Re: Question about fixed-clock

[Daniel Mack]

On 08.03.2013 03:15, Mark Brown wrote:
> On Thu, Mar 07, 2013 at 11:31:59PM +0100, Daniel Mack wrote:
>> On 07.03.2013 19:42, Afzal Mohammed wrote:
> 
>>> I feel that for a platform having it's clock tree in DT, of_clk_init
>>> would take care of it, but if clock tree data is not in DT, clock
>>> tree would have to be extended in a non-DT way.
> 
>> Hmm, I don't follow. So for generic OMAP board in general which does
>> *not* have its SoC clocks in DT, the question is who's in charge of
>> registering out-of-SoC fixed clocks that are defined in DT.
> 
>> Note that the clock I'm dealing with here is _outside_ of the SoC, and I
>> just need to have it in DT, so it can feed another clock chip's input pin.
> 
>> Grep'ing through arch/arm, it seems that the imx arch does the same
>> thing my patch does, but I could also imagine that it should be done
>> somewhere from the DT core. I copied Grant, Rob and Mark for more comments.
> 
> Wouldn't this just be set up by the DT in the same way that other
> off-SoC hardware is?

Well,  I thought so too. To repeat, in my DT, I have:

	ref25: ref25M {
		compatible = "fixed-clock";
		#clock-cells = <0>;
		clock-frequency = <25000000>;
	};

to represent an osciallator on the board. I need to specify it here so I
can pass a reference to another chip:

	si5351a: clock-generator@60 {
		compatible = "silabs,si5351a";
		clocks = <&ref25>;
	};

I would have expected that "fixed-clock" is matched by a driver lurking
around for DT boards, just like what the "fixed-regulator" driver does
for instance. But the clock device isn't initialized unless board code
explicitly calls of_clk_init() with a table mentioning "fixed-clock", as
in my patch.

I don't know the clock framework well enough, but it seems that either
all DT boards are supposed to do the same in their generic bits (which
sounds like a lot of code duplication), or the fixed-clock driver should
behave like any other driver wrt its probing from DT. I'm open to
suggestions :)


Daniel

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/