Re: How kernel handle interrupts[AX88796B network controller]

From: anish kumar
Date: Mon Jan 07 2013 - 11:36:31 EST


On Sat, 2012-12-22 at 23:11 +0800, Woody Wu wrote:
> On Fri, Dec 21, 2012 at 01:33:03PM -0800, anish kumar wrote:
> > On Fri, 2012-12-21 at 23:34 +0800, Woody Wu wrote:
> > > On Thu, Dec 20, 2012 at 10:05:05AM -0800, anish singh wrote:
> > > > On Dec 20, 2012 6:30 AM, "Woody Wu" <narkewoody@xxxxxxxxx> wrote:
> > > > >
> > > > > Hi, List
> > > > >
> > > > > Where is the Kernel code that handles external interrupts? I want to
> > > > > have a look at it but haven't found out where it is.
> > > > >
> > > > > Actually, I have some basic questions about interrupt handling in Linux.
> > > > > 1. After Kernel's ISR received an interrupt, I believe it will invoke a
> > > > > handler defined in a device driver if any. But it should be the
> > > > > device driver's responsibility or kernel ISR's responsibility to
> > > > > clear (or acknowledge) the interrupt?
> > > > If the interrupt in question is currently being handled then in
> > > > the case of edge triggered interrupt we just mask the interrupt,set it
> > > > pending and bail out.Once the interrupt handler completes then we check for
> > > > pending interrupt and handle it.In level triggered we don't do that.
> > > > Kerenel ISR -this is mixture of core kernel interrupt handling code + your
> > > > device driver interrupt handler(if this is chip driver which is supposed to
> > > > get one interrupt and is reponsible for calling other interrupt handlers
> > > > based on the chip register status then you do explicit masking unmasking
> > > > yourself).
> > > > If you device driver is a interrupt controller driver then you register
> > > > your driver with kernel interrupt handling code and need to write some
> > > > callbacks such as .mask,.unmask and so on.This callbacks are called at
> > > > appropiate places whenever the interrupt is raised.This interrupt is then
> > > > passed to drivers who has requested for this interrupt by calling
> > > > request_irq.
> > > > >
> > > > > 2. My device, an AX88796B network controller, asserting the interrupt
> > > > > line in a level-triggered manner. Now I met problem with the device
> > > > that
> > > > > might caused by the CPU interrupt mode is not set as level-triggered by
> > > > > edge trigger. My CPU is Samsung S3C2410, an ARM920T powered one. Does
> > > > > anyone know usually where and how should I do this kind of setting?
> > > > Just pass the parameter "level triggered" in request_irq in your device
> > > > driver.
> > >
> > > Hi Sign,
> > >
> > > I searched the interrupt.h for the all the defined flags that I can pass
> > > to the request_irq, but there is no a flag looks like "level triggered".
> > > Would you tell me what you mean the parameter "level triggered"?
> > irq_set_irq_type(info->irq, IRQ_TYPE_LEVEL_LOW)
> >
> > include/linux/irq.h
> > IRQ_TYPE_LEVEL_HIGH - high level triggered
> > IRQ_TYPE_LEVEL_LOW - low level triggered
>
> Thanks. Now I find the function.
>
> I searched some code about irq in ARM architecure. Some other
> people talked about do_IRQ() probabaly is wrong for ARM. There is simply
> no that function in ARM. Maybe the do_IRQ in x86 is replaced by
> handle_IRQ.
arch/arm/kernel/entry-armv.S
__irq_svc is called by the arm processor which in turn calls irq_handler
macro.I think this is the lowest level handler after which linux
interrupt handling takes over.
>
> For the irq_set_irq_type(), do you think what's the correct place to
> call it? Inside my device driver or outside the device driver (probably
> in the board definition file)? If that should be called inside a device
> driver, should it be the driver probe function or in the open function?
> After or before the invocation of request_irq()?
irq_set_irq_type() should be called by device driver code not by the
board file.It should be called in the probe function AFAIK.
>
> Sorry for asking too many question. I found the kernel + device driver
> irq handling part still not clear to me.
You are welcome to ask as many question as you want.
>
>
> > >
> > > Thanks.
> > >
> > > > >
> > > > >
> > > > > Thanks in advance.
> > > > >
> > > > > --
> > > > > woody
> > > > > I can't go back to yesterday - because I was a different person then.
> > > > >
> > > > > _______________________________________________
> > > > > Kernelnewbies mailing list
> > > > > Kernelnewbies@xxxxxxxxxxxxxxxxx
> > > > > http://lists.kernelnewbies.org/mailman/listinfo/kernelnewbies
> > >
> >
>


--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/