[PATCH 06/12] 8250: use the 8250 register interface not the legacy one

From: Alan Cox
Date: Fri Jun 22 2012 - 11:27:51 EST

From: Alan Cox <alan@xxxxxxxxxxxxxxx>

The old interface just copies bits over and calls the newer one.
In addition we can now pass more information.

Signed-off-by: Alan Cox <alan@xxxxxxxxxxxxxxx>
---

drivers/tty/serial/8250/8250.c | 71 +++++++++-----------------
drivers/tty/serial/8250/8250_acorn.c | 22 ++++----
drivers/tty/serial/8250/8250_dw.c | 38 +++++++-------
drivers/tty/serial/8250/8250_gsc.c | 26 +++++-----
drivers/tty/serial/8250/8250_hp300.c | 26 +++++-----
drivers/tty/serial/8250/8250_pci.c | 92 +++++++++++++++++-----------------
drivers/tty/serial/8250/8250_pnp.c | 28 +++++-----
drivers/tty/serial/8250/serial_cs.c | 30 ++++++-----
include/linux/serial_8250.h | 1
9 files changed, 155 insertions(+), 179 deletions(-)

diff --git a/drivers/tty/serial/8250/8250.c b/drivers/tty/serial/8250/8250.c
index 47d061b..5e3f6a3 100644
--- a/drivers/tty/serial/8250/8250.c
+++ b/drivers/tty/serial/8250/8250.c
@@ -2971,36 +2971,36 @@ void serial8250_resume_port(int line)
static int __devinit serial8250_probe(struct platform_device *dev)
{
struct plat_serial8250_port *p = dev->dev.platform_data;
- struct uart_port port;
+ struct uart_8250_port uart;
int ret, i, irqflag = 0;

- memset(&port, 0, sizeof(struct uart_port));
+ memset(&uart, 0, sizeof(uart));

if (share_irqs)
irqflag = IRQF_SHARED;

for (i = 0; p && p->flags != 0; p++, i++) {
- port.iobase = p->iobase;
- port.membase = p->membase;
- port.irq = p->irq;
- port.irqflags = p->irqflags;
- port.uartclk = p->uartclk;
- port.regshift = p->regshift;
- port.iotype = p->iotype;
- port.flags = p->flags;
- port.mapbase = p->mapbase;
- port.hub6 = p->hub6;
- port.private_data = p->private_data;
- port.type = p->type;
- port.serial_in = p->serial_in;
- port.serial_out = p->serial_out;
- port.handle_irq = p->handle_irq;
- port.handle_break = p->handle_break;
- port.set_termios = p->set_termios;
- port.pm = p->pm;
- port.dev = &dev->dev;
- port.irqflags |= irqflag;
- ret = serial8250_register_port(&port);
+ uart.port.iobase = p->iobase;
+ uart.port.membase = p->membase;
+ uart.port.irq = p->irq;
+ uart.port.irqflags = p->irqflags;
+ uart.port.uartclk = p->uartclk;
+ uart.port.regshift = p->regshift;
+ uart.port.iotype = p->iotype;
+ uart.port.flags = p->flags;
+ uart.port.mapbase = p->mapbase;
+ uart.port.hub6 = p->hub6;
+ uart.port.private_data = p->private_data;
+ uart.port.type = p->type;
+ uart.port.serial_in = p->serial_in;
+ uart.port.serial_out = p->serial_out;
+ uart.port.handle_irq = p->handle_irq;
+ uart.port.handle_break = p->handle_break;
+ uart.port.set_termios = p->set_termios;
+ uart.port.pm = p->pm;
+ uart.port.dev = &dev->dev;
+ uart.port.irqflags |= irqflag;
+ ret = serial8250_register_8250_port(&uart);
if (ret < 0) {
dev_err(&dev->dev, "unable to register port at index %d "
"(IO%lx MEM%llx IRQ%d): %d\n", i,
@@ -3073,7 +3073,7 @@ static struct platform_driver serial8250_isa_driver = {
static struct platform_device *serial8250_isa_devs;

