From 7660d82d93eb39beeedaf2e8c28d9bee8e1f3bd7 Mon Sep 17 00:00:00 2001 From: Takahisa Tanaka Date: Mon, 18 Feb 2013 23:47:49 +0900 Subject: [PATCH] sp5100_tco: Remove code that may cause a boot failure Signed-off-by: Takahisa Tanaka --- drivers/watchdog/sp5100_tco.c | 140 ++++-------------------------------------- drivers/watchdog/sp5100_tco.h | 2 +- 2 files changed, 14 insertions(+), 128 deletions(-) diff --git a/drivers/watchdog/sp5100_tco.c b/drivers/watchdog/sp5100_tco.c index e3b8f75..eaf396b 100644 --- a/drivers/watchdog/sp5100_tco.c +++ b/drivers/watchdog/sp5100_tco.c @@ -40,13 +40,12 @@ #include "sp5100_tco.h" /* Module and version information */ -#define TCO_VERSION "0.03" +#define TCO_VERSION "0.05" #define TCO_MODULE_NAME "SP5100 TCO timer" #define TCO_DRIVER_NAME TCO_MODULE_NAME ", v" TCO_VERSION /* internal variables */ static u32 tcobase_phys; -static u32 resbase_phys; static u32 tco_wdt_fired; static void __iomem *tcobase; static unsigned int pm_iobase; @@ -54,10 +53,6 @@ static DEFINE_SPINLOCK(tco_lock); /* Guards the hardware */ static unsigned long timer_alive; static char tco_expect_close; static struct pci_dev *sp5100_tco_pci; -static struct resource wdt_res = { - .name = "Watchdog Timer", - .flags = IORESOURCE_MEM, -}; /* the watchdog platform device */ static struct platform_device *sp5100_tco_platform_device; @@ -75,12 +70,6 @@ module_param(nowayout, bool, 0); MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started." " (default=" __MODULE_STRING(WATCHDOG_NOWAYOUT) ")"); -static unsigned int force_addr; -module_param(force_addr, uint, 0); -MODULE_PARM_DESC(force_addr, "Force the use of specified MMIO address." - " ONLY USE THIS PARAMETER IF YOU REALLY KNOW" - " WHAT YOU ARE DOING (default=none)"); - /* * Some TCO specific functions */ @@ -176,39 +165,6 @@ static void tco_timer_enable(void) } } -static void tco_timer_disable(void) -{ - int val; - - if (sp5100_tco_pci->revision >= 0x40) { - /* For SB800 or later */ - /* Enable watchdog decode bit and Disable watchdog timer */ - outb(SB800_PM_WATCHDOG_CONTROL, SB800_IO_PM_INDEX_REG); - val = inb(SB800_IO_PM_DATA_REG); - val |= SB800_PCI_WATCHDOG_DECODE_EN; - val |= SB800_PM_WATCHDOG_DISABLE; - outb(val, SB800_IO_PM_DATA_REG); - } else { - /* For SP5100 or SB7x0 */ - /* Enable watchdog decode bit */ - pci_read_config_dword(sp5100_tco_pci, - SP5100_PCI_WATCHDOG_MISC_REG, - &val); - - val |= SP5100_PCI_WATCHDOG_DECODE_EN; - - pci_write_config_dword(sp5100_tco_pci, - SP5100_PCI_WATCHDOG_MISC_REG, - val); - - /* Disable Watchdog timer */ - outb(SP5100_PM_WATCHDOG_CONTROL, SP5100_IO_PM_INDEX_REG); - val = inb(SP5100_IO_PM_DATA_REG); - val |= SP5100_PM_WATCHDOG_DISABLE; - outb(val, SP5100_IO_PM_DATA_REG); - } -} - /* * /dev/watchdog handling */ @@ -361,7 +317,7 @@ static unsigned char sp5100_tco_setupdevice(void) { struct pci_dev *dev = NULL; const char *dev_name = NULL; - u32 val, tmp_val; + u32 val; u32 index_reg, data_reg, base_addr; /* Match the PCI device */ @@ -395,7 +351,7 @@ static unsigned char sp5100_tco_setupdevice(void) /* Request the IO ports used by this driver */ pm_iobase = SP5100_IO_PM_INDEX_REG; if (!request_region(pm_iobase, SP5100_PM_IOPORTS_SIZE, dev_name)) { - pr_err("I/O address 0x%04x already in use\n", pm_iobase); + pr_info("I/O address 0x%04x already in use\n", pm_iobase); goto exit; } @@ -412,14 +368,14 @@ static unsigned char sp5100_tco_setupdevice(void) /* Low three bits of BASE are reserved */ val = val << 8 | (inb(data_reg) & 0xf8); - pr_debug("Got 0x%04x from indirect I/O\n", val); + pr_debug("Got 0x%08x from indirect I/O\n", val); /* Check MMIO address conflict */ if (request_mem_region_exclusive(val, SP5100_WDT_MEM_MAP_SIZE, dev_name)) goto setup_wdt; else - pr_debug("MMIO address 0x%04x already in use\n", val); + pr_info("MMIO address 0x%08x already in use\n", val); /* * Secondly, Find the watchdog timer MMIO address @@ -451,71 +407,16 @@ static unsigned char sp5100_tco_setupdevice(void) /* Check MMIO address conflict */ if (request_mem_region_exclusive(val, SP5100_WDT_MEM_MAP_SIZE, dev_name)) { - pr_debug("Got 