[PATCH] usb: host: xhci: Fix Compliance Mode on SN65LVPE502CP Hardware

From: Alexis Cortes
Date: Tue Jul 31 2012 - 17:19:40 EST


This patch is intended to work around a known issue on the
SN65LVPE502CP USB3.0 re-driver that can delay the negotiation
between a device and the host past the usual handshake timeout,
and if that happens on the first insertion, the host controller
port will enter in Compliance Mode as per xHCI Spec. The patch
creates a timer which polls every 2 seconds the link state of each
host controller's port (this by reading the PORTSC register) and
recovers the port by issuing a Warm reset every time Compliance mode
is detected.

Signed-off-by: Alexis R. Cortes <alexis.cortes@xxxxxx>
---
drivers/usb/host/xhci-hub.c | 27 ++++++++++++++
drivers/usb/host/xhci.c | 81
+++++++++++++++++++++++++++++++++++++++++++
drivers/usb/host/xhci.h | 6 +++
3 files changed, 114 insertions(+), 0 deletions(-)

diff --git a/drivers/usb/host/xhci-hub.c b/drivers/usb/host/xhci-hub.c
index 7b01094..4ea498d 100644
--- a/drivers/usb/host/xhci-hub.c
+++ b/drivers/usb/host/xhci-hub.c
@@ -493,7 +493,19 @@ static void xhci_hub_report_link_state(u32 *status,
u32 status_reg)
* when this bit is set.
*/
pls |= USB_PORT_STAT_CONNECTION;
+ } else {
+ /*
+ * If CAS bit isn't set but the Port is already at
+ * Compliance Mode, fake a connection so the USB core
+ * notices the Compliance state and resets the port.
+ * This resolves an issue generated by the SN65LVPE502CP
+ * in which sometimes the port enters compliance mode
+ * caused by a delay on the host-device negotiation.
+ */
+ if (pls == USB_SS_PORT_LS_COMP_MOD)
+ pls |= USB_PORT_STAT_CONNECTION;
}
+
/* update status field */
*status |= pls;
}
@@ -645,6 +657,21 @@ int xhci_hub_control(struct usb_hcd *hcd, u16
typeReq, u16 wValue,
/* Update Port Link State for super speed ports*/
if (hcd->speed == HCD_USB3) {
xhci_hub_report_link_state(&status, temp);
+ /*
+ * Verify if all USB3 Ports Have entered U0. Delete compliance
+ * mode timer if so.
+ */
+ if (xhci->quirks & XHCI_COMP_MODE_QUIRK) {
+ if (xhci->port_status_u0 != ((1 << xhci->num_usb3_ports)-1)) {
+ if ((temp & PORT_PLS_MASK) == XDEV_U0)
+ xhci->port_status_u0 |= 1 << wIndex;
+ } else {
+ /* Deleting Compliance Mode Recovery Timer */
+ if (del_timer_sync(&xhci->comp_mode_recovery_timer))
+ xhci_dbg(xhci, "Compliance Mode Recovery Timer Deleted. "
+ "All USB3 ports have entered U0 at least once.\n");
+ }
+ }
}
if (bus_state->port_c_suspend & (1 << wIndex))
status |= 1 << USB_PORT_FEAT_C_SUSPEND;
diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c
index a979cd0..d1f1cda 100644
--- a/drivers/usb/host/xhci.c
+++ b/drivers/usb/host/xhci.c
@@ -26,6 +26,7 @@
#include <linux/module.h>
#include <linux/moduleparam.h>
#include <linux/slab.h>
+#include <linux/dmi.h>

#include "xhci.h"

@@ -397,6 +398,62 @@ static void xhci_msix_sync_irqs(struct xhci_hcd *xhci)