/*
- * serial8250_register_port and serial8250_unregister_port allows for
+ * serial8250_register_8250_port and serial8250_unregister_port allows for
* 16x50 serial ports to be configured at run-time, to support PCMCIA
* modems and PCI multiport cards.
*/
@@ -3190,29 +3190,6 @@ int serial8250_register_8250_port(struct uart_8250_port *up)
EXPORT_SYMBOL(serial8250_register_8250_port);

/**
- * serial8250_register_port - register a serial port
- * @port: serial port template
- *
- * Configure the serial port specified by the request. If the
- * port exists and is in use, it is hung up and unregistered
- * first.
- *
- * The port is then probed and if necessary the IRQ is autodetected
- * If this fails an error is returned.
- *
- * On success the port is ready to use and the line number is returned.
- */
-int serial8250_register_port(struct uart_port *port)
-{
- struct uart_8250_port up;
-
- memset(&up, 0, sizeof(up));
- memcpy(&up.port, port, sizeof(*port));
- return serial8250_register_8250_port(&up);
-}
-EXPORT_SYMBOL(serial8250_register_port);
-
-/**
* serial8250_unregister_port - remove a 16x50 serial port at runtime
* @line: serial line number
*
diff --git a/drivers/tty/serial/8250/8250_acorn.c b/drivers/tty/serial/8250/8250_acorn.c
index b0ce8c5..8574983 100644
--- a/drivers/tty/serial/8250/8250_acorn.c
+++ b/drivers/tty/serial/8250/8250_acorn.c
@@ -43,7 +43,7 @@ serial_card_probe(struct expansion_card *ec, const struct ecard_id *id)
{
struct serial_card_info *info;
struct serial_card_type *type = id->data;
- struct uart_port port;
+ struct uart_8250_port uart;
unsigned long bus_addr;
unsigned int i;

@@ -62,19 +62,19 @@ serial_card_probe(struct expansion_card *ec, const struct ecard_id *id)

ecard_set_drvdata(ec, info);

- memset(&port, 0, sizeof(struct uart_port));
- port.irq = ec->irq;
- port.flags = UPF_BOOT_AUTOCONF | UPF_SHARE_IRQ;
- port.uartclk = type->uartclk;
- port.iotype = UPIO_MEM;
- port.regshift = 2;
- port.dev = &ec->dev;
+ memset(&uart, 0, sizeof(struct uart_8250_port));
+ uart.port.irq = ec->irq;
+ uart.port.flags = UPF_BOOT_AUTOCONF | UPF_SHARE_IRQ;
+ uart.port.uartclk = type->uartclk;
+ uart.port.iotype = UPIO_MEM;
+ uart.port.regshift = 2;
+ uart.port.dev = &ec->dev;

for (i = 0; i < info->num_ports; i ++) {
- port.membase = info->vaddr + type->offset[i];
- port.mapbase = bus_addr + type->offset[i];
+ uart.port.membase = info->vaddr + type->offset[i];
+ uart.port.mapbase = bus_addr + type->offset[i];

- info->ports[i] = serial8250_register_port(&port);
+ info->ports[i] = serial8250_register_8250_port(&uart);
}

return 0;
diff --git a/drivers/tty/serial/8250/8250_dw.c b/drivers/tty/serial/8250/8250_dw.c
index f574eef..afb955f 100644
--- a/drivers/tty/serial/8250/8250_dw.c
+++ b/drivers/tty/serial/8250/8250_dw.c
@@ -89,7 +89,7 @@ static int dw8250_handle_irq(struct uart_port *p)

