Re: [PATCH v3] watchdog: Add Broadcom BCM2835 watchdog timer driver

[Stephen Warren]

On 03/26/2013 11:50 AM, Lubomir Rintel wrote:
> This adds a driver for watchdog timer hardware present on Broadcom BCM2835 SoC,
> used in Raspberry Pi and Roku 2 devices.

Since this patch defines a new DT binding, you should send it to
devicetree-discuss@xxxxxxxxxxxxxxxx too.

> diff --git a/drivers/watchdog/bcm2835_wdt.c b/drivers/watchdog/bcm2835_wdt.c

> +/*
> + * Watchdog driver for Broadcom BCM2835
> + *
> + * Interface to the Broadcom BCM2835 watchdog timer hardware is based on
> + * "bcm2708_wdog" driver written by Luke Diamand that was obtained from branch
> + * "rpi-3.6.y" of git://github.com/raspberrypi/linux.git

I see that the patch isn't S-o-b Luke in the downstream kernel. However,
it is S-o-b Dom Cobley (popcornmix), and they both work for Broadcom, so
I think that's OK.

> +static int bcm2835_wdt_probe(struct platform_device *pdev)
> +{
> +	struct device *dev = &pdev->dev;
> +	struct device_node *np = dev->of_node;
> +	struct bcm2835_wdt *wdt;
> +	int err;
> +
> +	wdt = devm_kzalloc(dev, sizeof(struct bcm2835_wdt), GFP_KERNEL);
> +	if (!wdt) {
> +		dev_err(dev, "Failed to allocate memory for watchdog device");
> +		return -ENOMEM;
> +	}
> +
> +	spin_lock_init(&wdt->lock);
> +
> +	wdt->base = of_iomap(np, 0);
> +	if (!wdt->base) {
> +		dev_err(dev, "Failed to remap watchdog regs");
> +		return -ENODEV;
> +	}
> +
> +	platform_set_drvdata(pdev, wdt);
> +	watchdog_set_drvdata(&bcm2835_wdt_wdd, wdt);

Do you really need both of those? I would have thought just one would
have been enough.

I'd be tempted to put the platform_set_drvdata() call right after the
devm_kzalloc() of wdt, but it's not a big deal either way.
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/