Re: BUG: soft lockup when recording audio on MX28EVK with ASoC sgtl5000

[Hector Palacios]

Hi Fabio,

On 03/26/2013 12:15 AM, Fabio Estevam wrote:
> Hector,
>
> On Mon, Mar 25, 2013 at 4:31 PM, Fabio Estevam <festevam@xxxxxxxxx> wrote:
> > Hi Hector,
> >
> > On Mon, Mar 25, 2013 at 7:52 AM, Hector Palacios
> > <hector.palacios@xxxxxxxx> wrote:
> > > Hello,
> > >
> > > I just tried recording audio on Freescale's MX28EVK that uses ASoC sgtl5000
> > > (kernel v3.8) with:
> > >
> > >          arecord -M -f cd sound.wav --duration 10
> > >
> > > and got a scheduler message:
> > >
> > > [  789.041847] [sched_delayed] sched: RT throttling activated
> >
> > I have just tested arecord on 3.8,4 and I haven't seen the 'soft lockup' bug.
> >
> > However, I see that mxs saif gets busy after the record and any
> > attempt to do an 'aplay' after the first arecord fails.
> >
> > With the attached patch applied I am able to do arecord/aplay sequence
> > several times.
> >
> > I don't have a cable handy here to actually test if the sound is
> > recorded properly or not.
> >
> > Could you please test it against 3.8.4?
>
> I managed to test arecord and it works with the following as follows:
>
> 1. Run alsamixer and select LINE_IN in the Capture element
>
> 2. Record with the following command line:
>
> arecord -D hw:0,1 -d 10 -f S16_LE -r 44100 -c  test.wav

This command works on v3.8 even without your patch. I can arecord/aplay several times 
without problems.

With my original command 'arecord [-M] -f cd sound.wav --duration 10', the soft lockup 
appears both in v3.8 and v3.8.4 with and without your patch. So it looks like the 
patch does not help here.

Regards,
--
HÃctor Palacios
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/