[PATCH 6/9] powerpc/PCI: move final fixup quirks from __init to__devinit

[Myron Stowe]

The PCI subsystem's final fixups are executed once during boot, after the
pci-device is found.  As long as the system does not support hot-plug,
specifying __init is fine.

With hot-plug, either physically based hot-plug events or pseudo hot-plug
events such as "echo 1 > /sys/bus/pci/rescan", it is possible to remove a
PCI bus during run time and have it rediscovered which will require the
call of the fixups again in order for the device to function properly.

This patch prepares specific quirk(s) for use with hot-plug events.

Signed-off-by: Myron Stowe <myron.stowe@xxxxxxxxxx>
---

 arch/powerpc/platforms/powermac/pci.c |    2 +-
 1 files changed, 1 insertions(+), 1 deletions(-)

diff --git a/arch/powerpc/platforms/powermac/pci.c b/arch/powerpc/platforms/powermac/pci.c
index 43bbe1b..6b09dd7 100644
--- a/arch/powerpc/platforms/powermac/pci.c
+++ b/arch/powerpc/platforms/powermac/pci.c
@@ -1173,7 +1173,7 @@ void __init pmac_pcibios_after_init(void)
 	}
 }
 
-void pmac_pci_fixup_cardbus(struct pci_dev* dev)
+static void __devinit pmac_pci_fixup_cardbus(struct pci_dev *dev)
 {
 	if (!machine_is(powermac))
 		return;

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/