Re: [PATCH] perf, tools: Make perf stat -I ... CSV output flat

[Andi Kleen]

On Wed, Mar 13, 2013 at 02:19:05PM +0100, Stephane Eranian wrote:
> On Thu, Mar 7, 2013 at 3:43 AM, Andi Kleen <andi@xxxxxxxxxxxxxx> wrote:
> > From: Andi Kleen <ak@xxxxxxxxxxxxxxx>
> >
> > The new perf stat interval code is quite useful, especially when the
> > data is post processed. Unfortunately the default -x, output is not
> > very friendly to programs when it contains more than one event.
> >
> > Each event is printed on its own line, each keyed with the time.
> >
> > You cannot directly feed it to gnuplot or into R to
> > compare different events at a specific point in time.
> >
> > This patch normalizes the output so that a single line contains all
> > the events for a given time period. Each event is an own column.
> >
> > With that it's quite easy to do plots and other analysis,
> > as this is the normalized format many data processing programs expect.
> >
> > This is not fully normalized yet, as per cpu counts also
> > end up on the same line (fixing this would be more intrusive)
> > But good enough for most purposes.
> >
> > The non CSV output is not changed.
> >
> > Example:
> >
> > $ perf stat -o /tmp/x.csv -I 100 -x, bc  <<< 2^400000 > /dev/null
> > $ gnuplot
> > gnuplot> set datafile separator ","
> > gnuplot> set terminal dumb
> > gnuplot> plot "/tmp/x.csv" every ::3 using 1:3
> >
> >   110 ++--------+---------+---------+--------+---------+---------+--------++
> >       +         +         +        "/tmp/x.csv" every ::3 using 1:3   A    +
> >   100 ++   A    A    A    A    A    A    A    A   A    A    A    A        ++
> >    90 ++                                                                  ++
> >       |                                                                    |
> >    80 ++                                                                  ++
> >       |                                                                    |
> >    70 ++                                                                  ++
> >       |                                                                    |
> >    60 ++                                                                  ++
> >    50 ++                                                                  ++
> >       |                                                                    |
> >    40 ++                                                                  ++
> >       |                                                                    |
> >    30 ++                                                                  ++
> >       |                                                                    |
> >    20 ++                                                                  ++
> >    10 ++                                                                  ++
> >       +         +         +         +        +         +         +A        +
> >     0 ++--------+---------+---------+--------+---------+---------+--------++
> >      0.2       0.4       0.6       0.8       1        1.2       1.4       1.6
> >
> > Cc: eranian@xxxxxxxxxx
> > ---
> >  tools/perf/builtin-stat.c |  118 +++++++++++++++++++++++++++++++--------------
> >  1 files changed, 82 insertions(+), 36 deletions(-)
> >
> > diff --git a/tools/perf/builtin-stat.c b/tools/perf/builtin-stat.c
> > index e6f4d1d..81d704a 100644
> > --- a/tools/perf/builtin-stat.c
> > +++ b/tools/perf/builtin-stat.c
> > @@ -66,8 +66,10 @@
> >  #define CNTR_NOT_COUNTED       "<not counted>"
> >
> >  static void print_stat(int argc, const char **argv);
> > -static void print_counter_aggr(struct perf_evsel *counter, char *prefix);
> > -static void print_counter(struct perf_evsel *counter, char *prefix);
> > +static void print_counter_aggr(struct perf_evsel *counter, char *prefix, int delim,
> > +                              int name);
> > +static void print_counter(struct perf_evsel *counter, char *prefix, int delim,
> > +                         int name);
> >  static void print_aggr_socket(char *prefix);
> >
> >  /* Default events used for perf stat -T */
> > @@ -343,6 +345,7 @@ static void print_interval(void)
> >         struct perf_stat *ps;
> >         struct timespec ts, rs;
> >         char prefix[64];
> > +       int delim = '\n';
> >
> >         if (no_aggr) {
> >                 list_for_each_entry(counter, &evsel_list->entries, node) {
> > @@ -373,15 +376,23 @@ static void print_interval(void)
> >         if (++num_print_interval == 25)
> >                 num_print_interval = 0;
> >
> > +       if (csv_output) {
> > +               delim = ',';
> > +               fprintf(output, "%s,", prefix);
> > +               prefix[0] = 0;
> > +       }
> > +
> >         if (aggr_socket)
> >                 print_aggr_socket(prefix);
> >         else if (no_aggr) {
> >                 list_for_each_entry(counter, &evsel_list->entries, node)
> > -                       print_counter(counter, prefix);
> > +                       print_counter(counter, prefix, delim, !csv_output);
> >         } else {
> >                 list_for_each_entry(counter, &evsel_list->entries, node)
> > -                       print_counter_aggr(counter, prefix);
> > +                       print_counter_aggr(counter, prefix, delim, !csv_output);
> >         }
> > +       if (csv_output)
> > +               fputc('\n', output);
> >  }
> >
> >  static int __run_perf_stat(int argc __maybe_unused, const char **argv)
> > @@ -503,6 +514,21 @@ static int __run_perf_stat(int argc __maybe_unused, const char **argv)
> >         t0 = rdclock();
> >         clock_gettime(CLOCK_MONOTONIC, &ref_time);
> >
> > +       if (interval && csv_output) {
> > +               fprintf(output, "time,,");
> 
> Don't quite understand the point of the ,,. By definition this
> extension is used for automatic

That was for one of the extra modi, I think cgroups.
It was easier to have the extra empty column than to special case this.


> in system-wide mode:
> 
> $ perf stat -I 10000 -x, -a -A -e cycles,instructions sleep 5
> 
> Don't you want events also grouped by CPU?

I mentioned that as an open. It would be good to have separate lines
per cpu, but that would have complicated the patch somewhat.
Could be done as a next step I suppose.

-Andi
-- 
ak@xxxxxxxxxxxxxxx -- Speaking for myself only
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/