Re: [PATCH] PCI: Fix bit definitions of PCI_EXP_LNKCAP2 register

[Bjorn Helgaas]

On Thu, Nov 8, 2012 at 11:56 PM, Jingoo Han <jg1.han@xxxxxxxxxxx> wrote:
> According to the PCIe 3.0 spec, PCI_EXP_LNKCAP2_SLS_2_5GB is
> 1st bit of PCI_EXP_LNKCAP2 register, not 0th bit. So, the bit
> definition of supported link speed vector should be fixed.
>
> Signed-off-by: Jingoo Han <jg1.han@xxxxxxxxxxx>
> ---
>  include/uapi/linux/pci_regs.h |    6 +++---
>  1 files changed, 3 insertions(+), 3 deletions(-)
>
> diff --git a/include/uapi/linux/pci_regs.h b/include/uapi/linux/pci_regs.h
> index 20ae747..14a3184 100644
> --- a/include/uapi/linux/pci_regs.h
> +++ b/include/uapi/linux/pci_regs.h
> @@ -544,9 +544,9 @@
>  #define  PCI_EXP_OBFF_WAKE_EN  0x6000  /* OBFF using WAKE# signaling */
>  #define PCI_CAP_EXP_ENDPOINT_SIZEOF_V2 44      /* v2 endpoints end here */
>  #define PCI_EXP_LNKCAP2                44      /* Link Capability 2 */
> -#define  PCI_EXP_LNKCAP2_SLS_2_5GB 0x01        /* Current Link Speed 2.5GT/s */
> -#define  PCI_EXP_LNKCAP2_SLS_5_0GB 0x02        /* Current Link Speed 5.0GT/s */
> -#define  PCI_EXP_LNKCAP2_SLS_8_0GB 0x04        /* Current Link Speed 8.0GT/s */
> +#define  PCI_EXP_LNKCAP2_SLS_2_5GB 0x02        /* Current Link Speed 2.5GT/s */
> +#define  PCI_EXP_LNKCAP2_SLS_5_0GB 0x04        /* Current Link Speed 5.0GT/s */
> +#define  PCI_EXP_LNKCAP2_SLS_8_0GB 0x08        /* Current Link Speed 8.0GT/s */
>  #define  PCI_EXP_LNKCAP2_CROSSLINK 0x100 /* Crosslink supported */
>  #define PCI_EXP_LNKCTL2                48      /* Link Control 2 */
>  #define PCI_EXP_LNKSTA2                50      /* Link Status 2 */

I think this patch is correct, per spec sec 7.8.18.  If I apply it, I
think the comments should also be changed to "Supported Link Speed"
instead of "Current."

The only in-tree user of these symbols is
drm_pcie_get_speed_cap_mask().  Dave, can you ack/nack this?  I don't
want to apply this if it's going to break something there.

Bjorn
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/