static int __devinit dw8250_probe(struct platform_device *pdev)
{
- struct uart_port port = {};
+ struct uart_8250_port uart = {};
struct resource *regs = platform_get_resource(pdev, IORESOURCE_MEM, 0);
struct resource *irq = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
struct device_node *np = pdev->dev.of_node;
@@ -104,28 +104,28 @@ static int __devinit dw8250_probe(struct platform_device *pdev)
data = devm_kzalloc(&pdev->dev, sizeof(*data), GFP_KERNEL);
if (!data)
return -ENOMEM;
- port.private_data = data;
-
- spin_lock_init(&port.lock);
- port.mapbase = regs->start;
- port.irq = irq->start;
- port.handle_irq = dw8250_handle_irq;
- port.type = PORT_8250;
- port.flags = UPF_SHARE_IRQ | UPF_BOOT_AUTOCONF | UPF_IOREMAP |
+ uart.port.private_data = data;
+
+ spin_lock_init(&uart.port.lock);
+ uart.port.mapbase = regs->start;
+ uart.port.irq = irq->start;
+ uart.port.handle_irq = dw8250_handle_irq;
+ uart.port.type = PORT_8250;
+ uart.port.flags = UPF_SHARE_IRQ | UPF_BOOT_AUTOCONF | UPF_IOREMAP |
UPF_FIXED_PORT | UPF_FIXED_TYPE;
- port.dev = &pdev->dev;
+ uart.port.dev = &pdev->dev;

- port.iotype = UPIO_MEM;
- port.serial_in = dw8250_serial_in;
- port.serial_out = dw8250_serial_out;
+ uart.port.iotype = UPIO_MEM;
+ uart.port.serial_in = dw8250_serial_in;
+ uart.port.serial_out = dw8250_serial_out;
if (!of_property_read_u32(np, "reg-io-width", &val)) {
switch (val) {
case 1:
break;
case 4:
- port.iotype = UPIO_MEM32;
- port.serial_in = dw8250_serial_in32;
- port.serial_out = dw8250_serial_out32;
+ uart.port.iotype = UPIO_MEM32;
+ uart.port.serial_in = dw8250_serial_in32;
+ uart.port.serial_out = dw8250_serial_out32;
break;
default:
dev_err(&pdev->dev, "unsupported reg-io-width (%u)\n",
@@ -135,15 +135,15 @@ static int __devinit dw8250_probe(struct platform_device *pdev)
}

if (!of_property_read_u32(np, "reg-shift", &val))
- port.regshift = val;
+ uart.port.regshift = val;

if (of_property_read_u32(np, "clock-frequency", &val)) {
dev_err(&pdev->dev, "no clock-frequency property set\n");
return -EINVAL;
}
- port.uartclk = val;
+ uart.uart.port.uartclk = val;

- data->line = serial8250_register_port(&port);
+ data->line = serial8250_register_8250_port(&uart);
if (data->line < 0)
return data->line;

diff --git a/drivers/tty/serial/8250/8250_gsc.c b/drivers/tty/serial/8250/8250_gsc.c
index d8c0ffb..097dff9 100644
--- a/drivers/tty/serial/8250/8250_gsc.c
+++ b/drivers/tty/serial/8250/8250_gsc.c
@@ -26,7 +26,7 @@

static int __init serial_init_chip(struct parisc_device *dev)
{
- struct uart_port port;
+ struct uart_8250_port uart;
unsigned long address;
int err;

@@ -48,21 +48,21 @@ static int __init serial_init_chip(struct parisc_device *dev)
if (dev->id.sversion != 0x8d)
address += 0x800;

- memset(&port, 0, sizeof(port));
- port.iotype = UPIO_MEM;
+ memset(&uart, 0, sizeof(uart));
+ uart.port.iotype = UPIO_MEM;
/* 7.272727MHz on Lasi. Assumed the same for Dino, Wax and Timi. */
- port.uartclk = 7272727;
- port.mapbase = address;
- port.membase = ioremap_nocache(address, 16);
- port.irq = dev->irq;
- port.flags = UPF_BOOT_AUTOCONF;
- port.dev = &dev->dev;
-
- err = serial8250_register_port(&port);
+ uart.port.uartclk = 7272727;
+ uart.port.mapbase = address;
+ uart.port.membase = ioremap_nocache(address, 16);
+ uart.port.irq = dev->irq;
+ uart.port.flags = UPF_BOOT_AUTOCONF;
+ uart.port.dev = &dev->dev;
+
+ err = serial8250_register_8250_port(&uart);
if (err < 0) {
printk(KERN_WARNING
- "serial8250_register_port returned error %d\n", err);
- iounmap(port.membase);
+ "serial8250_register_8250_port returned error %d\n", err);
+ iounmap(uart.port.membase);
return err;
}

