Re: [PATCH V3 3/3] mfd: stmpe: Update DT support in stmpe driver

[Grant Likely]

On Fri, 23 Nov 2012 23:03:47 +0530, Viresh Kumar <viresh.kumar@xxxxxxxxxx> wrote:
> On 23 November 2012 15:11, Grant Likely <grant.likely@xxxxxxxxxxxx> wrote:
> > On Fri, 23 Nov 2012 00:26:20 +0530, Viresh Kumar <viresh.kumar@xxxxxxxxxx> wrote:
> 
> >> + - irq-trigger                       : IRQ trigger to use for the interrupt to the host
> >> + - irq-invert-polarity               : bool, IRQ line is connected with reversed polarity
> >
> > This looks odd. Normally the interrupt polarity should be encoded in the irq
> > specifier flags field.
> 
> Hi Grant and Lee Jones,
> 
> This looks odd because stmpe is odd, i am taking the discussion held
> with Lee jones to this thread.
> 
> So, how interrupt stuff works currently in DT..
> We have a interrupt controller IC:
> 
> 	ic: interrupt-controller@40008000 {
> 		compatible = "foo";
> 		interrupt-controller;
> 		#interrupt-cells = <2>;
>                 ...
> 	};
> 
> And we have a user of this IC:
> 
> 	foo-peripheral@40048000 {
> 		compatible = "foo-peripheral";
> 		interrupt-parent = <&ic>;
> 		interrupts = <39 4>;
> 	};
> 
> Here first field of "interrupts" gives interrupt line number and the second one
> gives polarity, interrupt type etc..
> 
> All is good till now. Now, every interrupt controller supports the first
> field, but the second one depends on its capabilities. An interrupt controller
> might not have registers to configure interrupt polarity, type, etc of
> the interrupt
> it will service and so the second field wouldn't be available for them.
> 
> For now just think stmpe is not a MFD and not a interrupt controller
> either. It is
> just a simple device, dev-foo.
> 
> It will declare values of its interrupts field based on the type of
> interrupt controller
> that will service its interrupt and that can be anything like VIC/GIC/GPIO
> controller.

Ah, so it is configuring the way the device emits interrupts; not how
the interrupt controller processes them. Fair enough.

It would actually be good to ask the interrupt controller driver what
kind of interrupt signal it expects for a given interrupt line. That
should also solve the problem and I think it would be more useful to
other devices. Can you investigate whether or not
irqd_get_trigger_type() returns the information you need?

g.

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/