[RFC 09/17] sh: replace CONFIG_GENERIC_GPIO by CONFIG_GPIOLIB

[Alexandre Courbot]

SH GPIO drivers all use gpiolib and CONFIG_GENERIC_GPIO is only selected
through CONFIG_GPIOLIB, yet some compilation units depended on
CONFIG_GENERIC_GPIO. Make them depend on CONFIG_GPIOLIB instead since it
is more accurate and prepares us for the future removal of
CONFIG_GENERIC_GPIO.

Signed-off-by: Alexandre Courbot <acourbot@xxxxxxxxxx>
---
 arch/sh/boards/mach-sdk7786/Makefile | 2 +-
 arch/sh/boards/mach-x3proto/Makefile | 2 +-
 arch/sh/kernel/cpu/sh2a/Makefile     | 2 +-
 arch/sh/kernel/cpu/sh3/Makefile      | 2 +-
 arch/sh/kernel/cpu/sh4a/Makefile     | 2 +-
 5 files changed, 5 insertions(+), 5 deletions(-)

diff --git a/arch/sh/boards/mach-sdk7786/Makefile b/arch/sh/boards/mach-sdk7786/Makefile
index 8ae56e9..45d32e3 100644
--- a/arch/sh/boards/mach-sdk7786/Makefile
+++ b/arch/sh/boards/mach-sdk7786/Makefile
@@ -1,4 +1,4 @@
 obj-y	:= fpga.o irq.o nmi.o setup.o
 
-obj-$(CONFIG_GENERIC_GPIO)	+= gpio.o
+obj-$(CONFIG_GPIOLIB)		+= gpio.o
 obj-$(CONFIG_HAVE_SRAM_POOL)	+= sram.o
diff --git a/arch/sh/boards/mach-x3proto/Makefile b/arch/sh/boards/mach-x3proto/Makefile
index 708c21c..0cbe3d0 100644
--- a/arch/sh/boards/mach-x3proto/Makefile
+++ b/arch/sh/boards/mach-x3proto/Makefile
@@ -1,3 +1,3 @@
 obj-y += setup.o ilsel.o
 
-obj-$(CONFIG_GENERIC_GPIO)	+= gpio.o
+obj-$(CONFIG_GPIOLIB)		+= gpio.o
diff --git a/arch/sh/kernel/cpu/sh2a/Makefile b/arch/sh/kernel/cpu/sh2a/Makefile
index 130984c..92f0da4 100644
--- a/arch/sh/kernel/cpu/sh2a/Makefile
+++ b/arch/sh/kernel/cpu/sh2a/Makefile
@@ -21,5 +21,5 @@ pinmux-$(CONFIG_CPU_SUBTYPE_SH7203)	:= pinmux-sh7203.o
 pinmux-$(CONFIG_CPU_SUBTYPE_SH7264)	:= pinmux-sh7264.o
 pinmux-$(CONFIG_CPU_SUBTYPE_SH7269)	:= pinmux-sh7269.o
 
-obj-$(CONFIG_GENERIC_GPIO)		+= $(pinmux-y)
+obj-$(CONFIG_GPIOLIB)			+= $(pinmux-y)
 obj-$(CONFIG_HAVE_HW_BREAKPOINT)	+= ubc.o
diff --git a/arch/sh/kernel/cpu/sh3/Makefile b/arch/sh/kernel/cpu/sh3/Makefile
index 6f13f33..d3634ae 100644
--- a/arch/sh/kernel/cpu/sh3/Makefile
+++ b/arch/sh/kernel/cpu/sh3/Makefile
@@ -30,4 +30,4 @@ clock-$(CONFIG_CPU_SUBTYPE_SH7712)	:= clock-sh7712.o
 pinmux-$(CONFIG_CPU_SUBTYPE_SH7720)	:= pinmux-sh7720.o
 
 obj-y	+= $(clock-y)
-obj-$(CONFIG_GENERIC_GPIO)	+= $(pinmux-y)
+obj-$(CONFIG_GPIOLIB)			+= $(pinmux-y)
diff --git a/arch/sh/kernel/cpu/sh4a/Makefile b/arch/sh/kernel/cpu/sh4a/Makefile
index 8fc6ec2..0705df7 100644
--- a/arch/sh/kernel/cpu/sh4a/Makefile
+++ b/arch/sh/kernel/cpu/sh4a/Makefile
@@ -47,6 +47,6 @@ pinmux-$(CONFIG_CPU_SUBTYPE_SHX3)	:= pinmux-shx3.o
 
 obj-y					+= $(clock-y)
 obj-$(CONFIG_SMP)			+= $(smp-y)
-obj-$(CONFIG_GENERIC_GPIO)		+= $(pinmux-y)
+obj-$(CONFIG_GPIOLIB)			+= $(pinmux-y)
 obj-$(CONFIG_PERF_EVENTS)		+= perf_event.o
 obj-$(CONFIG_HAVE_HW_BREAKPOINT)	+= ubc.o
-- 
1.8.1.5

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/