[PATCH 13/93] 8250/16?50: Add support for Broadcom TruManage redirected serial port

From: Herton Ronaldo Krzesinski
Date: Tue Feb 05 2013 - 17:32:26 EST

3.5.7.5 -stable review patch. If anyone has any objections, please let me know.

------------------

From: Stephen Hurd <shurd@xxxxxxxxxxxx>

commit ebebd49a8eab5e9aa1b1f8f1614ccc3c2120f886 upstream.

Add support for the UART device present in Broadcom TruManage capable
NetXtreme chips (ie: 5761m 5762, and 5725).

This implementation has a hidden transmit FIFO, so running in single-byte
interrupt mode results in too many interrupts. The UART_CAP_HFIFO
capability was added to track this. It continues to reload the THR as long
as the THRE and TSRE bits are set in the LSR up to a specified limit (1024
is used here).

Signed-off-by: Stephen Hurd <shurd@xxxxxxxxxxxx>
Signed-off-by: Michael Chan <mchan@xxxxxxxxxxxx>
Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
[ herton: include/uapi/linux/serial_core.h -> include/linux/serial_core.h,
adjust context and port ID defines, adapted for usage of struct uart_port
in pci_brcm_trumanage_setup ]
Signed-off-by: Herton Ronaldo Krzesinski <herton.krzesinski@xxxxxxxxxxxxx>
---
drivers/tty/serial/8250/8250.c | 11 +++++++++++
drivers/tty/serial/8250/8250.h | 1 +
drivers/tty/serial/8250/8250_pci.c | 38 ++++++++++++++++++++++++++++++++++++
include/linux/serial_core.h | 3 ++-
4 files changed, 52 insertions(+), 1 deletion(-)

diff --git a/drivers/tty/serial/8250/8250.c b/drivers/tty/serial/8250/8250.c
index 6e1958a..5074eb7 100644
--- a/drivers/tty/serial/8250/8250.c
+++ b/drivers/tty/serial/8250/8250.c
@@ -282,6 +282,12 @@ static const struct serial8250_config uart_config[] = {
.fcr = UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_10,
.flags = UART_CAP_FIFO | UART_CAP_AFE | UART_CAP_EFR,
},
+ [PORT_BRCM_TRUMANAGE] = {
+ .name = "TruManage",
+ .fifo_size = 1,
+ .tx_loadsz = 1024,
+ .flags = UART_CAP_HFIFO,
+ },
};

/* Uart divisor latch read */
@@ -1427,6 +1433,11 @@ void serial8250_tx_chars(struct uart_8250_port *up)
port->icount.tx++;
if (uart_circ_empty(xmit))
break;
+ if (up->capabilities & UART_CAP_HFIFO) {
+ if ((serial_port_in(port, UART_LSR) & BOTH_EMPTY) !=
+ BOTH_EMPTY)
+ break;
+ }
} while (--count > 0);

if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
diff --git a/drivers/tty/serial/8250/8250.h b/drivers/tty/serial/8250/8250.h
index f9719d1..bb95259 100644
--- a/drivers/tty/serial/8250/8250.h
+++ b/drivers/tty/serial/8250/8250.h
@@ -73,6 +73,7 @@ struct serial8250_config {
#define UART_CAP_AFE (1 << 11) /* MCR-based hw flow control */
#define UART_CAP_UUE (1 << 12) /* UART needs IER bit 6 set (Xscale) */
#define UART_CAP_RTOIE (1 << 13) /* UART needs IER bit 4 set (Xscale, Tegra) */
+#define UART_CAP_HFIFO (1 << 14) /* UART has a "hidden" FIFO */

#define UART_BUG_QUOT (1 << 0) /* UART has buggy quot LSB */
#define UART_BUG_TXEN (1 << 1) /* UART has buggy TX IIR status */
diff --git a/drivers/tty/serial/8250/8250_pci.c b/drivers/tty/serial/8250/8250_pci.c
index 6b8fcb4..e054448 100644
--- a/drivers/tty/serial/8250/8250_pci.c
+++ b/drivers/tty/serial/8250/8250_pci.c
@@ -1078,6 +1078,18 @@ pci_omegapci_setup(struct serial_private *priv,
return setup_port(priv, port, 2, idx * 8, 0);
}

