: Convert to devm_ioremap_resource()
mfd: omap-usb-tll: Convert to devm_ioremap_resource()

Samuel Ortiz (5):
mfd: cros_ec: Export needed symbols for the i2c and spi modules
mfd: cros_ec_spi: Warnings fix
Merge branch 'for-mfd-and-power' of git://git.linaro.org/people/ljones/linux-3.0-ux500
Merge tag 'ux500-multiplatform-mfd' of git://git.kernel.org/.../linusw/linux-stericsson
mfd: Kconfig alphabetical re-ordering

Simon Glass (6):
mfd: Add ChromeOS EC messages header
mfd: Add ChromeOS EC implementation
mfd: Add ChromeOS EC I2C driver
mfd: Add ChromeOS EC SPI driver
input: matrix-keymap: Add function to read the new DT binding
input: Add ChromeOS EC keyboard driver

Sylwester Nawrocki (1):
mfd: syscon: Add missing struct device_node declaration

Ulf Hansson (2):
mfd: ab8500-core: Add abx500-clk as an mfd child device
mfd: ab8500: sysctrl: Initialize driver at arch_initcall

Wei WANG (1):
mfd: rtsx: Support RTS5249

Yang QU (1):
ab8500-charger: Add backup battery charge voltages on the ab8540

lme00437 (2):
pm2301-charger: lpn pin used only in C2C boards
ab8500-fg: Change current calculation

srinidhi kasagar (2):
mfd: ab8500-debug: Convert to kstrtoul_from_user
abx500-chargalg: Use module_platform_driver() rather