#endif

+static void compliance_mode_recovery(unsigned long arg)
+{
+ struct xhci_hcd *xhci;
+ struct usb_hcd *hcd;
+ u32 temp;
+ int i;
+
+ xhci = (struct xhci_hcd *)arg;
+
+ for (i = 0; i < xhci->num_usb3_ports; i++) {
+ temp = xhci_readl(xhci, xhci->usb3_ports[i]);
+ if ((temp & PORT_PLS_MASK) == USB_SS_PORT_LS_COMP_MOD) {
+ /* Compliance Mode Detected. Letting USB Core handle the Warm Reset */
+ xhci_dbg(xhci, "Compliance Mode Detected on port %d! Attempting
recovery routine.\n", i + 1);
+ hcd = xhci->shared_hcd;
+
+ if (hcd->state == HC_STATE_SUSPENDED)
+ usb_hcd_resume_root_hub(hcd);
+
+ usb_hcd_poll_rh_status(hcd);
+ }
+ }
+
+ if (xhci->port_status_u0 != ((1 << xhci->num_usb3_ports)-1))
+ mod_timer(&xhci->comp_mode_recovery_timer, jiffies +
msecs_to_jiffies(COMP_MODE_RCVRY_MSECS));
+}
+
+static void compliance_mode_recovery_timer_init(struct xhci_hcd *xhci)
+{
+ xhci->port_status_u0 = 0;
+ init_timer(&xhci->comp_mode_recovery_timer);
+ xhci->comp_mode_recovery_timer.data = (unsigned long) xhci;
+ xhci->comp_mode_recovery_timer.function = compliance_mode_recovery;
+ xhci->comp_mode_recovery_timer.expires = jiffies +
msecs_to_jiffies(COMP_MODE_RCVRY_MSECS);
+ set_timer_slack(&xhci->comp_mode_recovery_timer,
msecs_to_jiffies(COMP_MODE_RCVRY_MSECS));
+ add_timer(&xhci->comp_mode_recovery_timer);
+ xhci_dbg(xhci, "Compliance Mode Recovery Timer Initialized.\n");
+}
+
+static bool compliance_mode_recovery_timer_quirk_check(void)
+{
+ const char *dmi_product_name, *dmi_sys_vendor;
+
+ dmi_product_name = dmi_get_system_info(DMI_PRODUCT_NAME);
+ dmi_sys_vendor = dmi_get_system_info(DMI_SYS_VENDOR);
+
+ if (strstr(dmi_sys_vendor, "Hewlett-Packard")) {
+ if (strstr(dmi_product_name, "Z420") || strstr(dmi_product_name,
"Z620") ||
+ strstr(dmi_product_name, "Z820")) {
+ return true;
+ }
+ }
+
+ return false;
+}
+
/*
* Initialize memory for HCD and xHC (one-time init).
*
@@ -420,6 +477,12 @@ int xhci_init(struct usb_hcd *hcd)
retval = xhci_mem_init(xhci, GFP_KERNEL);
xhci_dbg(xhci, "Finished xhci_init\n");

+ /* Initializing Compliance Mode Recovery Data If Needed */
+ if (compliance_mode_recovery_timer_quirk_check()) {
+ xhci->quirks |= XHCI_COMP_MODE_QUIRK;
+ compliance_mode_recovery_timer_init(xhci);
+ }
+
return retval;
}

@@ -628,6 +691,10 @@ void xhci_stop(struct usb_hcd *hcd)
del_timer_sync(&xhci->event_ring_timer);
#endif

+ /* Deleting Compliance Mode Recovery Timer */
+ if (xhci->quirks & XHCI_COMP_MODE_QUIRK)
+ del_timer_sync(&xhci->comp_mode_recovery_timer);
+
if (xhci->quirks & XHCI_AMD_PLL_FIX)
usb_amd_dev_put();

@@ -802,6 +869,15 @@ int xhci_suspend(struct xhci_hcd *xhci)
}
spin_unlock_irq(&xhci->lock);

+ /*
+ * Deleting Compliance Mode Recovery Timer because the xHCI Host
+ * is about to be suspended.
+ */
+ if (xhci->quirks & XHCI_COMP_MODE_QUIRK) {
+ del_timer_sync(&xhci->comp_mode_recovery_timer);
+ xhci_dbg(xhci, "Compliance Mode Recovery Timer Deleted - xHC
suspended\n");
+ }
+
/* step 5: remove core well power */
/* synchronize irq when using MSI-X */
xhci_msix_sync_irqs(xhci);
@@ -934,6 +1010,11 @@ int xhci_resume(struct xhci_hcd *xhci, bool
hibernated)
usb_hcd_resume_root_hub(hcd);
usb_hcd_resume_root_hub(xhci->shared_hcd);
}
+
+ /* Initializing Compliance Mode Recovery Timer */
+ if (xhci->quirks & XHCI_COMP_MODE_QUIRK)
+ compliance_mode_recovery_timer_init(xhci);
+
return retval;
}
#endif /* CONFIG_PM */
diff --git a/drivers/usb/host/xhci.h b/drivers/usb/host/xhci.h
index 55c0785..f1e7874 100644
--- a/drivers/usb/host/xhci.h
+++ b/drivers/usb/host/xhci.h
@@ -1494,6 +1494,7 @@ struct xhci_hcd {
#define XHCI_TRUST_TX_LENGTH (1 << 10)
#define XHCI_LPM_SUPPORT (1 << 11)
#define XHCI_INTEL_HOST (1 << 12)
+#define XHCI_COMP_MODE_QUIRK (1 << 13)
unsigned int num_active_eps;
unsigned int limit_active_eps;
/* There are two roothubs to keep track of bus suspend info for */
@@ -1510,6 +1511,11 @@ struct xhci_hcd {
unsigned sw_lpm_support:1;
/* support xHCI 1.0 spec USB2 hardware LPM */
unsigned hw_lpm_support:1;
+ /* Compliance Mode Recovery Data */
+ struct timer_list comp_mode_recovery_timer;
+ u32 port_status_u0;
+/* Compliance Mode Timer Triggered every 2 seconds */
+#define COMP_MODE_RCVRY_MSECS 2000
};

/* convert between an HCD pointer and the corresponding EHCI_HCD */
--
1.7.1

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/