diff --git a/drivers/tty/serial/8250/8250_hp300.c b/drivers/tty/serial/8250/8250_hp300.c
index c13438c..8f1dd2c 100644
--- a/drivers/tty/serial/8250/8250_hp300.c
+++ b/drivers/tty/serial/8250/8250_hp300.c
@@ -171,7 +171,7 @@ static int __devinit hpdca_init_one(struct dio_dev *d,
return 0;
}
#endif
- memset(&port, 0, sizeof(struct uart_port));
+ memset(&uart, 0, sizeof(uart));

/* Memory mapped I/O */
port.iotype = UPIO_MEM;
@@ -182,7 +182,7 @@ static int __devinit hpdca_init_one(struct dio_dev *d,
port.membase = (char *)(port.mapbase + DIO_VIRADDRBASE);
port.regshift = 1;
port.dev = &d->dev;
- line = serial8250_register_port(&port);
+ line = serial8250_register_8250_port(&uart);

if (line < 0) {
printk(KERN_NOTICE "8250_hp300: register_serial() DCA scode %d"
@@ -210,7 +210,7 @@ static int __init hp300_8250_init(void)
#ifdef CONFIG_HPAPCI
int line;
unsigned long base;
- struct uart_port uport;
+ struct uart_8250_port uart;
struct hp300_port *port;
int i;
#endif
@@ -248,26 +248,26 @@ static int __init hp300_8250_init(void)
if (!port)
return -ENOMEM;

- memset(&uport, 0, sizeof(struct uart_port));
+ memset(&uart, 0, sizeof(uart));

base = (FRODO_BASE + FRODO_APCI_OFFSET(i));

/* Memory mapped I/O */
- uport.iotype = UPIO_MEM;
- uport.flags = UPF_SKIP_TEST | UPF_SHARE_IRQ \
+ uart.port.iotype = UPIO_MEM;
+ uart.port.flags = UPF_SKIP_TEST | UPF_SHARE_IRQ \
| UPF_BOOT_AUTOCONF;
/* XXX - no interrupt support yet */
- uport.irq = 0;
- uport.uartclk = HPAPCI_BAUD_BASE * 16;
- uport.mapbase = base;
- uport.membase = (char *)(base + DIO_VIRADDRBASE);
- uport.regshift = 2;
+ uart.port.irq = 0;
+ uart.port.uartclk = HPAPCI_BAUD_BASE * 16;
+ uart.port.mapbase = base;
+ uart.port.membase = (char *)(base + DIO_VIRADDRBASE);
+ uart.port.regshift = 2;

- line = serial8250_register_port(&uport);
+ line = serial8250_register_8250_port(&uart);

if (line < 0) {
printk(KERN_NOTICE "8250_hp300: register_serial() APCI"
- " %d irq %d failed\n", i, uport.irq);
+ " %d irq %d failed\n", i, uart.port.irq);
kfree(port);
continue;
}
diff --git a/drivers/tty/serial/8250/8250_pci.c b/drivers/tty/serial/8250/8250_pci.c
index 28e7c7c..7269b15 100644
--- a/drivers/tty/serial/8250/8250_pci.c
+++ b/drivers/tty/serial/8250/8250_pci.c
@@ -44,7 +44,7 @@ struct pci_serial_quirk {
int (*init)(struct pci_dev *dev);
int (*setup)(struct serial_private *,
const struct pciserial_board *,
- struct uart_port *, int);
+ struct uart_8250_port *, int);
void (*exit)(struct pci_dev *dev);
};