0x%04x from SBResource_MMIO register\n", + pr_debug("Got 0x%08x from SBResource_MMIO register\n", val); goto setup_wdt; } else - pr_debug("MMIO address 0x%04x already in use\n", val); + pr_info("MMIO address 0x%08x already in use\n", val); } else - pr_debug("SBResource_MMIO is disabled(0x%04x)\n", val); + pr_info("SBResource_MMIO is disabled (0x%08x)\n", val); - /* - * Lastly re-programming the watchdog timer MMIO address, - * This method is a last resort... - * - * Before re-programming, to ensure that the watchdog timer - * is disabled, disable the watchdog timer. - */ - tco_timer_disable(); - - if (force_addr) { - /* - * Force the use of watchdog timer MMIO address, and aligned to - * 8byte boundary. - */ - force_addr &= ~0x7; - val = force_addr; - - pr_info("Force the use of 0x%04x as MMIO address\n", val); - } else { - /* - * Get empty slot into the resource tree for watchdog timer. - */ - if (allocate_resource(&iomem_resource, - &wdt_res, - SP5100_WDT_MEM_MAP_SIZE, - 0xf0000000, - 0xfffffff8, - 0x8, - NULL, - NULL)) { - pr_err("MMIO allocation failed\n"); - goto unreg_region; - } - - val = resbase_phys = wdt_res.start; - pr_debug("Got 0x%04x from resource tree\n", val); - } - - /* Restore to the low three bits */ - outb(base_addr+0, index_reg); - tmp_val = val | (inb(data_reg) & 0x7); - - /* Re-programming the watchdog timer base address */ - outb(base_addr+0, index_reg); - outb((tmp_val >> 0) & 0xff, data_reg); - outb(base_addr+1, index_reg); - outb((tmp_val >> 8) & 0xff, data_reg); - outb(base_addr+2, index_reg); - outb((tmp_val >> 16) & 0xff, data_reg); - outb(base_addr+3, index_reg); - outb((tmp_val >> 24) & 0xff, data_reg); - - if (!request_mem_region_exclusive(val, SP5100_WDT_MEM_MAP_SIZE, - dev_name)) { - pr_err("MMIO address 0x%04x already in use\n", val); - goto unreg_resource; - } + pr_notice("Can't find MMIO address, giving up.\n"); + goto unreg_region; setup_wdt: tcobase_phys = val; @@ -526,7 +427,7 @@ setup_wdt: goto unreg_mem_region; } - pr_info("Using 0x%04x for watchdog MMIO address\n", val); + pr_info("Using 0x%08x for watchdog MMIO address\n", val); /* Setup the watchdog timer */ tco_timer_enable(); @@ -555,9 +456,6 @@ setup_wdt: unreg_mem_region: release_mem_region(tcobase_phys, SP5100_WDT_MEM_MAP_SIZE); -unreg_resource: - if (resbase_phys) - release_resource(&wdt_res); unreg_region: release_region(pm_iobase, SP5100_PM_IOPORTS_SIZE); exit: @@ -567,7 +465,6 @@ exit: static int sp5100_tco_init(struct platform_device *dev) { int ret; - char addr_str[16]; /* * Check whether or not the hardware watchdog is there. If found, then @@ -599,23 +496,14 @@ static int sp5100_tco_init(struct platform_device *dev) clear_bit(0, &timer_alive); /* Show module parameters */ - if (force_addr == tcobase_phys) - /* The force_addr is vaild */ - sprintf(addr_str, "0x%04x", force_addr); - else - strcpy(addr_str, "none"); - - pr_info("initialized (0x%p). heartbeat=%d sec (nowayout=%d, " - "force_addr=%s)\n", - tcobase, heartbeat, nowayout, addr_str); + pr_info("initialized (0x%p). heartbeat=%d sec (nowayout=%d)\n", + tcobase, heartbeat, nowayout); return 0; exit: iounmap(tcobase); release_mem_region(tcobase_phys, SP5100_WDT_MEM_MAP_SIZE); - if (resbase_phys) - release_resource(&wdt_res); release_region(pm_iobase, SP5100_PM_IOPORTS_SIZE); return ret; } @@ -630,8 +518,6 @@ static void sp5100_tco_cleanup(void) misc_deregister(&sp5100_tco_miscdev); iounmap(tcobase); release_mem_region(tcobase_phys, SP5100_WDT_MEM_MAP_SIZE); - if (resbase_phys) - release_resource(&wdt_res); release_region(pm_iobase, SP5100_PM_IOPORTS_SIZE); } diff --git a/drivers/watchdog/sp5100_tco.h b/drivers/watchdog/sp5100_tco.h index 71594a0..2b28c00 100644 --- a/drivers/watchdog/sp5100_tco.h +++ b/drivers/watchdog/sp5100_tco.h @@ -57,7 +57,7 @@ #define SB800_PM_WATCHDOG_DISABLE (1 << 2) #define SB800_PM_WATCHDOG_SECOND_RES (3 << 0) #define SB800_ACPI_MMIO_DECODE_EN (1 << 0) -#define SB800_ACPI_MMIO_SEL (1 << 2) +#define SB800_ACPI_MMIO_SEL (1 << 1) #define SB800_PM_WDT_MMIO_OFFSET 0xB00 -- 1.8.1.2