.../devicetree/bindings/input/cros-ec-keyb.txt | 72 +
Documentation/devicetree/bindings/mfd/as3711.txt | 73 +
Documentation/devicetree/bindings/mfd/cros-ec.txt | 56 +
.../devicetree/bindings/mfd/omap-usb-host.txt | 80 +
.../devicetree/bindings/mfd/omap-usb-tll.txt | 17 +
Documentation/devicetree/bindings/sound/wm8994.txt | 58 +-
arch/arm/mach-imx/Kconfig | 2 -
arch/arm/mach-s3c64xx/Kconfig | 3 -
arch/arm/mach-s3c64xx/mach-crag6410-module.c | 4 +-
arch/arm/mach-ux500/Makefile | 2 +-
arch/arm/mach-ux500/board-mop500.c | 58 -
arch/arm/mach-ux500/cpu-db8500.c | 2 -
arch/arm/mach-ux500/cpu.c | 21 +-
arch/arm/mach-ux500/cpuidle.c | 3 +-
arch/arm/mach-ux500/devices-db8500.c | 2 +
arch/arm/mach-ux500/include/mach/hardware.h | 2 -
arch/arm/mach-ux500/include/mach/irqs-db8500.h | 25 -
arch/arm/mach-ux500/pm.c | 167 ++
drivers/gpio/gpio-ucb1400.c | 19 +-
drivers/input/keyboard/Kconfig | 12 +
drivers/input/keyboard/Makefile | 1 +
drivers/input/keyboard/cros_ec_keyb.c | 334 +++
drivers/input/keyboard/lpc32xx-keys.c | 11 +-
drivers/input/keyboard/omap4-keypad.c | 16 +-
drivers/input/keyboard/tca8418_keypad.c | 7 +-
drivers/input/matrix-keymap.c | 20 +
drivers/mfd/88pm860x-core.c | 12 +-
drivers/mfd/Kconfig | 1620 ++++++-------
drivers/mfd/Makefile | 9 +-
drivers/mfd/aat2870-core.c | 20 +-
drivers/mfd/ab3100-otp.c | 14 +-
drivers/mfd/ab8500-core.c | 572 +++--
drivers/mfd/ab8500-debugfs.c | 2559 +++++++++++++++-----
drivers/mfd/ab8500-gpadc.c | 561 ++++-
drivers/mfd/ab8500-sysctrl.c | 100 +-
drivers/mfd/adp5520.c | 20 +-
drivers/mfd/arizona-core.c | 267 +-
drivers/mfd/arizona-irq.c | 106 +-
drivers/mfd/arizona-spi.c | 2 +-
drivers/mfd/as3711.c | 27 +-
drivers/mfd/cros_ec.c | 196 ++
drivers/mfd/cros_ec_i2c.c | 201 ++
drivers/mfd/cros_ec_spi.c | 375 +++
drivers/mfd/da903x.c | 19 +-
drivers/mfd/da9052-spi.c | 4 +-
drivers/mfd/da9055-core.c | 2 +-
drivers/mfd/davinci_voicecodec.c | 12 +-
drivers/mfd/db8500-prcmu.c | 388 +--
drivers/mfd/dbx500-prcmu-regs.h | 204 +-
drivers/mfd/ezx-pcap.c | 21 +-
drivers/mfd/htc-pasic3.c | 13 +-
drivers/mfd/intel_msic.c | 10 +-
drivers/mfd/lm3533-core.c | 8 +-
drivers/mfd/max77686.c | 2 +-
drivers/mfd/mc13xxx-spi.c | 6 +-
drivers/mfd/omap-usb-host.c | 209 +-
drivers/mfd/omap-usb-tll.c | 219 +-
drivers/mfd/omap-usb.h | 5 +-
drivers/mfd/palmas.c | 7 +-
drivers/mfd/retu-mfd.c | 85 +-
drivers/mfd/rts5249.c | 241 ++
drivers/mfd/rtsx_pcr.c | 11 +-
drivers/mfd/rtsx_pcr.h | 1 +
drivers/mfd/si476x-cmd.c | 1553 ++++++++++++
drivers/mfd/si476x-i2c.c | 886 +++++++
drivers/mfd/si476x-prop.c | 241 ++
drivers/mfd/sta2x11-mfd.c | 11 -
drivers/mfd/stmpe-i2c.c | 1 +
drivers/mfd/stmpe-spi.c | 2 +-
drivers/mfd/stmpe.c | 105 +-
drivers/mfd/stmpe.h | 49 +
drivers/mfd/syscon.c | 80 +-
drivers/mfd/tc3589x.c | 21 +-
drivers/mfd/tps65090.c | 11 +
drivers/mfd/twl4030-madc.c | 14 +-
drivers/mfd/twl6040.c | 31 +-
drivers/mfd/ucb1400_core.c | 5 +
drivers/mfd/vexpress-config.c | 35 +-
drivers/mfd/vexpress-sysreg.c | 4 +-
drivers/mfd/wm5102-tables.c | 64 +-
drivers/mfd/wm831x-spi.c | 6 +-
drivers/mfd/wm8994-core.c | 88 +-
drivers/power/Kconfig | 7 -
drivers/power/Makefile | 3 +-
drivers/power/ab8500_bmdata.c | 96 +-
drivers/power/ab8500_btemp.c | 75 +-
drivers/power/ab8500_charger.c | 699 ++++--
drivers/power/ab8500_fg.c | 497 +++-
drivers/power/abx500_chargalg.c | 455 +++-
drivers/power/pm2301_charger.c | 371 ++-
drivers/power/pm2301_charger.h | 23 +-
drivers/power/rx51_battery.c | 1 +
include/linux/i2c/twl4030-madc.h | 2 +
include/linux/input/matrix_keypad.h | 19 +
include/linux/mfd/abx500.h | 21 +-
include/linux/mfd/abx500/ab8500-bm.h | 60 +-
include/linux/mfd/abx500/ab8500-gpadc.h | 74 +-
include/linux/mfd/abx500/ab8500-sysctrl.h | 6 +
include/linux/mfd/abx500/ab8500.h | 3 +
include/linux/mfd/abx500/ux500_chargalg.h | 7 +
include/linux/mfd/arizona/pdata.h | 7 +-
include/linux/mfd/arizona/registers.h | 40 +
include/linux/mfd/cros_ec.h | 170 ++
include/linux/mfd/cros_ec_commands.h | 1369 +++++++++++
include/linux/mfd/db8500-prcmu.h | 10 +-
include/linux/mfd/dbx500-prcmu.h | 38 +-
include/linux/mfd/palmas.h | 12 +-
include/linux/mfd/retu.h | 8 +-
include/linux/mfd/rtsx_pci.h | 36 +
include/linux/mfd/si476x-core.h | 533 ++++
include/linux/mfd/si476x-platform.h | 267 ++
include/linux/mfd/si476x-reports.h | 163 ++
include/linux/mfd/stmpe.h | 3 +
include/linux/mfd/syscon.h | 3 +
include/linux/mfd/tps65090.h | 1 +
include/linux/of.h | 5 +
include/linux/platform_data/arm-ux500-pm.h | 21 +
include/linux/pm2301_charger.h | 2 +-
include/linux/ucb1400.h | 18 +-
119 files changed, 14380 insertions(+), 3147 deletions(-)
create mode 100644 Documentation/devicetree/bindings/input/cros-ec-keyb.txt
create mode 100644 Documentation/devicetree/bindings/mfd/as3711.txt
create mode 100644 Documentation/devicetree/bindings/mfd/cros-ec.txt
create mode 100644 Documentation/devicetree/bindings/mfd/omap-usb-host.txt
create mode 100644 Documentation/devicetree/bindings/mfd/omap-usb-tll.txt
create mode 100644 arch/arm/mach-ux500/pm.c
create mode 100644 drivers/input/keyboard/cros_ec_keyb.c
create mode 100644 drivers/mfd/cros_ec.c
create mode 100644 drivers/mfd/cros_ec_i2c.c
create mode 100644 drivers/mfd/cros_ec_spi.c
create mode 100644 drivers/mfd/rts5249.c
create mode 100644 drivers/mfd/si476x-cmd.c
create mode 100644 drivers/mfd/si476x-i2c.c
create mode 100644 drivers/mfd/si476x-prop.c
create mode 100644 include/linux/mfd/cros_ec.h
create mode 100644 include/linux/mfd/cros_ec_commands.h
create mode 100644 include/linux/mfd/si476x-core.h
create mode 100644 include/linux/mfd/si476x-platform.h
create mode 100644 include/linux/mfd/si476x-reports.h
create mode 100644 include/linux/platform_data/arm-ux500-pm.h
--
Intel Open Source Technology Centre
http://oss.intel.com/
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/