Re: hybrid raid1 with trim support

[Markus]

Hi!

Still the same with 3.8.4 ... anybody?

Best regards,
Markus

Markus schrieb am 12.03.2013:
> Hello!
> 
> I created a hybrid raid1 with one ssd and one hdd. Used writemostly and writebehind and put ext4 with discard enabled on it.
> This setup worked quite well for the last months (last kernel was 3.7.6). But now as I booted 3.8.2 the hdd was dropped from the raid with:
> > md/raid1:md2: Disk failure on sdb1, disabling device.
> > md/raid1:md2: Operation continuing on 1 devices.
> 
> Re-adding this drive it will try to resync but the hdd will be dropped short time after. Now I remounted the device without the discard flag and the resync and usage works as before.
> After remounting it again with discard enabled the hdd is dropped again. So I think this is the culprit as the hdd does obviously not support TRIM...
> 
> As it worked fine before, I think this is a regression? Or is this an intended change?
> 
> 
> Thanks,
> Markus
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/