Re: [PATCH] ACPI / PM: Fix potential problem in acpi_device_get_power()

[Rafael J. Wysocki]

On Monday, March 25, 2013 04:01:35 PM Aaron Lu wrote:
> On 03/24/2013 07:57 AM, Rafael J. Wysocki wrote:
> > From: Rafael J. Wysocki <rafael.j.wysocki@xxxxxxxxx>
> > 
> > Theoretically, in some situations acpi_device_get_power() may return
> > an incorrect result, because the settings of the power resources
> > depended on by the device may indicate a power state shallower than
> > the actual power state of the device.
> > 
> > Say that two devices, A and B, depend on two power resources, X and
> > Y, in such a way that _PR0 for both A and B list both X and Y and
> > _PR3 for both A and B list power resource Y alone.  Also suppose
> > that _PS0 and _PS3 are present for both A and B.  Then, if devices
> > A and B are initially in D0, power resources X and Y are initially
> > "on" and their reference counters are equal to 2.  To put device A
> > into power state D3hot the kernel will decrement the reference
> > counter of power resource X, but that power resource won't be turned
> > off, because it is still in use by device B (its reference counter is
> > equal to 1).  Next, _PS3 will be executed for device A.  Afterward
> > the configuration of the power resources will indicate that device
> > A is in power state D0 (both X and Y are "on"), but in fact it is
> > in D3hot (because _PS3 has been executed for it).
> 
> I'm not sure if D3hot is correct here, since the power resource X is
> still on?

I believe so.  We have followed the procedure to put the device into D3hot.
If _PS3 were not executed, that would be moot, but then arguably _PSC should
not return 3.

> I agree that, at least from OSPM's perspective, D3hot is better than D0
> here.

Yes, it is.

Thanks,
Rafael


> > In that situation, if acpi_device_get_power() is called to get the
> > power state of device A, it will first execute _PSC for it which
> > should return 3.  That will cause acpi_device_get_power() to run
> > acpi_power_get_inferred_state() for device A and the resultant power
> > state will be D0, which is incorrect.
> > 
> > To fix that change acpi_device_get_power() to first execute
> > acpi_power_get_inferred_state() for the given device (if it
> > depends on power resources) and to evaluate _PSC for it subsequently,
> > so that the result inferred from the power resources configuration
> > can be amended by the _PSC return value.
> > 
> > Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@xxxxxxxxx>
> > ---
> >  drivers/acpi/device_pm.c |   39 ++++++++++++++++++++++++---------------
> >  1 file changed, 24 insertions(+), 15 deletions(-)
> > 
> > Index: linux-pm/drivers/acpi/device_pm.c
> > ===================================================================
> > --- linux-pm.orig/drivers/acpi/device_pm.c
> > +++ linux-pm/drivers/acpi/device_pm.c
> > @@ -145,27 +145,36 @@ int acpi_device_get_power(struct acpi_de
> >  	}
> >  
> >  	/*
> > -	 * Get the device's power state either directly (via _PSC) or
> > -	 * indirectly (via power resources).
> > +	 * Get the device's power state from power resources settings and _PSC,
> > +	 * if available.
> >  	 */
> > +	if (device->power.flags.power_resources) {
> > +		int error = acpi_power_get_inferred_state(device, &result);
> > +		if (error)
> > +			return error;
> > +	}
> >  	if (device->power.flags.explicit_get) {
> > +		acpi_handle handle = device->handle;
> >  		unsigned long long psc;
> > -		acpi_status status = acpi_evaluate_integer(device->handle,
> > -							   "_PSC", NULL, &psc);
> > +		acpi_status status;
> > +
> > +		status = acpi_evaluate_integer(handle, "_PSC", NULL, &psc);
> >  		if (ACPI_FAILURE(status))
> >  			return -ENODEV;
> >  
> > -		result = psc;
> > -	}
> > -	/* The test below covers ACPI_STATE_UNKNOWN too. */
> > -	if (result <= ACPI_STATE_D2) {
> > -	  ; /* Do nothing. */
> > -	} else if (device->power.flags.power_resources) {
> > -		int error = acpi_power_get_inferred_state(device, &result);
> > -		if (error)
> > -			return error;
> > -	} else if (result == ACPI_STATE_D3_HOT) {
> > -		result = ACPI_STATE_D3;
> > +		/*
> > +		 * The power resources settings may indicate a power state
> > +		 * shallower than the actual power state of the device.
> > +		 *
> > +		 * Moreover, on systems predating ACPI 4.0, if the device
> > +		 * doesn't depend on any power resources and _PSC returns 3,
> > +		 * that means "power off".  We need to maintain compatibility
> > +		 * with those systems.
> > +		 */
> > +		if (psc > result && psc < ACPI_STATE_D3_COLD)
> > +			result = psc;
> > +		else if (result == ACPI_STATE_UNKNOWN)
> > +			result = psc > ACPI_STATE_D2 ? ACPI_STATE_D3_COLD : psc;
> >  	}
> >  
> >  	/*
> > 
> 
-- 
I speak only for myself.
Rafael J. Wysocki, Intel Open Source Technology Center.
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/