Re: [PATCH v3] mfd: lpc_ich: Fix resource request for [mem0x00000000]

[Peter Hurley]

On Mon, 2012-11-19 at 18:46 +0100, Samuel Ortiz wrote:
> Hi Peter,
> 
> On Fri, Nov 09, 2012 at 06:55:29AM -0500, Peter Hurley wrote:
> > The older southbridges supported by the lpc_ich driver do not
> > provide memory-mapped space of the root complex. The driver
> > correctly avoids computing the iomem address in this case, yet
> > submits a zeroed resource request anyway (via mfd_add_devices()).
> > 
> > Remove the iomem resource from the resource array submitted to the
> > mfd core for the older southbridges.
> > 
> > Acked-by: Aaron Sierra <asierra@xxxxxxxxxxx>
> > Cc: Peter Tyser <ptyser@xxxxxxxxxxx>
> > Cc: Samuel Ortiz <sameo@xxxxxxxxxxxxxxx>
> > Signed-off-by: Peter Hurley <peter@xxxxxxxxxxxxxxxxxx>
> > ---
> > 
> > v2: post-decrement to match existing style
> >     retitle patch subject
> > v3: respin as standalone patch
> > 
> >  drivers/mfd/lpc_ich.c | 3 +++
> >  1 file changed, 3 insertions(+)
> > 
> > diff --git a/drivers/mfd/lpc_ich.c b/drivers/mfd/lpc_ich.c
> > index a22544f..f507c09 100644
> > --- a/drivers/mfd/lpc_ich.c
> > +++ b/drivers/mfd/lpc_ich.c
> > @@ -842,6 +842,9 @@ static int __devinit lpc_ich_init_wdt(struct pci_dev *dev,
> >  		res = wdt_mem_res(ICH_RES_MEM_GCS);
> >  		res->start = base_addr + ACPIBASE_GCS_OFF;
> >  		res->end = base_addr + ACPIBASE_GCS_END;
> > +	} else {
> So I suppose there is no v3 for the iTCO ? If we're expecting all versions
> after 1 to have a memory mapped region, we should have something like:
> 
> --- a/drivers/mfd/lpc_ich.c
> +++ b/drivers/mfd/lpc_ich.c
> @@ -830,7 +830,10 @@ static int __devinit lpc_ich_init_wdt(struct pci_dev
> *dev,
>          * we have to read RCBA from PCI Config space 0xf0 and use
>          * it as base. GCS = RCBA + ICH6_GCS(0x3410).
>          */
> -       if (lpc_chipset_info[id->driver_data].iTCO_version == 2) {
> +       if (lpc_chipset_info[id->driver_data].iTCO_version == 1) {
> +               /* Don't register iomem for TCO ver 1 */
> +               lpc_ich_cells[LPC_WDT].num_resources--;
> +       } else {
>                 pci_read_config_dword(dev, RCBABASE, &base_addr_cfg);
>                 base_addr = base_addr_cfg & 0xffffc000;
>                 if (!(base_addr_cfg & 1)) {

Hi Samuel,

I have no objection to your version.

FWIW, the iTCO_version field is exclusively a driver construct used to
differentiate southbridges that support memory-mapped I/O to the TCO
registers from those that only support port-based I/O. IOW, there's no
intrinsic meaning to the values and could be represented with a bool
type instead.

Regards,
Peter Hurley

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/