+static int
+pci_brcm_trumanage_setup(struct serial_private *priv,
+ const struct pciserial_board *board,
+ struct uart_port *port, int idx)
+{
+ int ret = pci_default_setup(priv, board, port, idx);
+
+ port->type = PORT_BRCM_TRUMANAGE;
+ port->flags = (port->flags | UPF_FIXED_PORT | UPF_FIXED_TYPE);
+ return ret;
+}
+
static int skip_tx_en_setup(struct serial_private *priv,
const struct pciserial_board *board,
struct uart_port *port, int idx)
@@ -1189,6 +1201,7 @@ pci_xr17c154_setup(struct serial_private *priv,
#define PCIE_DEVICE_ID_NEO_2_OX_IBM 0x00F6
#define PCI_DEVICE_ID_PLX_CRONYX_OMEGA 0xc001
#define PCI_DEVICE_ID_INTEL_PATSBURG_KT 0x1d3d
+#define PCI_DEVICE_ID_BROADCOM_TRUMANAGE 0x160a

/* Unknown vendors/cards - this should not be in linux/pci_ids.h */
#define PCI_SUBDEVICE_ID_UNKNOWN_0x1584 0x1584
@@ -1730,6 +1743,17 @@ static struct pci_serial_quirk pci_serial_quirks[] __refdata = {
.setup = pci_omegapci_setup,
},
/*
+ * Broadcom TruManage (NetXtreme)
+ */
+ {
+ .vendor = PCI_VENDOR_ID_BROADCOM,
+ .device = PCI_DEVICE_ID_BROADCOM_TRUMANAGE,
+ .subvendor = PCI_ANY_ID,
+ .subdevice = PCI_ANY_ID,
+ .setup = pci_brcm_trumanage_setup,
+ },
+
+ /*
* Default "match everything" terminator entry
*/
{
@@ -1918,6 +1942,7 @@ enum pci_board_num_t {
pbn_ce4100_1_115200,
pbn_omegapci,
pbn_NETMOS9900_2s_115200,
+ pbn_brcm_trumanage,
};

/*
@@ -2624,6 +2649,12 @@ static struct pciserial_board pci_boards[] __devinitdata = {
.num_ports = 2,
.base_baud = 115200,
},
+ [pbn_brcm_trumanage] = {
+ .flags = FL_BASE0,
+ .num_ports = 1,
+ .reg_shift = 2,
+ .base_baud = 115200,
+ },
};

static const struct pci_device_id softmodem_blacklist[] = {
@@ -4184,6 +4215,13 @@ static struct pci_device_id serial_pci_tbl[] = {
pbn_omegapci },

/*
+ * Broadcom TruManage
+ */
+ { PCI_VENDOR_ID_BROADCOM, PCI_DEVICE_ID_BROADCOM_TRUMANAGE,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+ pbn_brcm_trumanage },
+
+ /*
* These entries match devices with class COMMUNICATION_SERIAL,
* COMMUNICATION_MODEM or COMMUNICATION_MULTISERIAL
*/
diff --git a/include/linux/serial_core.h b/include/linux/serial_core.h
index 65db992..a3fa4d5 100644
--- a/include/linux/serial_core.h
+++ b/include/linux/serial_core.h
@@ -47,7 +47,8 @@
#define PORT_U6_16550A 19 /* ST-Ericsson U6xxx internal UART */
#define PORT_TEGRA 20 /* NVIDIA Tegra internal UART */
#define PORT_XR17D15X 21 /* Exar XR17D15x UART */
-#define PORT_MAX_8250 21 /* max port ID */
+#define PORT_BRCM_TRUMANAGE 22
+#define PORT_MAX_8250 22 /* max port ID */

/*
* ARM specific type numbers. These are not currently guaranteed
--
1.7.9.5

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/