Re: [PATCH v3 2/3] spi / ACPI: add ACPI enumeration support

[Mika Westerberg]

On Tue, Nov 20, 2012 at 02:05:26PM +0100, Rafael J. Wysocki wrote:
> On Tuesday, November 20, 2012 12:29:43 PM Mika Westerberg wrote:
> > ACPI 5 introduced SPISerialBus resource that allows us to enumerate and
> > configure the SPI slave devices behind the SPI controller. This patch adds
> > support for this to the SPI core.
> > 
> > In addition we bind ACPI nodes to SPI devices. This makes it possible for
> > the slave drivers to get the ACPI handle for further configuration.
> > 
> > Signed-off-by: Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx>
> > ---
> >  drivers/spi/spi.c |  115 ++++++++++++++++++++++++++++++++++++++++++++++++++++-
> >  1 file changed, 114 insertions(+), 1 deletion(-)
> > 
> > diff --git a/drivers/spi/spi.c b/drivers/spi/spi.c
> > index 84c2861..3ae5351 100644
> > --- a/drivers/spi/spi.c
> > +++ b/drivers/spi/spi.c
> > @@ -35,6 +35,8 @@
> >  #include <linux/sched.h>
> >  #include <linux/delay.h>
> >  #include <linux/kthread.h>
> > +#include <linux/ioport.h>
> > +#include <linux/acpi.h>
> >  
> >  static void spidev_release(struct device *dev)
> >  {
> > @@ -93,6 +95,10 @@ static int spi_match_device(struct device *dev, struct device_driver *drv)
> >  	if (of_driver_match_device(dev, drv))
> >  		return 1;
> >  
> > +	/* Then try ACPI */
> > +	if (acpi_driver_match_device(dev, drv))
> > +		return 1;
> > +
> >  	if (sdrv->id_table)
> >  		return !!spi_match_id(sdrv->id_table, spi);
> >  
> > @@ -888,6 +894,112 @@ static void of_register_spi_devices(struct spi_master *master)
> >  static void of_register_spi_devices(struct spi_master *master) { }
> >  #endif
> >  
> > +#ifdef CONFIG_ACPI
> > +static int acpi_spi_add_resource(struct acpi_resource *ares, void *data)
> > +{
> > +	struct acpi_resource_spi_serialbus *sb;
> > +	struct spi_device *spi = data;
> > +	struct resource r;
> > +
> > +	switch (ares->type) {
> > +	case ACPI_RESOURCE_TYPE_IRQ:
> > +	case ACPI_RESOURCE_TYPE_EXTENDED_IRQ:
> 
> It is not necessary to check the resource type for IRQ resources here,
> because acpi_dev_resource_interrupt() will do it for you anyway. :-)
> 
> So, I would first check if the resource type is ACPI_RESOURCE_TYPE_SERIAL_BUS
> (and populate the spi_device fields if so) and then do something like this:
> 
> if (acpi_dev_resource_interrupt(ares, 0, &r)) {
> 	if (spi->irq < 0)
> 		spi->irq = r.start;
> 
> 	return 1;
> }
> 
> We don't even need to memset(), because we're not going to use that resource
> object going forward.

But doesn't acpi_dev_resource_interrupt() do acpi_register_gsi() and all
that stuff? And we were supposed to avoid that.

> 
> > +		/* Only use the first interrupt resource and skip the rest */
> > +		memset(&r, 0, sizeof(r));
> > +		if (spi->irq < 0 && acpi_dev_resource_interrupt(ares, 0, &r))
> > +			spi->irq = r.start;
> > +		return 1;
> > +
> > +	case ACPI_RESOURCE_TYPE_SERIAL_BUS:
> > +		sb = &ares->data.spi_serial_bus;
> > +		if (sb->type == ACPI_RESOURCE_SERIAL_TYPE_SPI) {
> > +			spi->chip_select = sb->device_selection;
> > +			spi->max_speed_hz = sb->connection_speed;
> > +
> > +			if (sb->clock_phase == ACPI_SPI_SECOND_PHASE)
> > +				spi->mode |= SPI_CPHA;
> > +			if (sb->clock_polarity == ACPI_SPI_START_HIGH)
> > +				spi->mode |= SPI_CPOL;
> > +			if (sb->device_polarity == ACPI_SPI_ACTIVE_HIGH)
> > +				spi->mode |= SPI_CS_HIGH;
> > +
> > +			return 1;
> > +		}
> > +		return 0;
> > +	}
> > +
> > +	return 0;
> 
> We're not interested in any resources except for the above, so I think we
> can just always return 1 from this function, or am I missing anything?