@@ -59,7 +59,7 @@ struct serial_private {
};

static int pci_default_setup(struct serial_private*,
- const struct pciserial_board*, struct uart_port*, int);
+ const struct pciserial_board*, struct uart_8250_port *, int);

static void moan_device(const char *str, struct pci_dev *dev)
{
@@ -74,7 +74,7 @@ static void moan_device(const char *str, struct pci_dev *dev)
}

static int
-setup_port(struct serial_private *priv, struct uart_port *port,
+setup_port(struct serial_private *priv, struct uart_8250_port *port,
int bar, int offset, int regshift)
{
struct pci_dev *dev = priv->dev;
@@ -93,17 +93,17 @@ setup_port(struct serial_private *priv, struct uart_port *port,
if (!priv->remapped_bar[bar])
return -ENOMEM;

- port->iotype = UPIO_MEM;
- port->iobase = 0;
- port->mapbase = base + offset;
- port->membase = priv->remapped_bar[bar] + offset;
- port->regshift = regshift;
+ port->port.iotype = UPIO_MEM;
+ port->port.iobase = 0;
+ port->port.mapbase = base + offset;
+ port->port.membase = priv->remapped_bar[bar] + offset;
+ port->port.regshift = regshift;
} else {
- port->iotype = UPIO_PORT;
- port->iobase = base + offset;
- port->mapbase = 0;
- port->membase = NULL;
- port->regshift = 0;
+ port->port.iotype = UPIO_PORT;
+ port->port.iobase = base + offset;
+ port->port.mapbase = 0;
+ port->port.membase = NULL;
+ port->port.regshift = 0;
}
return 0;
}
@@ -113,7 +113,7 @@ setup_port(struct serial_private *priv, struct uart_port *port,
*/
static int addidata_apci7800_setup(struct serial_private *priv,
const struct pciserial_board *board,
- struct uart_port *port, int idx)
+ struct uart_8250_port *port, int idx)
{
unsigned int bar = 0, offset = board->first_offset;
bar = FL_GET_BASE(board->flags);
@@ -140,7 +140,7 @@ static int addidata_apci7800_setup(struct serial_private *priv,
*/
static int
afavlab_setup(struct serial_private *priv, const struct pciserial_board *board,
- struct uart_port *port, int idx)
+ struct uart_8250_port *port, int idx)
{
unsigned int bar, offset = board->first_offset;

@@ -195,7 +195,7 @@ static int pci_hp_diva_init(struct pci_dev *dev)
static int
pci_hp_diva_setup(struct serial_private *priv,
const struct pciserial_board *board,
- struct uart_port *port, int idx)
+ struct uart_8250_port *port, int idx)
{
unsigned int offset = board->first_offset;
unsigned int bar = FL_GET_BASE(board->flags);
@@ -370,7 +370,7 @@ static void __devexit pci_ni8430_exit(struct pci_dev *dev)
/* SBS Technologies Inc. PMC-OCTPRO and P-OCTAL cards */
static int
sbs_setup(struct serial_private *priv, const struct pciserial_board *board,
- struct uart_port *port, int idx)
+ struct uart_8250_port *port, int idx)
{
unsigned int bar, offset = board->first_offset;

@@ -525,7 +525,7 @@ static int pci_siig_init(struct pci_dev *dev)

static int pci_siig_setup(struct serial_private *priv,
const struct pciserial_board *board,
- struct uart_port *port, int idx)
+ struct uart_8250_port *port, int idx)
{
unsigned int bar = FL_GET_BASE(board->flags) + idx, offset = 0;

@@ -619,7 +619,7 @@ static int pci_timedia_init(struct pci_dev *dev)
static int
pci_timedia_setup(struct serial_private *priv,
const struct pciserial_board *board,
- struct uart_port *port, int idx)
+ struct uart_8250_port *port, int idx)
{
unsigned int bar = 0, offset = board->first_offset;

@@ -653,7 +653,7 @@ pci_timedia_setup(struct serial_private *priv,
static int
titan_400l_800l_setup(struct serial_private *priv,
const struct pciserial_board *board,
- struct uart_port *port, int idx)
+ struct uart_8250_port *port, int idx)
{
unsigned int bar, offset = board->first_offset;

