[PATCH 3/9] arm/PCI: move final fixup quirks from __init to __devinit

[Myron Stowe]

The PCI subsystem's final fixups are executed once during boot, after the
pci-device is found.  As long as the system does not support hot-plug,
specifying __init is fine.

With hot-plug, either physically based hot-plug events or pseudo hot-plug
events such as "echo 1 > /sys/bus/pci/rescan", it is possible to remove a
PCI bus during run time and have it rediscovered which will require the
call of the fixups again in order for the device to function properly.

This patch prepares specific quirk(s) for use with hot-plug events.

Signed-off-by: Myron Stowe <myron.stowe@xxxxxxxxxx>
---

 arch/arm/mach-iop32x/n2100.c |    2 +-
 1 files changed, 1 insertions(+), 1 deletions(-)

diff --git a/arch/arm/mach-iop32x/n2100.c b/arch/arm/mach-iop32x/n2100.c
index 5a7ae91..04c4110 100644
--- a/arch/arm/mach-iop32x/n2100.c
+++ b/arch/arm/mach-iop32x/n2100.c
@@ -126,7 +126,7 @@ static struct hw_pci n2100_pci __initdata = {
  * the ->broken_parity_status flag for both ports so that the r8169
  * driver knows it should ignore error interrupts.
  */
-static void n2100_fixup_r8169(struct pci_dev *dev)
+static void __devinit n2100_fixup_r8169(struct pci_dev *dev)
 {
 	if (dev->bus->number == 0 &&
 	    (dev->devfn == PCI_DEVFN(1, 0) ||

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/