[PATCH 2/2] xhci: Rename SEGMENT_SIZE and SEGMENT_SHIFT as theformer is used in a.out.h

From: David Howells
Date: Thu Mar 28 2013 - 14:48:45 EST


Rename SEGMENT_SIZE and SEGMENT_SHIFT as the former is used in a.out.h.

Signed-off-by: David Howells <dhowells@xxxxxxxxxx>
cc: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
cc: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
cc: linux-usb@xxxxxxxxxxxxxxx
---

drivers/usb/host/xhci-mem.c | 16 ++++++++--------
drivers/usb/host/xhci.h | 4 ++--
2 files changed, 10 insertions(+), 10 deletions(-)

diff --git a/drivers/usb/host/xhci-mem.c b/drivers/usb/host/xhci-mem.c
index 35616ff..e11e2af 100644
--- a/drivers/usb/host/xhci-mem.c
+++ b/drivers/usb/host/xhci-mem.c
@@ -51,7 +51,7 @@ static struct xhci_segment *xhci_segment_alloc(struct xhci_hcd *xhci,
return NULL;
}

- memset(seg->trbs, 0, SEGMENT_SIZE);
+ memset(seg->trbs, 0, TRB_SEGMENT_SIZE);
/* If the cycle state is 0, set the cycle bit to 1 for all the TRBs */
if (cycle_state == 0) {
for (i = 0; i < TRBS_PER_SEGMENT; i++)
@@ -467,7 +467,7 @@ struct xhci_ring *xhci_dma_to_transfer_ring(
{
if (ep->ep_state & EP_HAS_STREAMS)
return radix_tree_lookup(&ep->stream_info->trb_address_map,
- address >> SEGMENT_SHIFT);
+ address >> TRB_SEGMENT_SHIFT);
return ep->ring;
}

@@ -478,7 +478,7 @@ static struct xhci_ring *dma_to_stream_ring(
u64 address)
{
return radix_tree_lookup(&stream_info->trb_address_map,
- address >> SEGMENT_SHIFT);
+ address >> TRB_SEGMENT_SHIFT);
}
#endif /* CONFIG_USB_XHCI_HCD_DEBUGGING */

@@ -514,7 +514,7 @@ static int xhci_test_radix_tree(struct xhci_hcd *xhci,

cur_ring = stream_info->stream_rings[cur_stream];
for (addr = cur_ring->first_seg->dma;
- addr < cur_ring->first_seg->dma + SEGMENT_SIZE;
+ addr < cur_ring->first_seg->dma + TRB_SEGMENT_SIZE;
addr += trb_size) {
mapped_ring = dma_to_stream_ring(stream_info, addr);
if (cur_ring != mapped_ring) {
@@ -662,7 +662,7 @@ struct xhci_stream_info *xhci_alloc_stream_info(struct xhci_hcd *xhci,
cur_stream, (unsigned long long) addr);

key = (unsigned long)
- (cur_ring->first_seg->dma >> SEGMENT_SHIFT);
+ (cur_ring->first_seg->dma >> TRB_SEGMENT_SHIFT);
ret = radix_tree_insert(&stream_info->trb_address_map,
key, cur_ring);
if (ret) {
@@ -693,7 +693,7 @@ cleanup_rings:
if (cur_ring) {
addr = cur_ring->first_seg->dma;
radix_tree_delete(&stream_info->trb_address_map,
- addr >> SEGMENT_SHIFT);
+ addr >> TRB_SEGMENT_SHIFT);
xhci_ring_free(xhci, cur_ring);
stream_info->stream_rings[cur_stream] = NULL;
}
@@ -764,7 +764,7 @@ void xhci_free_stream_info(struct xhci_hcd *xhci,
if (cur_ring) {
addr = cur_ring->first_seg->dma;
radix_tree_delete(&stream_info->trb_address_map,
- addr >> SEGMENT_SHIFT);
+ addr >> TRB_SEGMENT_SHIFT);
xhci_ring_free(xhci, cur_ring);
stream_info->stream_rings[cur_stream] = NULL;
}
@@ -2325,7 +2325,7 @@ int xhci_mem_init(struct xhci_hcd *xhci, gfp_t flags)
* so we pick the greater alignment need.
*/
xhci->segment_pool = dma_pool_create("xHCI ring segments", dev,
- SEGMENT_SIZE, 64, xhci->page_size);
+ TRB_SEGMENT_SIZE, 64, xhci->page_size);

/* See Table 46 and Note on Figure 55 */
xhci->device_pool = dma_pool_create("xHCI input/output contexts", dev,
diff --git a/drivers/usb/host/xhci.h b/drivers/usb/host/xhci.h
index 558ba50..6bf2257 100644
--- a/drivers/usb/host/xhci.h
+++ b/drivers/usb/host/xhci.h
@@ -1234,8 +1234,8 @@ union xhci_trb {
#define TRBS_PER_SEGMENT 64
/* Allow two commands + a link TRB, along with any reserved command TRBs */
#define MAX_RSVD_CMD_TRBS (TRBS_PER_SEGMENT - 3)
-#define SEGMENT_SIZE (TRBS_PER_SEGMENT*16)
-#define SEGMENT_SHIFT (ilog2(SEGMENT_SIZE))
+#define TRB_SEGMENT_SIZE (TRBS_PER_SEGMENT*16)
+#define TRB_SEGMENT_SHIFT (ilog2(TRB_SEGMENT_SIZE))
/* TRB buffer pointers can't cross 64KB boundaries */
#define TRB_MAX_BUFF_SHIFT 16
#define TRB_MAX_BUFF_SIZE (1 << TRB_MAX_BUFF_SHIFT)

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/