@@ -754,7 +754,7 @@ static int pci_ni8430_init(struct pci_dev *dev)
static int
pci_ni8430_setup(struct serial_private *priv,
const struct pciserial_board *board,
- struct uart_port *port, int idx)
+ struct uart_8250_port *port, int idx)
{
void __iomem *p;
unsigned long base, len;
@@ -781,7 +781,7 @@ pci_ni8430_setup(struct serial_private *priv,

static int pci_netmos_9900_setup(struct serial_private *priv,
const struct pciserial_board *board,
- struct uart_port *port, int idx)
+ struct uart_8250_port *port, int idx)
{
unsigned int bar;

@@ -1035,7 +1035,7 @@ static int pci_oxsemi_tornado_init(struct pci_dev *dev)
static int
pci_default_setup(struct serial_private *priv,
const struct pciserial_board *board,
- struct uart_port *port, int idx)
+ struct uart_8250_port *port, int idx)
{
unsigned int bar, offset = board->first_offset, maxnr;

@@ -1057,15 +1057,15 @@ pci_default_setup(struct serial_private *priv,
static int
ce4100_serial_setup(struct serial_private *priv,
const struct pciserial_board *board,
- struct uart_port *port, int idx)
+ struct uart_8250_port *port, int idx)
{
int ret;

ret = setup_port(priv, port, 0, 0, board->reg_shift);
- port->iotype = UPIO_MEM32;
- port->type = PORT_XSCALE;
- port->flags = (port->flags | UPF_FIXED_PORT | UPF_FIXED_TYPE);
- port->regshift = 2;
+ port->port.iotype = UPIO_MEM32;
+ port->port.type = PORT_XSCALE;
+ port->port.flags = (port->port.flags | UPF_FIXED_PORT | UPF_FIXED_TYPE);
+ port->port.regshift = 2;

return ret;
}
@@ -1073,16 +1073,16 @@ ce4100_serial_setup(struct serial_private *priv,
static int
pci_omegapci_setup(struct serial_private *priv,
const struct pciserial_board *board,
- struct uart_port *port, int idx)
+ struct uart_8250_port *port, int idx)
{
return setup_port(priv, port, 2, idx * 8, 0);
}

static int skip_tx_en_setup(struct serial_private *priv,
const struct pciserial_board *board,
- struct uart_port *port, int idx)
+ struct uart_8250_port *port, int idx)
{
- port->flags |= UPF_NO_TXEN_TEST;
+ port->port.flags |= UPF_NO_TXEN_TEST;
printk(KERN_DEBUG "serial8250: skipping TxEn test for device "
"[%04x:%04x] subsystem [%04x:%04x]\n",
priv->dev->vendor,
@@ -1131,11 +1131,11 @@ static unsigned int kt_serial_in(struct uart_port *p, int offset)

static int kt_serial_setup(struct serial_private *priv,
const struct pciserial_board *board,
- struct uart_port *port, int idx)
+ struct uart_8250_port *port, int idx)
{
- port->flags |= UPF_BUG_THRE;
- port->serial_in = kt_serial_in;
- port->handle_break = kt_handle_break;
+ port->port.flags |= UPF_BUG_THRE;
+ port->port.serial_in = kt_serial_in;
+ port->port.handle_break = kt_handle_break;
return skip_tx_en_setup(priv, board, port, idx);
}

@@ -1151,9 +1151,9 @@ static int pci_eg20t_init(struct pci_dev *dev)
static int
pci_xr17c154_setup(struct serial_private *priv,
const struct pciserial_board *board,
- struct uart_port *port, int idx)
+ struct uart_8250_port *port, int idx)
{
- port->flags |= UPF_EXAR_EFR;
+ port->port.flags |= UPF_EXAR_EFR;
return pci_default_setup(priv, board, port, idx);
}