Right you are, we can return 1 always. I'll update this.

> > +}
> > +
> > +static acpi_status acpi_spi_add_device(acpi_handle handle, u32 level,
> > +				       void *data, void **return_value)
> > +{
> > +	struct spi_master *master = data;
> > +	struct list_head resource_list;
> > +	struct acpi_device *adev;
> > +	struct spi_device *spi;
> > +	int ret;
> > +
> > +	if (acpi_bus_get_device(handle, &adev))
> > +		return AE_OK;
> > +	if (acpi_bus_get_status(adev) || !adev->status.present)
> > +		return AE_OK;
> > +
> > +	spi = spi_alloc_device(master);
> > +	if (!spi) {
> > +		dev_err(&master->dev, "failed to allocate SPI device for %s\n",
> > +			dev_name(&adev->dev));
> > +		return AE_NO_MEMORY;
> > +	}
> > +
> > +	ACPI_HANDLE_SET(&spi->dev, handle);
> > +	spi->irq = -1;
> > +
> > +	INIT_LIST_HEAD(&resource_list);
> > +	ret = acpi_dev_get_resources(adev, &resource_list,
> > +				     acpi_spi_add_resource, spi);
> 
> acpi_dev_free_resource_list(&resource_list); can be done here (the list
> is going to be empty anyway if acpi_spi_add_resource() always returns 1)
> and then you won't need the fail_put_dev label.

OK, but there are still two cases below where we need to do
spi_dev_put(spi). Or do you mean that for each case I just call that
directly instead of goto fail_put_dev?

> > +	if (ret < 0)
> > +		goto fail_put_dev;
> > +
> > +	acpi_dev_free_resource_list(&resource_list);
> > +
> > +	if (!spi->max_speed_hz)
> > +		goto fail_put_dev;
> > +
> > +	strlcpy(spi->modalias, dev_name(&adev->dev), sizeof(spi->modalias));
> > +	if (spi_add_device(spi)) {
> > +		dev_err(&master->dev, "failed to add SPI device %s from ACPI\n",
> > +			dev_name(&adev->dev));
> > +		goto fail_put_dev;
> > +	}
> > +
> > +	return AE_OK;
> > +
> > +fail_put_dev:
> > +	spi_dev_put(spi);
> > +
> > +	return AE_OK;
> > +}
> > +
> > +static void acpi_register_spi_devices(struct spi_master *master)
> > +{
> > +	acpi_status status;
> > +	acpi_handle handle;
> > +
> > +	handle = ACPI_HANDLE(&master->dev);
> > +	if (!handle)
> > +		return;
> > +
> > +	status = acpi_walk_namespace(ACPI_TYPE_DEVICE, handle, 1,
> > +				     acpi_spi_add_device, NULL,
> > +				     master, NULL);
> > +	if (ACPI_FAILURE(status))
> > +		dev_warn(&master->dev, "failed to enumerate SPI slaves\n");
> > +}
> > +#else
> > +static inline void acpi_register_spi_devices(struct spi_master *master) {}
> > +#endif /* CONFIG_ACPI */
> > +
> >  static void spi_master_release(struct device *dev)
> >  {
> >  	struct spi_master *master;
> > @@ -1023,8 +1135,9 @@ int spi_register_master(struct spi_master *master)
> >  		spi_match_master_to_boardinfo(master, &bi->board_info);
> >  	mutex_unlock(&board_lock);
> >  
> > -	/* Register devices from the device tree */
> > +	/* Register devices from the device tree and ACPI */
> >  	of_register_spi_devices(master);
> > +	acpi_register_spi_devices(master);
> >  done:
> >  	return status;
> >  }
> 
> Thanks,
> Rafael
> 
> 
> -- 
> I speak only for myself.
> Rafael J. Wysocki, Intel Open Source Technology Center.
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/