[PATCH 3/4] mmc: core: sd.c: Modified pr_warning to pr_warn

[Sangho Yi]

Fixed the coding style warning;
from pr_warning(...) to pr_warn(...)

Signed-off-by: Sangho Yi <antiroot@xxxxxxxxx>
---
 drivers/mmc/core/sd.c |   41 ++++++++++++++++++++---------------------
 1 file changed, 20 insertions(+), 21 deletions(-)

diff --git a/drivers/mmc/core/sd.c b/drivers/mmc/core/sd.c
index 7c6b38e..0622b9b 100644
--- a/drivers/mmc/core/sd.c
+++ b/drivers/mmc/core/sd.c
@@ -219,7 +219,7 @@ static int mmc_read_ssr(struct mmc_card *card)
 	u32 *ssr;
 
 	if (!(card->csd.cmdclass & CCC_APP_SPEC)) {
-		pr_warning("%s: card lacks mandatory SD Status "
+		pr_warn("%s: card lacks mandatory SD Status "
 			"function.\n", mmc_hostname(card->host));
 		return 0;
 	}
@@ -230,7 +230,7 @@ static int mmc_read_ssr(struct mmc_card *card)
 
 	err = mmc_app_sd_status(card, ssr);
 	if (err) {
-		pr_warning("%s: problem reading SD Status "
+		pr_warn("%s: problem reading SD Status "
 			"register.\n", mmc_hostname(card->host));
 		err = 0;
 		goto out;
@@ -254,7 +254,7 @@ static int mmc_read_ssr(struct mmc_card *card)
 			card->ssr.erase_offset = eo * 1000;
 		}
 	} else {
-		pr_warning("%s: SD Status: Invalid Allocation Unit "
+		pr_warn("%s: SD Status: Invalid Allocation Unit "
 			"size.\n", mmc_hostname(card->host));
 	}
 out:
@@ -274,7 +274,7 @@ static int mmc_read_switch(struct mmc_card *card)
 		return 0;
 
 	if (!(card->csd.cmdclass & CCC_SWITCH)) {
-		pr_warning("%s: card lacks mandatory switch "
+		pr_warn("%s: card lacks mandatory switch "
 			"function, performance might suffer.\n",
 			mmc_hostname(card->host));
 		return 0;
@@ -304,8 +304,8 @@ static int mmc_read_switch(struct mmc_card *card)
 		if (err != -EINVAL && err != -ENOSYS && err != -EFAULT)
 			goto out;
 
-		pr_warning("%s: problem reading Bus Speed modes.\n",
-			   mmc_hostname(card->host));
+		pr_warn("%s: problem reading Bus Speed modes.\n",
+			mmc_hostname(card->host));
 		err = 0;
 
 		goto out;
@@ -360,8 +360,7 @@ int mmc_sd_switch_hs(struct mmc_card *card)
 		goto out;
 
 	if ((status[16] & 0xF) != 1) {
-		pr_warning("%s: Problem switching card "
-			"into high-speed mode!\n",
+		pr_warn("%s: Problem switching card into high-speed mode!\n",
 			mmc_hostname(card->host));
 		err = 0;
 	} else {
@@ -428,8 +427,8 @@ static int sd_select_driver_type(struct mmc_card *card, u8 *status)
 		return err;
 
 	if ((status[15] & 0xF) != drive_strength) {
-		pr_warning("%s: Problem setting drive strength!\n",
-			   mmc_hostname(card->host));
+		pr_warn("%s: Problem setting drive strength!\n",
+			mmc_hostname(card->host));
 		return 0;
 	}
 
@@ -507,8 +506,8 @@ static int sd_set_bus_speed_mode(struct mmc_card *card, u8 *status)
 		return err;
 
 	if ((status[16] & 0xF) != card->sd_bus_speed)
-		pr_warning("%s: Problem setting bus speed mode!\n",
-			   mmc_hostname(card->host));
+		pr_warn("%s: Problem setting bus speed mode!\n",
+			mmc_hostname(card->host));
 	else {
 		mmc_set_timing(card->host, timing);
 		mmc_set_clock(card->host, card->sw_caps.uhs_max_dtr);
@@ -587,8 +586,8 @@ static int sd_set_current_limit(struct mmc_card *card, u8 *status)
 			return err;
 
 		if (((status[15] >> 4) & 0x0F) != current_limit)
-			pr_warning("%s: Problem setting current limit!\n",
-				   mmc_hostname(card->host));
+			pr_warn("%s: Problem setting current limit!\n",
+				mmc_hostname(card->host));
 
 	}
 
@@ -852,7 +851,7 @@ int mmc_sd_setup_card(struct mmc_host *host, struct mmc_card *card,
 		}
 
 		if (ro < 0) {
-			pr_warning("%s: host does not "
+			pr_warn("%s: host does not "
 				"support reading read-only "
 				"switch. assuming write-enable.\n",
 				mmc_hostname(host));
@@ -1179,17 +1178,17 @@ int mmc_attach_sd(struct mmc_host *host)
 	 * support.
 	 */
 	if (ocr & 0x7F) {
-		pr_warning("%s: card claims to support voltages "
-		       "below the defined range. These will be ignored.\n",
-		       mmc_hostname(host));
+		pr_warn("%s: card claims to support voltages "
+			"below the defined range. These will be ignored.\n",
+			mmc_hostname(host));
 		ocr &= ~0x7F;
 	}
 
 	if ((ocr & MMC_VDD_165_195) &&
 	    !(host->ocr_avail_sd & MMC_VDD_165_195)) {
-		pr_warning("%s: SD card claims to support the "
-		       "incompletely defined 'low voltage range'. This "
-		       "will be ignored.\n", mmc_hostname(host));
+		pr_warn("%s: SD card claims to support the "
+			"incompletely defined 'low voltage range'. This "
+			"will be ignored.\n", mmc_hostname(host));
 		ocr &= ~MMC_VDD_165_195;
 	}
 
-- 
1.7.9.5

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/