[PATCH v2 2/7] watchdog: w83627hf: Enable watchdog only once

From: Guenter Roeck
Date: Sun Mar 10 2013 - 19:16:07 EST


It is unnecessary to enable the logical device and WDT0 each time
the watchdog is accessed. Do it only once during initialization.

Signed-off-by: Guenter Roeck <linux@xxxxxxxxxxxx>
---
v2: No change

drivers/watchdog/w83627hf_wdt.c | 35 +++++++++++++++++------------------
1 file changed, 17 insertions(+), 18 deletions(-)

diff --git a/drivers/watchdog/w83627hf_wdt.c b/drivers/watchdog/w83627hf_wdt.c
index 51a22ab..bb19368 100644
--- a/drivers/watchdog/w83627hf_wdt.c
+++ b/drivers/watchdog/w83627hf_wdt.c
@@ -66,28 +66,10 @@ MODULE_PARM_DESC(timeout,

static void w83627hf_select_wd_register(void)
{
- unsigned char c;
outb_p(0x87, WDT_EFER); /* Enter extended function mode */
outb_p(0x87, WDT_EFER); /* Again according to manual */
-
- outb(0x20, WDT_EFER); /* check chip version */
- c = inb(WDT_EFDR);
- if (c == 0x82) { /* W83627THF */
- outb_p(0x2b, WDT_EFER); /* select GPIO3 */
- c = ((inb_p(WDT_EFDR) & 0xf7) | 0x04); /* select WDT0 */
- outb_p(0x2b, WDT_EFER);
- outb_p(c, WDT_EFDR); /* set GPIO3 to WDT0 */
- } else if (c == 0x88 || c == 0xa0) { /* W83627EHF / W83627DHG */
- outb_p(0x2d, WDT_EFER); /* select GPIO5 */
- c = inb_p(WDT_EFDR) & ~0x01; /* PIN77 -> WDT0# */
- outb_p(0x2d, WDT_EFER);
- outb_p(c, WDT_EFDR); /* set GPIO5 to WDT0 */
- }
-
outb_p(0x07, WDT_EFER); /* point to logical device number reg */
outb_p(0x08, WDT_EFDR); /* select logical device 8 (GPIO2) */
- outb_p(0x30, WDT_EFER); /* select CR30 */
- outb_p(0x01, WDT_EFDR); /* set bit 0 to activate GPIO2 */
}

static void w83627hf_unselect_wd_register(void)
@@ -104,6 +86,23 @@ static void w83627hf_init(struct watchdog_device *wdog)

w83627hf_select_wd_register();

+ outb(0x20, WDT_EFER); /* check chip version */
+ t = inb(WDT_EFDR);
+ if (t == 0x82) { /* W83627THF */
+ outb_p(0x2b, WDT_EFER); /* select GPIO3 */
+ t = ((inb_p(WDT_EFDR) & 0xf7) | 0x04); /* select WDT0 */
+ outb_p(0x2b, WDT_EFER);
+ outb_p(t, WDT_EFDR); /* set GPIO3 to WDT0 */
+ } else if (t == 0x88 || t == 0xa0) { /* W83627EHF / W83627DHG */
+ outb_p(0x2d, WDT_EFER); /* select GPIO5 */
+ t = inb_p(WDT_EFDR) & ~0x01; /* PIN77 -> WDT0# */
+ outb_p(0x2d, WDT_EFER);
+ outb_p(t, WDT_EFDR); /* set GPIO5 to WDT0 */
+ }
+
+ outb_p(0x30, WDT_EFER); /* select CR30 */
+ outb_p(0x01, WDT_EFDR); /* set bit 0 to activate GPIO2 */
+
outb_p(0xF6, WDT_EFER); /* Select CRF6 */
t = inb_p(WDT_EFDR); /* read CRF6 */
if (t != 0) {
--
1.7.9.7

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/