@@ -2728,7 +2728,7 @@ serial_pci_matches(const struct pciserial_board *board,
struct serial_private *
pciserial_init_ports(struct pci_dev *dev, const struct pciserial_board *board)
{
- struct uart_port serial_port;
+ struct uart_8250_port uart;
struct serial_private *priv;
struct pci_serial_quirk *quirk;
int rc, nr_ports, i;
@@ -2768,22 +2768,22 @@ pciserial_init_ports(struct pci_dev *dev, const struct pciserial_board *board)
priv->dev = dev;
priv->quirk = quirk;

- memset(&serial_port, 0, sizeof(struct uart_port));
- serial_port.flags = UPF_SKIP_TEST | UPF_BOOT_AUTOCONF | UPF_SHARE_IRQ;
- serial_port.uartclk = board->base_baud * 16;
- serial_port.irq = get_pci_irq(dev, board);
- serial_port.dev = &dev->dev;
+ memset(&uart, 0, sizeof(uart));
+ uart.port.flags = UPF_SKIP_TEST | UPF_BOOT_AUTOCONF | UPF_SHARE_IRQ;
+ uart.port.uartclk = board->base_baud * 16;
+ uart.port.irq = get_pci_irq(dev, board);
+ uart.port.dev = &dev->dev;

for (i = 0; i < nr_ports; i++) {
- if (quirk->setup(priv, board, &serial_port, i))
+ if (quirk->setup(priv, board, &uart, i))
break;

#ifdef SERIAL_DEBUG_PCI
printk(KERN_DEBUG "Setup PCI port: port %lx, irq %d, type %d\n",
- serial_port.iobase, serial_port.irq, serial_port.iotype);
+ uart.port.iobase, uart.port.irq, uart.port.iotype);
#endif

- priv->line[i] = serial8250_register_port(&serial_port);
+ priv->line[i] = serial8250_register_8250_port(&uart);
if (priv->line[i] < 0) {
printk(KERN_WARNING "Couldn't register serial port %s: %d\n", pci_name(dev), priv->line[i]);
break;
diff --git a/drivers/tty/serial/8250/8250_pnp.c b/drivers/tty/serial/8250/8250_pnp.c
index a2f2365..fde5aa6 100644
--- a/drivers/tty/serial/8250/8250_pnp.c
+++ b/drivers/tty/serial/8250/8250_pnp.c
@@ -424,7 +424,7 @@ static int __devinit serial_pnp_guess_board(struct pnp_dev *dev, int *flags)
static int __devinit
serial_pnp_probe(struct pnp_dev *dev, const struct pnp_device_id *dev_id)
{
- struct uart_port port;
+ struct uart_8250_port uart;
int ret, line, flags = dev_id->driver_data;

if (flags & UNKNOWN_DEV) {
@@ -433,32 +433,32 @@ serial_pnp_probe(struct pnp_dev *dev, const struct pnp_device_id *dev_id)
return ret;
}

- memset(&port, 0, sizeof(struct uart_port));
+ memset(&uart, 0, sizeof(uart));
if (pnp_irq_valid(dev, 0))
- port.irq = pnp_irq(dev, 0);
+ uart.port.irq = pnp_irq(dev, 0);
if (pnp_port_valid(dev, 0)) {
- port.iobase = pnp_port_start(dev, 0);
- port.iotype = UPIO_PORT;
+ uart.port.iobase = pnp_port_start(dev, 0);
+ uart.port.iotype = UPIO_PORT;
} else if (pnp_mem_valid(dev, 0)) {
- port.mapbase = pnp_mem_start(dev, 0);
- port.iotype = UPIO_MEM;
- port.flags = UPF_IOREMAP;
+ uart.port.mapbase = pnp_mem_start(dev, 0);
+ uart.port.iotype = UPIO_MEM;
+ uart.port.flags = UPF_IOREMAP;
} else
return -ENODEV;

#ifdef SERIAL_DEBUG_PNP
printk(KERN_DEBUG
"Setup PNP port: port %x, mem 0x%lx, irq %d, type %d\n",
- port.iobase, port.mapbase, port.irq, port.iotype);
+ uart.port.iobase, uart.port.mapbase, uart.port.irq, uart.port.iotype);
#endif

