Re: [PATCH v3 2/2] therma: exynos: Supports thermal tripping

[jonghwa3 . lee]

Hi,
On 2012ë 11ì 20ì 10:40, Kyungmin Park wrote:
> On 11/20/12, Jonghwan Choi <jhbird.choi@xxxxxxxxxxx> wrote:
>> TMU urgently sends active-high signal (thermal trip) to PMU,
>> and thermal tripping by hardware logic i.e PMU is performed.
>> Thermal tripping means that PMU cut off the whole power of SoC
>> by controlling external voltage regulator.
>>
>> Signed-off-by: Jonghwan Choi <jhbird.choi@xxxxxxxxxxx>
> Ackedy-by: Kyungmin Park <kyungmin.park@xxxxxxxxxxx>
>> ---
>>  drivers/thermal/exynos_thermal.c |   10 ++++++++++
>>  1 files changed, 10 insertions(+), 0 deletions(-)
>>
>> diff --git a/drivers/thermal/exynos_thermal.c
>> b/drivers/thermal/exynos_thermal.c
>> index 129e827..569478d 100644
>> --- a/drivers/thermal/exynos_thermal.c
>> +++ b/drivers/thermal/exynos_thermal.c
>> @@ -58,6 +58,7 @@
>>  #define EXYNOS_TMU_CORE_ON             BIT(0)
>>  #define EXYNOS_TMU_CORE_ON_SHIFT       0
>>  #define EXYNOS_TMU_CORE_ON_MASK                (0x1 <<
>> EXYNOS_TMU_CORE_ON_SHIFT)
>> +#define EXYNOS_TMU_TRIP_EN             BIT(12)
>>  #define EXYNOS_TMU_DEF_CODE_TO_TEMP_OFFSET     50
>>
>>  /* Exynos4210 specific registers */
>> @@ -631,6 +632,12 @@ static int exynos_tmu_initialize(struct
>> platform_device
>> *pdev)
>>                         goto out;
>>                 }
>>                 rising_threshold |= (threshold_code << 16);
>> +               threshold_code = temp_to_code(data,
>> pdata->trigger_levels[3]);
>> +               if (threshold_code < 0) {
>> +                       ret = threshold_code;
>> +                       goto out;
>> +               }
>> +               rising_threshold |= (threshold_code << 24);
>>
>>                 writel(rising_threshold,
>>                                 data->base + EXYNOS_THD_TEMP_RISE);
>> @@ -665,6 +672,8 @@ static void exynos_tmu_control(struct platform_device
>> *pdev, bool on)
>>                 con &= ~(EXYNOS_TMU_TRIP_MODE_MASK | EXYNOS_MUX_ADDR_MASK);
>>                 con |= pdata->noise_cancel_mode <<
>> EXYNOS_TMU_TRIP_MODE_SHIFT;
>>                 con |= (EXYNOS_MUX_ADDR_VALUE << EXYNOS_MUX_ADDR_SHIFT);
>> +               if (pdata->trigger_levels[3])
>> +                       con |= EXYNOS_TMU_TRIP_EN;
>>         }
Why don't you support trigger_level[3] in exynos4210 either? Even though 4210 doesn't support
hardware tripping,
I think it can be set in same way. I've done it in my local git with following codes.

if (data->soc == SOC_ARCH_EXYNOS4210)
interrupt_en |= pdata->trigger_level3_en << 12;
else
con |= pdata->trigger_level3_en <<12;

How do you think of it?

Thanks.
>>         if (on) {
>> @@ -770,6 +779,7 @@ static struct exynos_tmu_platform_data const
>> exynos_default_tmu_data = {
>>         .trigger_levels[0] = 85,
>>         .trigger_levels[1] = 103,
>>         .trigger_levels[2] = 110,
>> +       .trigger_levels[3] = 120,
>>         .trigger_level0_en = 1,
>>         .trigger_level1_en = 1,
>>         .trigger_level2_en = 1,
>> --
>> 1.7.4.1
>>
>> --
>> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
>> the body of a message to majordomo@xxxxxxxxxxxxxxx
>> More majordomo info at  http://vger.kernel.org/majordomo-info.html
>> Please read the FAQ at  http://www.tux.org/lkml/
>>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> the body of a message to majordomo@xxxxxxxxxxxxxxx
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
> Please read the FAQ at  http://www.tux.org/lkml/
>

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/