- port.flags |= UPF_SKIP_TEST | UPF_BOOT_AUTOCONF;
+ uart.port.flags |= UPF_SKIP_TEST | UPF_BOOT_AUTOCONF;
if (pnp_irq_flags(dev, 0) & IORESOURCE_IRQ_SHAREABLE)
- port.flags |= UPF_SHARE_IRQ;
- port.uartclk = 1843200;
- port.dev = &dev->dev;
+ uart.port.flags |= UPF_SHARE_IRQ;
+ uart.port.uartclk = 1843200;
+ uart.port.dev = &dev->dev;

- line = serial8250_register_port(&port);
+ line = serial8250_register_8250_port(&uart);
if (line < 0)
return -ENODEV;

diff --git a/drivers/tty/serial/8250/serial_cs.c b/drivers/tty/serial/8250/serial_cs.c
index 29b695d..b7d48b3 100644
--- a/drivers/tty/serial/8250/serial_cs.c
+++ b/drivers/tty/serial/8250/serial_cs.c
@@ -73,7 +73,7 @@ struct serial_quirk {
unsigned int prodid;
int multi; /* 1 = multifunction, > 1 = # ports */
void (*config)(struct pcmcia_device *);
- void (*setup)(struct pcmcia_device *, struct uart_port *);
+ void (*setup)(struct pcmcia_device *, struct uart_8250_port *);
void (*wakeup)(struct pcmcia_device *);
int (*post)(struct pcmcia_device *);
};
@@ -105,9 +105,9 @@ struct serial_cfg_mem {
* Elan VPU16551 UART with 14.7456MHz oscillator
* manfid 0x015D, 0x4C45
*/
-static void quirk_setup_brainboxes_0104(struct pcmcia_device *link, struct uart_port *port)
+static void quirk_setup_brainboxes_0104(struct pcmcia_device *link, struct uart_8250_port *uart)
{
- port->uartclk = 14745600;
+ uart->port.uartclk = 14745600;
}

static int quirk_post_ibm(struct pcmcia_device *link)
@@ -343,25 +343,25 @@ static void serial_detach(struct pcmcia_device *link)
static int setup_serial(struct pcmcia_device *handle, struct serial_info * info,
unsigned int iobase, int irq)
{
- struct uart_port port;
+ struct uart_8250_port uart;
int line;

- memset(&port, 0, sizeof (struct uart_port));
- port.iobase = iobase;
- port.irq = irq;
- port.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_SHARE_IRQ;
- port.uartclk = 1843200;
- port.dev = &handle->dev;
+ memset(&uart, 0, sizeof(uart));
+ uart.port.iobase = iobase;
+ uart.port.irq = irq;
+ uart.port.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_SHARE_IRQ;
+ uart.port.uartclk = 1843200;
+ uart.port.dev = &handle->dev;
if (buggy_uart)
- port.flags |= UPF_BUGGY_UART;
+ uart.port.flags |= UPF_BUGGY_UART;

if (info->quirk && info->quirk->setup)
- info->quirk->setup(handle, &port);
+ info->quirk->setup(handle, &uart);

- line = serial8250_register_port(&port);
+ line = serial8250_register_8250_port(&uart);
if (line < 0) {
- printk(KERN_NOTICE "serial_cs: serial8250_register_port() at "
- "0x%04lx, irq %d failed\n", (u_long)iobase, irq);
+ pr_err("serial_cs: serial8250_register_8250_port() at 0x%04lx, irq %d failed\n",
+ (unsigned long)iobase, irq);
return -EINVAL;
}

diff --git a/include/linux/serial_8250.h b/include/linux/serial_8250.h
index a416e92..f41dcc9 100644
--- a/include/linux/serial_8250.h
+++ b/include/linux/serial_8250.h
@@ -69,7 +69,6 @@ struct uart_port;
struct uart_8250_port;

int serial8250_register_8250_port(struct uart_8250_port *);
-int serial8250_register_port(struct uart_port *);
void serial8250_unregister_port(int line);
void serial8250_suspend_port(int line);
void serial8250_resume_port(int line);

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/